Westgate 72381-66-L 1-Light Black Outdoor LED Wall Mount Instruction Manual
- June 13, 2024
- WESTGATE
Table of Contents
Westgate 72381-66-L 1-Light Black Outdoor LED Wall Mount Instruction
Manual
For Model 72381-66-L;72382-66-L;72383-66
WA R N I N G ! S H U T P O W E R O F F A T F U S E O R C I R C U I T B R E A K E R .
HANGING THE FIXTURE (Fig. 1)
- Shut off the power at the circuit breaker and remove the old fixture, including the mounting hardware.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Attach the crossbar (C) to outlet box (A) (not supplied) with mounting screws (B) (Size: #8-32*0.78″L)
- Thread all thread (D) into crossbar (C) and secure with hex nut provided (J). Note: The length of all thread (D) into crossbar (C) may be adjusted if necessary.
CONNECTING THE WIRES (Fig. 2)
5. Connect the electrical wires as shown in Fig.2 making sure that all wire
connectors are secured. If your outlet box has a ground wire (green or bare
copper), connect the fixture’s ground wire to it.
Otherwise, connect the fixture’s ground wire directly to crossbar using green
screw provided.
COMPLETING THE INSTALLATION (Fig. 1)
6. Remove frame (I) by loosening the 4 screws (G).
Place backplate (E) overall thread (D) and secure with decorative nut (F).
7. Use the 4 screws (G) to secure frame (I) back onto backplate (E).
8. To prevent moisture from entering outlet box and causing a short, use
clear caulking (i.e.
Indoor/Outdoor Silicone Sealant) to outline the outside of fixture backplate
where it meets the wall leaving a space at bottom to allow moisture a means to
escape. (Fig. 3)
9. Bulb (H) information: Integrated LED module
1 x AC LED 6W included for 72381-66-L.
1 x AC LED 10W included for 72382-66-L; 72383-66-L.
DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Your installation is now complete. Return power to the junction box and test the fixture.
Read More About This Manual & Download PDF: