ASPERA R10 Smart Mobile User Manual

R10 Smart Mobile
User Manual

Technical specifications

• IP68 rated for waterproof/dustproof
• Octa-Core Processor – 8 x 2GHz
• 6.517” HD + IPS Display
• Powered by Android™ 13
• 3G 850/900/2100Mhz
• 4G Bands 1/3/5/7/8/28 a+b
• 13MPrear + 8MP front Camera
• Face ID unlock
• 4GB RAM & 128GB ROM (114GB available pace after operating system)
• 5100mAh Li-ion battery
• Dimensions: 175.680.713.3mm
• Micro SD card slot, expands storage capacity up to 256GB (Not included)

General and Safety Information

Profile
Please read this manual carefully to help you make the most of your phone. Aspera Mobile may change features of this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, please refer to your phone for details.
Lost Device
If your phone has been lost or stolen, notify your network service provider as soon as possible and ask for the SIM card to be disabled (network support is required). This can avoid economic loss caused by Unauthorised use.
Safety Warning – Road safety comes first!
Do not use the mobile phone in hand-held mode while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries/states, dialing or receiving calls while driving is illegal, regardless of hands-free status. You will need to ensure you are obeying road safety laws by checking the laws of the state/country you are driving in.
Switch off in aircraft
Wireless devices can cause interference in aircraft. Please make sure to only use your phone when switched to Aeroplan mode when in an aircraft. Go to Settings > Network Settings and tap on Aeroplan mode to switch on/off.
Switch off before entering risk areas
Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risk areas.
Turn off your mobile phone before entering a place susceptible to an explosion, such as an oil station, oil tank, chemical plant, or a place where a blasting process is under way.
Observe all special regulations
Follow any special regulations in force in any areas such as hospitals and always switch off your phone whenever it is forbidden to use it or when it may cause interference or danger. Use your mobile phone carefully near medical apparatuses, such as pacemakers, hearing aids and some other electronic medical devices, as it may cause interference to such apparatus.
Interference
The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located near the microphone. Do not touch the antenna area during a conversation; this will cause conversation quality to deteriorate.
Qualified service
Only qualified Aspera personnel or approved agents may install and/or repair phone Aspera equipment. Installing or repairing the mobile phone and/or parts by yourself may be dangerous and will lead to breakage of warranty terms.
Accessories and batteries
The Aspera R10 box will come with an Aspera charger. The recommended charging time for the Aspera R10 is three to four hours when the battery is low or depleted. We recommend to not leave it charging overnight, as this may damage or deteriorate the battery over time.
Please note the device is only warranted when used with Aspera authorised cables, plugs, and batteries supplied for this device.
Headset earphones The Aspera R10 box will include a pair of earphones. They are USB-C earphones and plug into the charge port. Ensure that the earphones are plugged into the port correctly to ensure clarity in the audio, and that the audio jack is clear of any obstructions or material.
Device Temperature
The Aspera R10 can become warm when completing different operations. These operations include, but are not limited to: Utilizing the wireless and mobile data functionalities for a multitude of purposes, including but not limited to video streaming, video recording, accessing the internet, tethering, and more.
Using the GPS function for navigation or location services Using the device in areas with weaker and/or no reception  If the device becomes warm, we recommend closing applications that are not in use, and to let the phone cool down naturally.
Emergency calls
Ensure the phone is switched on and has service reception, enter the emergency number (e.g., 000), then press the Dial key. Give your location and state your situation briefly and follow the instructions of service personnel. Do not end the call until told to do so.
The emergency number can be dialed with or without a sim card installed.
Precautions
This mobile phone has an intricate design, so please exercise special care when using it. The following suggestions will help your mobile phone survive the warranty period and extend its service life:
Keep the mobile phone and all its fittings beyond young children’s reach.
If exposing the phone to water or dust ensure the seals over charge port and sim tray are firmly in place.
Do not store the mobile phone in a high-temperature location. High temperature may shorten the life of electronic circuits and damage the battery and some plastic parts.
Do not store the mobile phone in extreme cold places. This may cause moisture to form inside the mobile phone and may damage electronic circuits when the mobile phone is moved to a constant temperature place.
Salt water is corrosive. If the phone is exposed to salt water be sure to wash the phone down after firmly closing all seals on the phone.
Getting to know your Aspera R10

1. The sim tray is placed above the On/Off button on the right of the phone. Remove the sim tray by inserting your finger nail into the slot below the tray, then simply lever the tray out. Place the nana sim card on the tray according to the shape of the tray, then re-insert the tray into the phone.
2.  The phone can take 2 nano sim cards, or one nano sim card and one SD card.
3. There is a speaker at top of the glass display, and a speaker on the back next to the rear camera.
4. Firmly close the seals on charge port and sim tray to protect from water and dust.
5. Volume controls are placed on the left side of the phone.
6.  A quick launch button is placed on the left of the phone, this can be programmed using the setting menu.
7.  There is a lanyard loop on the bottom left corner.
8. The USB-C charge port is also used to plug in the USB-C earphone jack.
9. The charge port is on the bottom of the phone. Lift the seal and insert the USB-C cable to charge the phone.

What’s in the Box
The Aspera R10 comes with the handset, earphones, USB-C cable, charging adapter, user guide, and warranty information.
Earphones – R10 uses the USB-C port for earphone usage, allowing for audio functions including music, videos and calls. The earphones also have a built- in microphone.
USB cable – Can be used with the wall plug to charge the phone. Can also be used to connect your device to a Windows computer for file transfers and further functionality.
Charging adapter – Connects to a power outlet and used in conjunction with the USB-C cable to charge the phone.

Getting Started

Please make sure the Aspera R10 has charge before beginning the setup process.
Press and hold the power button for five seconds, and the phone will begin the start-up process. Let go of the power button at this stage.
After the phone has finished starting up, it will display a Welcome screen. Select the language you wish to use on the phone, then tap “Start”. If the SIM card has not been inserted correctly, it will ask you to insert the SIM card. If there is no SIM card in the phone, you can skip this step.
You can connect to a Wi-Fi network to continue setup or skip this step if you do not wish to pursue any backup/restoring options for now.
If you do not connect to a wireless network, you will need to manually adjust date and time, and setup the device “as new” from the list of Google Services onwards.
If you do connect to a wireless network, the phone will need to check for necessary updates, and this may take some time.
If you do decide to connect to a wireless network, you will have the option of Copying Apps & Data over to the Aspera R10.
If you decide to setup the device as new:
Select “Do Not Copy” You can opt to sign into a Google Account, or skip this selection.
There will be a list of Google Services, you can enable or disable some of these to your choosing by tapping on the radio button. Tap “Next” to continue.
You may choose to setup a security measure, including a pattern, PIN, password, and/or fingerprint sensor.
Warning: Please keep a note of the PIN, Password, or Pattern used to lock/unlock the phone. If you lose this, you may lose access into the device due to the security protocols of Android.
Your device is ready to be used.
If you decide to setup the device from a backup/copy:
Please ensure that you follow the on-screen prompts if you do decide to back- up from either a different device or previous copy, as the instructions will change.
Please note that you cannot restore a backup from a higher Android version into a lower Android version. The Aspera R10 runs on Android 13.
For any further documentation please visit Google’s support portal on back-up and restore, which can be located here – https://support.google.com/android/answer/2819582?hl=en

Introduction to Aspera R10

Interaction – The Aspera R10 operates mainly from interactions on the touch screen and detects finger pressure and direction to then operate the software.
Your main controls will be tapping, holding, and swiping on the screen with your fingers. Most methods rely only on a single finger making the interaction, so beware of your other fingers or your hands interfering with input if they are close to the edge of the device.
Lock Screen – When your phone is on standby and/or idle mode and the screen has switched off, you can wake the screen to land into the Lock Screen by pressing the power button once.
Depending on your security settings, you may need to either Swipe upwards on the screen with one finger, input a PIN code, or input a password to pass the Lock Screen and enter the Home Screen.
Home Screen – When your device has been unlocked, you will land onto the Home Screen, which has your application shortcuts and your primary applications available for use.  Notification and Quick Access Panel – Used to quickly access key settings, such as Wi-Fi, Bluetooth, Do not disturb and Torch
Can be accessed by swiping one finger in a downwards motion from the top of the screen when the phone is unlocked and on the Home Screen.
Once opened, you can quickly enable and disable these options by tapping on them once.
To go into the respective icon’s advanced options, tap and hold one finger on the icon until your phone transitions to the advanced options screen.

1. Wireless Networks
2.  Mobile Network Data
3.  Bluetooth
4.  Hotspot
5.  Flashlight/Torch
6.  Aeroplane Mode
7.  Notifications

For notifications (7), you can remove them by holding one finger on them and swiping to the left. You can swipe one finger down again after this to bring down an advanced Panel, which has access to more settings.
The advanced panel allows you to see what the icons are and allow you to adjust brightness and further additional settings.
To access additional settings, swipe one finger from the right side of the screen to the left.
Screenshot – You can quickly take a photo of what is currently on your device screen by holding the power and volume down buttons together for three seconds.
Alternatively, you can hold the power button for three seconds to bring up the option of taking up a screenshot on the right side of the screen.
Navigation Buttons and Task Manager – Depending on the context of the screen, you will have three buttons to use at the bottom of the screen.
The triangle, located at the bottom left, is the back button. This will take you to the previous screen you were on.
You may see this triangle shift when using a keyboard or input method. Tapping this when the triangle is pointing downwards will remove the keyboard/input method.
The circle, located in the middle, takes you back to the Home Screen when tapped once.
Press and hold the circle button to get started with Google Assistant. Google Assistant is deeply integrated with your Android phone so you can control your apps, your phone, and your connected home faster, using just your voice. For more information regarding Google Assistant, please visit https://assistant.google.com The square, located in the bottom-right, opens up Android Task Manager. This allows you to open previously accessed applications, while also allowing you to free up memory by closing applications running in the background.
You can close all applications running in the background by tapping the “Clear all” icon located at the bottom of the screen.
Applications Menu – All the applications can be accessed in the applications menu. When on the home screen, swipe your finger upwards from the middle of the screen, taking care to not press any application shortcuts.
In this screen, you can tap an icon to open an application. To search for a particular application, tap on the “Search Apps” bar, and type in the name (or partial name) of the application.
For further functionality in this menu regarding creating shortcuts and un- installing non-core applications, please see the section “Applications” and “ Application Shortcuts” below.

Basic Functionality

Locking and Unlocking your Device
Locking the device when not in use prevents accidental operation of the screen and preserves battery time. To lock the device: Press the lock button on the right side of the Aspera R10 once when the screen is open and displaying images. This will switch off the screen and restrict any inputs from being made on the screen.
To unlock the device:
Press the lock button on the right side of the Aspera R10 once to wake up the screen. Upon waking up the screen, swipe up from the bottom of the screen. If you have placed a PIN/password/swipe pattern as a lock, you will need to input the PIN/password/swipe pattern set to unlock the device and access the Home Screen.
Face unlock can be used either in the locked notification screen or the lockscreen which displays pin code or pattern. You can choose how face unlock operates in the face unlock settings page.
The phone screen will automatically shut off after 30 seconds of in-activity. To change this time, please proceed to section “Display”.
Notifications
Notifications will appear on the screen when turning on the screen, alerting you to any potential changes to your device and/or applications.
You can interact with these notifications from here by tapping on them twice.
To clear a notification, hold one finger on the notification, and slide right.
When the device is unlocked, you can access your notifications within the Notification and Quick Access Panel. Please see the above-mentioned section for instructions.

Applications

Your Aspera R10 will come with many applications installed, many of them critical for the functionality of the phone. We ask that you do not disable or uninstall them, as they may be critical for the device to perform as expected.
If you wish to uninstall and/or disable certain applications, please contact our customer support to see whether they are integral to the functionality of your device.
To install applications:
You will need to use the Play Store to install additional applications. You can find instructions in the section titled “Installing and Updating Applications” below.
To delete applications you have installed:
Unlock the phone and open the Applications menu.
Tap and hold with one finger over the application you wish to delete. Extra options will appear.
Keep holding this finger on the application and drag it near the top of the screen. An option called “Uninstall” will appear near the top right-hand side of the screen.
Drag the application into the “Uninstall” space and lift your finger off the screen.
A prompt will appear and ask if you wish to uninstall the application selected. To proceed, tap the “OK” option.
Application Shortcuts
You may find you use certain applications more than others and would like to access them directly from the Home Screen. To do this: Unlock the phone and open the Applications menu.
Find the application you wish to create a shortcut for. Tap and hold one finger on the application. Extra options will appear.
While you are still holding the application, move your finger, and the screen will change, allowing you to place the application shortcut on a respective position and page on the home screen.
Once you are happy with the position of your application shortcut, let go of your finger.
Note: You can create folders with applications shortcuts grouped in them. To do so, follow the instructions in the previous steps, and drag the application shortcut over another application. This will create a folder for future use.
To remove an application shortcut:
On the Home screen, find the application shortcut you wish to delete.
Tap and hold with one finger over this shortcut. Extra options will appear.
Keep holding this finger on the application and drag it near the top of the screen. An option called “Remove” will appear.
Drag the application shortcut into the “Remove” space and remove your finger from the screen. This will delete the application shortcut.
Calling and using the Phone Application
When on the Home screen, select the Phone application.
If you would like to call to a number that is not on your contact list: Select the keypad icon in the bottom right-hand corner of the screen.
Type the number you wish to dial with the keypad on the screen.  Tap the green telephone button to make a call.
If you would like to call a number that is on your contact list: Select the “Contacts” icon located in the bottom right-hand corner of the screen
Select the contact you wish to dial. Tap the “call” icon.
Answering a call
If the phone screen is off and locked, when a phone call comes in, a green icon will appear at the bottom of the screen.
To answer the incoming call, hold one finger to the green icon and swipe up. To reject the incoming call, hold one finger to the green icon and swipe down.
If the phone screen is on and unlocked, when a phone call comes in, two options will appear at the top of the screen.
To answer the incoming call, tap “Answer”.
To reject the incoming call, tap “Reject”.
Call Options
When you are on a call with someone, you will see a screen with multiple options on it.
Please note that the Aspera R10 has a proximity sensor. This means the screen will turn off when it senses your face is close to it, and the screen will turn on when it fails to detect the presence of a face.
You will have multiple options when inside a call.
Mute – Tap this to mute/unmute your microphone.
Keypad – Tap this to bring up a keypad. This is used in phone calls where you may need to dial a number, or enter in keys to proceed.
Speaker – Places the call into loudspeaker mode
Add Call – Add a call to make it a conference call
Hold – Puts/takes the call on/off hold.
Hang Up (Red Phone Icon) – Ends the voice call that is currently active.
Call History
On the Home screen, select the Phone application.
To look at recent calls both incoming and outgoing:
Tap on the “Recent” Icon located at the bottom of the screen.
To change between all calls received and calls missed:
Tap on the three dots located at the top right-hand corner of the screen.
Select “Call History”
You can switch between All Calls and Missed calls with the two tabs located at the top of the screen.
You can delete calls from both the call history as well as recent calls.
Tap and hold on the number/name in the call history you wish to delete. Extra options will appear after a short time, on which you can remove your finger. Use your finger to tap the “Delete” Option.
To delete all calls from your call history:
Follow the instructions in the “All calls received and missed” option to reach the All Calls and Missed Calls tab. Tap on the three dots located at the top right-hand corner of the screen. Select “Clear Call History”.
Caller ID
You can choose to show your contact number when calling out to different numbers. To change this setting: When on the Home screen, select the Phone application.
