ROYALAXE B0CFHQHJVB X ProtoArc Y98 Wireless RGB Mechanical Gaming Keyboard User Manual

Y98
BT 30/8T 50/24/Wired Thvee Mode Mecharical Gaming Keybosrd
Co-created by ProtoArc x RoyalAxe
USER MANUAL

B0CFHQHJVB X ProtoArc Y98 Wireless RGB Mechanical Gaming Keyboard

Function overview of the keyboard

1. Fn+ :Reset
2. Fn+ : Screen brightness –
3. Fn+ : Screen brightness +
4. Fn+ : Multi screen display
5. Fn+   : Back to the desktop
6. Fn+ : Media Player
7. Fn+ : Play/Pause
8. Fn+ : Prey song
9. Fn+ : Next song
10. Fn+   : Mute
11. Fn+  : Volume –
12. Fn+ :Volume +
13. Fn+ : Input method switching
14. Fn+ : Light switch
15. Fn+   : Switch the backlight mode
16. Capl Lock Caps lock indicator Num Lock Num Lock indicator   Low battery indicator
17.   Wired mode 2.4G wireless mode BT Bluetooth mode
18. Fn+ : Bluetooth mode 1
19. Fn+ : Bluetooth mode 2
20. Fn+ : Bluetooth mode 3
21. Fn+   : Switch to lOS system
22. Fn+   : Switch to MAC system
23. Fn+   : Switch to WIN system
24. Fn+ : Monochromatic light switching
25. Fn+   : Backlight frequency slows down
26. Fn+ : Backlight brightness increase
27. Fn+ : Backlight frequency slows down
28. Fn+ cf, : Increased backlight frequency
29. 2.4G receiver
30. ON/OFF power switch
31. Type-C charging/wired interface

Wired Connection

1. Connect the TYPE-C end of the charging cable to the keyboard and the USB end to your computer.
2. Rotate to Wired Mode, indicator willflash for successful connection.
   Note ‘ON/OFF” switch has no function in Type-C wired mode.

2.4G Connection

1. Turn power switch ON.
2. Insert receiver into computer’s USB port.
3. Rotate knob to 2.4G mode, indicator flashes twice for successful connection.

Bluetooth Connection

1. Tum power switch ON, rotate knob to BT mode, indicator flashes 3 times for successful setup.
2. Press Fn + Q for 3-5 secs to enter Bluetooth pairing mode, quick flashing indicator.
3. Tum on computer’s Bluetooth, search and select *Y68 BT3.0″ or “Y68 BTS.0,” pair until connection complete.

Notice:

• Windows 7 and below do not support Bluetooth 5.0
• Device number for BT 3.0 is “L9B BT3.0,” for BT 5.0is “L98 BT5.0.”

Mode Switching Method of The Keyboard

1. Mode Channel: The keyboard has 5 channels (BT2, BT3, 2.4G, wired), and can connect up to 5 devices simultancously.
2. Mode Rotary Knob: To switch between modes, turn the mode rotary knob betieen Wired/2.4G/BT. To switch between BT1, BT2, and BT3 Bluetooth channels, press Fn +Q, W, orE.

10S / Mac / Win layout switching
Shor press to sitch system layout

Note: the default setting is windoes layout

Charging Guide

1. Low voltage indicated by red flashing light.
2. Insert Type-C into keyboard, USB into computer to charge, red light stays on during charging. 3. Green light indicates charging is complete.
   Notice: During charging, “ON/OFF” switch has no control, power comes directly from charging cable.

Custom Drive

For custom mode please go to the folowing URL to download official driver. https://www.protoarc.com
Note: Driver only supports customization and 2.4G mode.
Technical Specifications
Connection methods: Wired. 2AGHz.
Bluetooth 3.0,
Bluetooth 5.0
Wireless range: 2.4GHz (15 meters),
Bluetooth (10 meters)
Current and voltage: 5V, 500mA (max) Keys: 98
Keycap material: PBT Mechanical switch lifespan: 100 million times Lithium
Battery: 4000mA
Keyboard size: 392x145x41mm
Weight: 1465g ± 20g
System Requirements

1. lx USB port
2. Bluetooth 3.0 or 5.0
3. Compatible with Windows 718/10, Android 3.2 or later, Mac OS 10.5 or later.
   Note: Multimedia functions are partially invalid in different OS versions.

Troubleshooting

1. Check that the USB wireless receiver is properly connected to the computer’s USB port.
2. Ensure the computer meets the minimum system requirements.
3. If the product is too far from the receiver, bring them closer for better performance.

Attention

1. Clean product with dry and soft cloth.
2. Do not disassemble by force.
3. Avoid exposure to rain, sun, and fire.
4. Do not rinse with water.
5. Charge keyboard only using USB interface of computer, not with charger.
6. Keep liquid away from product to prevent short circuit.

Shaft Replacement

Important safety and compliance information

Disposal of product and packing material
Waste Electrical and Electronic Equipment-WEEE This product must not be thrown away with household waste. Instead, dispose of it properly by taking it to a designated colection point for waste electrical and electronic equipment (WEEE) recycling. This helps conserve natural resources and ensures proper recycling that protects health and the environment For recycling location information, please reach out to your local city office, household waste disposal service, or the store where you purchased the product.
CE Declaration of Conformity
This device complies with Electromagnetic Compatibility Directive (2014/30/EU), ROHS Directive (2011/65/EU), and Radio Equipment Directive (2014/53/EU). Testing shows compliance with harmonized standards for Information Technology Equipment as outlined in the EU Official Journal. Federal Communications Commission ( FCC ) Notice This equipment has been tested and complies with Class B digital device limits under Part 15 of the FCC Rules. It is designed to provide reasonable protection against interference in a residential setting. If not installed and used as instructed. it may cause radio interference. If the equipment interferes with radio or TV reception, the user should try to resolve it by:

• Reorienting or relocating the receiving antenna.
• Increasing the distance between the equipment and receiver.
• Plugging the equipment into a different circuit than the receiver.
• Consulting the dealer or a radio/TV technician. Unauthorized changes or modifications may render the user unable to operate the equipment.

THIS CLASS B DIGITAL DEVICE COMPLIES WITH CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules and operates within the following two conditions:

1. This device must not cause harmful interference.
2. This device must accept at interference received, including any that may cause undesired operation.

Dear customer,
Thank you for purchasing a ROYALAXE product. To ensure a reliable after- sales service, please carefully read the following instructions. This product warranty is valid for one year from the date of purchase (as indicated on the return receipt and invoice).
The following are not covered by this product’s after-sales service:

1. Invalid warranty card/invoice or altered warranty without authorization.
2. Inconsistency between warranty card/product model & serial number, or absence of distributor seal.
3. Altered, removed or made illegible model, serial number or production date code.
4. Excessive use outside intended purpose (e.g. commercial non-stop use).
5. Damage from not using the product according to instructions.
6. Damage from using pirated software or computer virus.
7. Damage from accident, abuse, or unauthorized repair.
8. Force majeure damage.
9. Improper operation due to accidental disconnection, signal interference, or other external factors.
10. Normal wear and tear or consumable parts.
11. Improper function due to use in a country where product wasn’t designed, manufactured or approved.

For defective or non-functioning products, please contact your local retailer. The warranty card with the matching serial number is required for after-sales service and technical support. Keep the warranty card safe. Professional and quality services will be provided upon presentation of the card.

Commodity Information| Name|
---|---|---
Place of origin|
Model No.|
Serial No.|
User info.| Name|
Address|
Tel.|
Postcode|
Sales Info.| Retailer|
Address|
Tel.|
Postcode|
Sale date|
Invoice NO.|
Stamp & Signature|
Dearcustomectheatovenfonenonisto befittedInbytheseder. Please cocceate with us Thar0<youi Thefollowingtiumutlugi shall be filled in try inemainten ance agencv and reluned bat necustomer.
Maintenance Info.| Maintenance company name|
Address|
Tet.|
Postcode|
Document No.|
Date|
Signature|

Customer Support :
Email: [email protected]
Co-created by ProtoArc x RoyalAxe
Manufacturer: Dongguan Lingjie Electronics & Technology Co., Ltd
Address: No. 23 Zhenxing North Road, Xiegang Town,
Dongguan,Guangdong, China
Web: https://www.protoarc.com
Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>