SZ-WL1 Wireless Lavalier Microphone Instruction Manual
- June 13, 2024
- SZ
Table of Contents
Wireless Lavalier Microphone
Instruction Manual
INTRODUCTION
Thank you for purchasing the SZ -WL1/ SZ -WL2 Wireless Lavalier Microphone. To get the most out of your product, please read this manual carefully.
CONTENTS
SZ-WL1
- 1 x Charging Case.
- 1 x Carry case.
- 1 x Microphone Transmitter.
- 1 x Receiver.
- 1 x Type C-Charging Cable.
- 1 x Lightning adapter.
- 1 x User Manual
SZ-WL2
- 1 x Charging Case.
- 1 x Carry case.
- 2 x Microphone Transmitter.
- 1 x Receiver.
- 1 x Type C-Charging Cable.
- 1 x Lightning adapter.
- 1 x User Manual
FEATURES
- Wireless microphone system with professional audio recording solution for Type-C interface devices.
- User-friendly, with a simple plug-andplay setup.
- Rechargeable batteries and portable charging case to ensure continuous use.
- Built-in ANC (Active Noise Cancelling).
- Ideal for live-streaming, interviews, online lessons, and more.
FUNCTIONS
-
Mobile Interface
For connection to mobile phone via USB-C. Lightning port (iPhone) adapter included. -
Charging Port for Receiver
Port for external charging of transmitter. -
Receiver Status Indicator
Flashes when syncing. Solid colour when synced to Microphone transmitter. -
Clip
Used for attaching microphone to clothing (i.e. lapel or collar). -
Record start/Pause Switch Starts or pauses recording.
-
Power on/Mode switch
Turns the microphone power and ANC (Active Noise Cancelling) mode on. -
Windshield
To reduce wind/external noise for optimum clarity. -
Type C-Connector
A Type C connector is a USB-C connection used for audio output. It allows for the connection of external headphones with a Type C port for the purpose of monitoring the source audio signal -
Microphone status indicator Shows microphone is active.
-
Charging Port for Case
To charge the case use the USB charging cable supplied and connect via the charging port on the rear of the case.
SETTING UP
The wireless microphone system is a professional audio recording solution for
Type-C interface devices. The package includes one or two wireless lapel
microphones and a Type-C receiver, allowing for recording audio sources.
The system is designed to be userfriendly, with a simple plug-and-play setup.
The wireless microphones are equipped with rechargeablebatteries and
aportable charging case to ensure continuous use.
The built-in ANC (Active Noise Cancelling) noise reduction chip effectively
suppresses background noise to ensure high-quality audio recording. The system
is ideal for various professional applications such as live-streaming,
interviews, online lessons, and more.
HOW TO USE:
- Connect the receiver to the Type-C port of the mobile device by plugging it in. This will initiate the pairing process, indicated by the flashing blue light on the receiver.
- Take the microphone transmitter out of the charging case and press the button to activate it. The blue light on the transmitter will come on, signalling a successful pairing connection as the flashing light on the receiver stops.
- Start recording by activating the recording function on your mobile device. Adjust the volume as needed to ensure optimal audio quality.
- If necessary, activate the DSP noise reduction function by pressing the M button to further enhance audio clarity and suppress background noise.
- Use the pause button to pause or resume recording as required during the recording process.
Note : Some Android phones may require the use of a third party voice recording app in video mode to allow audio to be recorded.
SPECIFICATIONS
Receiver
Working
Frequency Band ………….2.4GHz – 2.4835GHz
Modulation Mode ………. GFSK
Frequency Response …….. 20-20KHz
Latency ……………….. 25ms
Sampling Rate ………….. 48K
Signal to Noise Ratio …….. -98db
Operation Distance ……… 10m
Power Supply ………….. 3.7V
Receiver can be charged 3 times before full charge is required
Microphone Battery Life ….. 10hr when fully
charged
Working Temperature ……. -10 ~ 50 degrees
Material ………………. ABS
Dimensions
(Lx Wx H) ……………… 4.4 x 2.5 x 0.7cm
Microphone Weight ……… 4.6g
Case
Charging Case Weight …… SZ-WL1 58.5g, SZ-WL2 68.5g
Dimensions
(Lx Wx H) ……………… SZ-WL1 9.3 x 6.3 x 2.9cm SZ-WL2 11.6 x 6.3 x 3.3cm
Transmitters
Working
Frequency Band ………… 2.4GHz – 2.4835GHz
Modulation Mode ………. GFSK
Transmission Power ……… 9db
Audio Input ……………. mic
Power Supply ………….. 3.7V
Transmitter can be charged 3 times before full charge is required
Microphone Battery Life ….. 10hr when fully charged
Working Temperature ……. -10 ~ 50 degrees
Material ………………. ABS
Dimensions
(Lx Wx H) ……………… 6.8 x 2 x 2cm
Microphone Weight ……… SZ-WL1 10g SZ-WL2 10g x 2
WARNING!
Do not open cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel Do not place the product in a location near a heat
source such as a radiator, or in an area subject to direct sunlight, excessive
dust, mechanical vibration or shock The product must not be exposed to
dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the product No naked flame sources, such as lighted candles,
should be placed on the product Allow adequate air circulation and avoid
obstructing vents (if present) to prevent internal heat build-up. The
ventillation must not be impeded by covering the appliance with items such as
newspapers, table-cloths, curtains etc. Do not attempt to remove the
rechargeable lithium-ion battery from this product. Contact a qualified
professional for removal.
KETTLESTRING LANE 1 YORK 1 Y030 4XF I UNITED KINGDOM
LAHNSTRABE 27 1 45478 MULHEIM AN DER RUHR 1 DEUTSCHLAND
If you have any more questions about this
product, please do not hesitate to contact the
Gear4music Customer Service Team on
+44 (0) 330 365 4444 or
info@gear4music.com
Documents / Resources
| SZ
SZ-WL1 Wireless Lavalier
Microphone
[pdf] Instruction Manual
SZ-WL1, SZ-WL2, SZ-WL1 Wireless Lavalier Microphone, Wireless Lavalier
Microphone, Lavalier Microphone, Microphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>