Tap the three dots located in the top right-hand corner of the screen and select “Settings”. Select “Calling Accounts”.
Select the SIM which you wish to make the changes. Select “Additional Settings”. Select “Caller ID”.
You can choose between Network default (whatever you have selected with your carrier), Hide Number (this will show as Private to whoever you call), and Show Number (this will show your number to whoever you call).
Blocking Numbers
If you do not wish to be contacted by certain numbers, you can block them from contacting you. Please note that they can still leave voicemails if this service is activated. To block a specific number:
When on the Home screen, select the Phone application. Select the “Recent” tab.
Find the number you wish to block. Tap and hold your finger over this number until additional options pop up.
A confirmation screen will appear asking if you wish to block this number. You will also have the option of reporting this call as a spam/nuisance call, if you wish to do so. Select “Block” to confirm these selections.
To unblock a specific number: When on the Home screen, select the Phone application. Select the “Recent” tab.
Find the number you wish to unblock. Tap and hold your finger over this number until additional options pop up.
Select “Unblock number”. Tap “Unblock” to confirm this.
If you cannot find the number in recent call history to either block or unblock: On the Home screen, select the Phone application.
Tap the three dots in the top right-hand corner and select Settings. Select “Blocked Numbers”.
From here, you can either Add a Number by tapping on this option or remove a blocked number by pressing the cross next to the number.
Contacts
Unlock the phone and open the Applications menu. Select the Contacts application.
In the bottom right-hand corner of the screen, tap the “Plus” Icon. This will bring up a screen with fields and forms to fill out.
You can select to save to your Google Account or to the Device. Input all relevant information for the contact you wish to save (Name, Email, Phone Number, etc.) Tap “SAVE” icon in the top right-hand corner of the screen.
If saving to the phone, you can also include a photo of the contact which will come up as a small icon in the Contacts application. To do this: On the page where you input information for the contact, tap on the camera icon near the top of the screen. You can select a pre-existing photo saved onto the phone or take a new photo with the camera of the phone.
Editing Contacts
Open the Applications menu, select the Contacts application, and tap on the name of the contact you wish to change.
Tap on the pencil icon located near the top right-hand corner of the screen.
You can now make changes to the relevant fields or change their picture by tapping on the camera icon if applicable (the contact will need to be saved onto the phone for you to change their picture).
Tap the “SAVE” icon located at the top right-hand corner of the screen to ensure all the changes are saved.
Messages
Unlock the phone and select the Message application.
To start a new text message, tap on the “Start Chat” button in the bottom right-hand corner of the screen.
You can either type in a contact name or number at the top of the screen, or you can select a contact by scrolling down on the screen and selecting the contact you wish to message.
Once the contact has been selected, you may begin typing in the “Text” box, then press the “SMS” icon located next to the message to send. Android organises messages into “threads”. This means that messages from a contact will all be listed together in a single thread, so it is easier to follow a conversation with a contact.
To read a thread:
Unlock the phone and select the Message application.
Threads are sorted by most recent activity and will have the contact name or number listed above the message.
Unread messages will appear as bolded text, while read messages will appear as normal text.
To enter a thread, tap on the contact name/message.
To read previous messages in a thread, you can scroll up by swiping your finger in a downwards motion. To go to the most recent message, you can scroll down by swiping your finger in an upwards motion.
To respond to the contact/number, tap the bottom where the Text box is located, and press the “SMS” icon located next to the message to send it.
To delete a thread:
Unlock the phone and select the Message application.
Tap on the thread you wish to delete.
Once in this thread, tap on the three dots located in the top right-hand corner of the screen. Select “Delete” and confirm that you wish to delete the conversation by tapping “Delete” again.
Display and Screen Options
On the Aspera R10, you can change the display brightness, wallpaper, when the screen turns off, orientation, and further settings to a configuration you prefer.
Brightness level determines how bright the screen is. To change this: Open the Applications Menu and select the Settings applications Select Display.
Select Brightness Level.
Once this option has been tapped, a bar will appear. You can hold your finger to this slider.
While holding the slider, move your finger left and right to change the brightness levels.
After you are happy with the brightness level, tap away from the bar, and it will return you to the previous screen.
Screen timeout determines the period of inactivity on the device before the screen is darkened and the phone is locked. To change this: Open the Applications Menu and select the Settings applications
Select Display
Tap on “Screen Timeout” Choose the period of time you are comfortable with.
Auto-rotate screen, Font size, and Display size are all under the Advanced tab.
Auto-rotate screen can be enabled so the phone calibrates and orientates the screen to a portrait or landscape format depending on how you hold the phone.
Font size and Display size change the size of what is displayed on your screen. You can adjust these to your personal preferences.
You can also change the brightness level and auto-rotate screen options in the Notification and Quick Settings Panel.
Ringtones and Volumes
There are multiple methods to change your ringtone and volume settings through the Aspera R10.
The first method is to go through the Settings application.
Open the Applications Menu and select the Settings applications Select Sound.
From here, you can change different volume options – media, call, ring, and alarm volume.
To change these, hold one finger on the button on the sliding bar, and move it in a left or right direction.
To reduce the volume, move the button to the left.
To increase the volume, move the button to the right. Let go of the button once you are happy with the value set. Android has four different volume controls.
Media volume is the volume in which videos, songs, and similar media play from your device.
Call volume is the volume you will hear when you are in a phone conversation.
Alarm volume is the volume your alarm will make when set off.
Ring volume is the volume your phone will make when you are receiving a call.
You can also choose whether your phone vibrates when receiving a call by switching on or off this option below the volume bars.
Underneath these settings, you will find “Do Not Disturb”. You can find more information about this feature in the section below.
“Shortcut to prevent ringing” is used to either place the phone on vibrate only, or completely muted by pressing the volume up and power key together for one second. This can be turned off or changed to your choosing.
You can access further volume settings by tapping into Advanced. This will allow changes to:
Notification ringtones
Alarm ringtones
Ability to change other sounds and vibrations (dial pad tones, touch sounds, vibrate on tap, etc.) The second method to quickly change your ringtone and associated volumes is to press the volume buttons on the right side of the phone when your phone is unlocked. To do so: Press the volume buttons.
This will briefly show a volume notification on the right side of the screen, with a sliding bar and music note icon below.
To change the setting, hold one finger on the button on the slider, and move it to the direction you choose. Sliding the button downwards decreases the volume while upwards increases the volume.
Once you are satisfied with level, release your finger from the screen.
Note: If you do not interact with this sound notification for a short while, it will disappear, and you will have to begin the process from the start again.
You can change the phone ringtone to one of your choosing by tapping on Phone Ringtone, and then selecting the ringtone you would like.
Wi-Fi
Open the Applications Menu and select the Settings applications.
Select Network & Internet, then select Wi-Fi. Ensure that it is turned on at the top, then it will automatically search for wireless networks around you.
The strength of the wireless network is indicated to the left of the network name. If the wireless network is secure and requires a password, a padlock icon will show to the right of the wireless network name.
To connect to a wireless network, tap on the network name. If it is a secure network, it may prompt you to enter a password, which you will need to do so before selecting connect.
Once you are connected, you will be able to see a wireless network indicator at the top right-hand corner of the screen, next to the battery and mobile network.
Cellular/Mobile Data
The Aspera R10 can use the 4G network to connect to cellular data. Please note that you will need a valid mobile data plan to access cellular data, and that data restrictions may apply depending on the phone plan. To use your cellular network for internet:
Open the Applications Menu and select the Settings applications.
Select Network & Internet Select Data Usage
Enable the option for Mobile Data.
Roaming
If your carrier supports it, your Aspera R10 can be used for roaming services. Please note that you will need a valid mobile data plan for roaming services, and there may be significant costs attached with a valid roaming service. Please check with your telephone service provider regarding these conditions.
To enable your phone for roaming:
Open the Applications Menu and select the Settings applications Select Network & Internet Select Mobile Network Enable the option for Roaming
Bluetooth
Open the Applications Menu and select the Settings applications Select Connected Devices, then select Bluetooth.
Ensure that Bluetooth is turned on so you can access more options.
You can connect a device by selecting “Pair New Device”.
Wait for the device to find the relevant Bluetooth device name, then tap on it. A prompt will ask if you would like to pair, and to confirm the pairing code.
Email Access and Setup
As the Aspera R10 is an Android-based operating system, it comes with Gmail as the default email application for the phone. This application can be used with different service providers, such as Google, Outlook, Hotmail, Live, Yahoo, Exchange, and Office 365. Open the Applications Menu
Select Gmail
If you have a different service provider, it is possible to setup your email Account with Gmail. You will need to contact your email service provider on how to setup the correct protocol (POP3, IMAP, or Exchange) to access your email through Gmail. Select the relevant service provider and follow the instructions on the screen to setup your Email for your Aspera R10.
Internet Access
As the Aspera R10 is an Android-based operating system, it comes with Chrome as the default internet browser application for the phone.
Unlock the phone and select the Chrome application.
You can opt to sign into a Google Account, which allows you to sync history, favorites, and other settings.
Alternatively, you can skip this step if you do not wish to sync your Google Account to the Chrome on your mobile device.
From the landing page, you can either search or access a website directly by typing it in.
To search for a website through Google, simply type in the search query and press the blue arrow button at the bottom right-hand side of the screen to proceed.
To access a website directly, you will need to enter the full URL before pressing the arrow button.
Installing and Updating Applications
Aspera R10 runs on Android . This means all applications that require updates will need to be done through the Google Play Store.
Open the Applications Menu and select the Play Store application.
When loading for the first time, you will need to sign in with a Google Account and allow the updating process to complete.
Once updated, you will be able to access the Play Store storefront.
To install an application:
Tap on the application name in the Play Store storefront. Alternatively, you can search for the application by typing it into the search bar at the top of the screen. Once you have tapped into the application page, tap install.
Note: Applications may have a cost or additional fees attached.
To update an application:
Tap the three horizontal lines in the top left-hand corner. Select “My Apps & Games”.
To update all your applications, select “Update All”. To update a particular application, scroll down and select “Update” next to the specific application.
“Do Not Disturb” Feature
Do Not Disturb is a feature present inside Android, which blocks all notification and ringtone noises except for alarms.
To turn on/off:
Go into the Settings application and select Sound.
Select Do Not Disturb
Scroll to the bottom of the screen and tap “Turn on Now” or “Turn off Now”
You can also enable and disable Do Not Disturb by accessing the Notification and Quick Settings Panel and tapping on the Do Not Disturb icon, located to the left of the flashlight.
Expandable Storage
The Aspera R10 comes with the ability to insert a micro-SD card up to the size of 256GB to expand the storage space on the device. This micro-SD card can be used in two different ways and will need configuration before it can be used.
When the micro-SD is first inserted, a notification will appear, asking you to tap it to setup. Tap this notification to transition to a screen on how you would like to use the SD card.
You can choose to either use the SD card as extra phone storage or as portable storage.
Electing to use the SD card as extra phone storage will format and delete everything off the storage card, and you will be able to use this storage space for applications and media files on this phone ONLY
Electing to use the SD card as portable storage will only allow the SD card to be used to move media files (photos, music, videos etc.) but will not requiring formatting and can be used over multiple devices.
Tap on the required selection, follow the prompts, and the SD card will be ready for use.
USB Tethering and Computer Connection
You can use the USB connection to transfer files and internet tether with the Aspera R10.
To transfer files to and from your Aspera R10:
Connect your Aspera R10 to a Windows-based computer with the USB cable.
Once connected, unlock your phone and access the Notification Panel.
Find the notification that states, “Android System – charging this device via USB”. Tap on this notification to enter an options page. You will find multiple options under here. Under “Use USB for”, choose “Files Transfer”.Your Aspera R10 storage can now be accessed by the computer, and you can move files between the two devices.
To use your Aspera R10 as a tethering hotspot via USB:
Connect your Aspera R10 to a Windows-based computer with the USB cable.
Go to the Settings application and select Network & Internet.
Select Hotspot & Tethering and enable USB tethering.
After establishing the connection, you can access the internet through your Aspera R10 data on your computer.
Application Functions
Camera and Gallery
The Aspera R10 comes with a rear facing and front facing camera which can be used to take photos and videos.
You can open the camera by tapping on the Camera application. Once inside, you can manipulate multiple settings by tapping the icon at top right of the display.

1. Opens to modes and further settings
2. Chooses Flash Modes
3. Switches between rear and front cameras
4. Taking a picture/video, depending which option is selected

To view photos and videos on your device:
Open up the Applications menu
Select Photos
This will bring you into a gallery of the images and/or videos that are saved onto your phone, whether they are downloaded or taken with the camera. To go into an image or video, simply tap once on the preview image.
To select multiple images or videos:
Hold one finger over a preview image in the gallery until the screen changes and a blue tick has appeared next to the image.
Once this blue tick has appeared, you can then tap on multiple images/videos to select them.
After selecting images/videos, you can choose to share them via certain communication methods (like email, messaging applications and more) by tapping on the icon shaped similar to a triangle in the top right-hand corner.
To exit out of this mode, simply press the cross shaped marker in the top left-hand corner.
Alternatively, after selecting multiple images/videos, you can choose to delete these files by tapping on the three dots located at the top right of the screen and selecting “Delete” then confirming by tapping “delete” again.
Note: This function will permanently delete these files from your mobile phone storage.
Maps and GPS/Location
The Aspera R10 has location-based services available to assist with navigation and other tasks. If you would like to disable or enable GPS/location services:
Go to the Settings application Select “Location”
You will see the “Use Location” button located at the top of the screen. To enable/disable it, tap the button.
The Aspera R10 comes with Chrome and Google, which can be used to help navigate and find local landmarks near you.
You can modify applications which do/do not have access to your mobile phones location by selecting “App permission” and manually selecting “Allow” or “Deny”.
For further instructions and troubleshooting regarding Google, please use Google’s documentation, which can be found here: https://support.google.com/websearch/answer/9384806?hl=en
Clock and Alarm
Open up the Applications menu and select Clock. The clock has multiple features, including alarms, timers, a world time, and a stopwatch.
To setup an alarm:
Inside the Clock application, select the Alarms icon in the top left-hand corner of the screen Press the Blue plus button at the bottom of the screen
Select the time you wish for the alarm to ring by moving the hands on the clock. You can change between hour and minutes by tapping on the hour and minute at the top.
You can change between AM and PM by tapping on the relevant option.
Select “OK” when you are happy with the set time.
To enable/disable an alarm:
Tap the button to the right of the alarm. Greyed out means it is disabled, Blue means it is enabled. To edit an alarm and additional settings:
Tap on the arrow located to the bottom right-hand side of where the alarm is, just underneath the button to enable and disable an alarm.
This will bring up additional settings, including whether to repeat an alarm for certain days, the alarm tone, and whether you would like for it to vibrate upon ringing.
You can also delete the alarm by tapping the delete button and icon located to the left of the arrow.
Calendar
The Aspera R10 uses the Google Calendar, which can synchronize events to your phone and computer if you have an applicable Account to use with them. You can also use the calendar offline. To access the calendar:
Open the Applications menu and select Calendar application
Pass through the information pages by pressing on the arrow key in the bottom right-hand side of the screen.
Once you have landed in the calendar, you can add events by tapping on the “plus” icon in the bottom-right hand corner. From here, you can fill in the required information.
You can scroll between the dates by swiping your finger vertically.
To view further information about information saved into the calendar on a date, simply tap once on the title of the entry. From here, you can view additional information, edit, or delete the event.
For further documentation and instructions on how to use Google Calendar, please use the resource linked below: https://support.google.com/calendar/?hl=en#topic=3417926
FM Radio
When using earphones through the headphone jack as an antenna, the Aspera R10 can connect to FM radio.
Open up the Application menu and select FM Radio. To scan for stations, tap on the three horizontal lines in the top right-hand corner of the screen to enter “Radio Stations”. From here, tap on the three dots, and select “Refresh”.
To change stations, tap on the three horizontal lines in the top right-hand corner of the screen to enter “Radio Stations”, then select the frequency you wish to tune into.
Audio
You can transfer music onto the Aspera R10 by connecting it to a computer and copying the files over into the Internal Shared Storage folder called “Audio” on the phone. For instructions on how to copy files over, please see section “USB Tethering and Computer Connection” above.
Once the music has been copied onto the phone, you can now access the music by using the YouTube Music application. YouTube Music is also used to subscribe to the YouTube Music listening platform, but this is completely optional. You can enjoy your own copied music without subscribing to YouTube Music.
Open the Applications menu and select YouTube Music.
If launching for the first time, an advertisement for the YouTube Music subscription will appear. To skip this advertisement, tap the “No thanks” in the bottom left-hand corner.
This will now take you to the YouTube Music application, where your copied music will appear.
Calculator
Open up the Applications menu and select “Calculator”.
You can change between Radians (RAD) and Degrees (DEG) by tapping on the initials in the top left-hand corner. For further formulae and calculations, tap the blue arrow located on the left-hand side of the screen.
Maintenance of your device
The Aspera R10 uses a lithium-polymer battery, where the capacity may diminish over a period of time. To ensure longevity of the battery lifespan: Attempt to only charge the phone when the battery life is nearly depleted if possible
Charge until the battery is full, then take it off the charger. We recommend to not let the phone charge overnight. Do not charge and use the phone at the same time, if possible. Depending on intensity and usage of the phone, the battery may deplete faster when the processor is being utilized more. Some examples of this include, but are not limited to:
Using the Phone application for calls
Utilizing mobile data and wireless internet for applications Running resource intensive games and applications Using location/GPS services
Multiple applications running in the background (can be closed through Task Manager) Applications updating in the background
We recommend to close applications in the background when not in use by using the Task Manager (square button on the device) to maintain stability of the system.
We also recommend rebooting your device once a week to refresh the phone to maintain performance and stability of the device.

Google, Android and Chrome are trademarks of Google LLC.
www.asperamobile.com

References

• Home - Aspera Mobile

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>