DY Light DY-200W-12/24/48-A LED Switch Power Supply Owner’s Manual
- June 13, 2024
- DY Light
Table of Contents
DY Light DY-200W-12/24/48-A LED Switch Power Supply
Product Information
The DY-200W-12/24/48-A is an indoor installation power supply designed for LED lighting. It comes with various protections including short circuit, overload, and over temperature. The product utilizes natural air cooling for efficient heat dissipation. It has undergone a 100% full load burn-in test and comes with a 3-year warranty. The power supply is available in three variants: DY- 200W-12-A, DY-200W-24-A, and DY-200W-48-A. For more information, visit www.dylights.com.
Product Usage Instructions
- DC Voltage: The power supply operates on DC voltage.
- Rated Current: The rated current varies depending on the variant of the power supply.
- Current Range: The power supply can handle a range of currents within its specified limits.
- DC Output Power: The power supply can deliver a maximum output power based on its variant.
- Ripple & Noise: The maximum ripple and noise levels are mentioned in the specifications.
- Load Stability: The power supply maintains stability when subjected to varying loads.
- Voltage Tolerance: There is a specified tolerance for the input voltage.
- Setup, Rise Time: The time taken for the power supply to reach its stable operating state after being turned on is mentioned.
- Hold Up Time: The power supply can maintain output voltage within specified limits during a power interruption.
- Voltage Range: The power supply can operate within a specified range of input voltages.
- Frequency Range: The power supply can operate within a specified range of input frequencies.
- AC Current: The typical AC current consumption of the power supply is mentioned.
- Inrush Current: The power supply may experience a surge in current when initially turned on.
- Incoming Line Stability: The power supply maintains stability when subjected to variations in the input voltage.
- Power Factor: The typical power factor of the power supply is mentioned.
- Efficiency: The typical efficiency of the power supply is mentioned.
- Leakage Current: The maximum leakage current is mentioned.
- Working Temperature: The recommended operating temperature range for the power supply is mentioned.
- Working Humidity: The recommended operating humidity range for the power supply is mentioned.
- Storage Temperature, Humidity: The recommended storage temperature and humidity conditions for the power supply are mentioned.
- Temp. Coefficient: The temperature coefficient of the power supply is specified.
- Vibration: The power supply is tested for vibration resistance according to specified standards.
- Aging Test: The power supply undergoes an aging test to ensure its reliability over time.
- Withstand Voltage: The power supply can withstand specified voltages without any issues.
- Isolating Resistance: The isolating resistance between input and output is mentioned.
- EMC Emission: The power supply complies with EMC emission standards.
- EMC Immunity: The power supply complies with EMC immunity standards.
- Safety Standards: The power supply complies with safety standards.
- Others: The mechanical specifications including dimensions, carton quantity, carton size, and weight of the power supply are mentioned.
Features
- Design for indoor installation
- Protections: Short circuit/Overload/Over temperature
- Product cooling way: Natural air cooling
- 100% full load burn-in test
- Suitable for LED lighting
- Mute without interference
- 3 years warranty
Warranty
- 3 years warranty
Specifications
PROTECTION
| Short circuit| The power supply can resume normal operation when the short
circuit is removed during power supply.
---|---|---
Overload
| 105%-150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is
removed
Over Current| After the over-current fault is removed, the power supply will
automatically resume normal operation.
Over Temperature| Ambient Temperature 70℃ ± 10%
Protection mode; the product is hiccup state, protect the product from damage,
when the fault is ruled out, the power supply is normal
ENVIRONMENT
| Working temp.| -10℃ ~ +55℃( Refer to“derating curve”)
Working humidity| 20% ~90%RH non-condensing
Storage temp. , humidity| -40℃ ~ +85℃， 10% ~95%RH
Temp. coefficient| ±0.03%℃(0-5℃)
Vibration| 10-500Hz, 2G 10min. / 1 cycle, 60 min. each axes
SAFETY & EMC
| Aging test| Input voltage: 220 V 50 HZ Rated output current 25 ℃, Burn-
in 2h
Withstand voltage| Input and output: 1.5KVAC 5mA 3s input and shell;
1.5KVAC 5mA 3s
Isolating resistance| Between input and output, input and shell: 500 VDC
/ 100 MΩ
EMC emission| /
EMC immunity| /
Safety standards| /
NOTE
| All parameters NOT specially mentioned are measured at 23 0 VAC input,
rated load and 25 ℃ of ambient temperature.
Ripple & noise are measured at 20 MHz of bandwidth by using a 12 ” twisted
pair- wire terminated with a 0. 1 uf &47 uf parallel capacitor.
Tolerance: includes set up tolerance. Line regulation and load regulation.
Length of set up time is measured at first cold start . Turning ON/ OFF the
power supply may lead to an increase of the set up time.
Block Diagram
Output Derating
Output Derating VS Input Voltage
Mechanical Specification
Others
- Dimension: 180X42X25(mm)
- Carton quantity: 60pcs/Carton
- Carton size: 3827.518(cm)
- Weight: 217g/pcs
Guangdong Dingying Lighting Technology Co. , Ltd