MAGICSHINE EVO 1700 Bike Headlight Beam User Manual

MAGICSHINE EVO 1700 Bike Headlight Beam

Product Information

• Product Name: EVO 1700
• App Pairing Name: M2-B0
• User Manual: EVO 1700 User Manual
• Warnings:
  1. To prevent inadvertent switching on, keep the light unit in lockout mode before transport or storage.
  2. DO NOT disassemble, modify, remanufacture, puncture, or damage the device or batteries.

Product Usage Instructions

In the Box

• EVO 1700 Handlebar
• MJ-6508 Remote
• Out-Front Mount Control (incl. strap)
• Nylon Shim (28mm/32mm/35mm)
• Screw
• USB-C Charging Cable
• 2mm/3mm Hex Key

Remote C

WARNIN Gontrol Instructions

1. Before first use, open the remote’s battery compartment, remove the insulating spacer, reinsert the battery, then cover the battery compartment. The indicator on the remote will flash blue.
2. The remote control will enter sleep mode if the light is turned off for more than 48 hours without any operation. Click the light’s button to activate it or long-press the light’s button to turn it on, and the remote control can work normally.

Remote Control Pairing

1. Turn on the light.
2. Press and hold the buttons on the remote for about 10 seconds until the indicator alternately flashes blue to enter pairing mode.
3. Put the remote close to the light button until the indicators on the remote and light unit are constantly blue for 2 seconds, confirming a successful pairing.

Remote Control Operation

• ON/OFF: Press and hold the button for 1 second.
• ADJUST BRIGHTNESS: Click the button.
• CHANGE MODE: Double click the button.
• FLASH MODE: Double click the button.
• FULL OUTPUT MODE (1700LM): Click the button to go into full output mode and click the / button to return to the previous mode.

Charging / Battery Indicator

• Standard charging time: approx. 5 hrs (5V 1A)
• Charging: Flashing red
• Fully charged: Constant green

Battery Indicator

• When the light is off, click the button to display the remaining battery level for 3 seconds.
• 100%-21%: Constant green
• 20%-11%: Constant red
• 10%-1%: Flashing red

Output / Runtime

Remote Control Mounting
Adhesive velcro hook side up

APP PAIRING NAME: M2-B0

EVO 1700

WARNING

1. To prevent inadvertent switching on, please keep the light unit in lockout mode before transport or storage.
2. DO NOT disassemble, modify, remanufacture, puncture, or damage the device or batteries.

IN THE BOX

OPERATING INSTRUCTIONS

HEADLIGHT BUTTON OPERATION:

• ON/OFF: Press and hold the button for 1 second
• ADJUST BRIGHTNESS: When the light is on, click the button to change brightness level. The output brightness will cycle through LOW→MEDIUM→HIGH.
• CHANGE MODE: Double click the button to change between low beam and high beam. (Note: The Day flash and Night flash can only be accessed through the remote control.)
• CHECK BATTERY LEVEL: Click the button
• LOCK/UNLOCK: When the light is off, press and hold the button for 3 seconds to enter lockout mode. To unlock the light, you can press and hold the button again for 3 seconds or charge the light.

REMOTE CONTROL INSTRUCTIONS

Note:

1. Before first use, please open the remote’s battery compartment, remove the insulating spacer, reinsert the battery, then cover the battery compartment, and the indicator on the remote will flash blue.
2. The remote control will enter sleep mode if the light is turned off for more than 48 hours without any operation. Click the light’s button to activate it or long-press the light’s button to turn it on, and the remote control can work normally.

REMOTE CONTROL PAIRING

Turn on the light, press and hold the “○””□” buttons on the remote for about 10 seconds until the indicator alternately flashes blue to enter pairing mode. Then, put the remote close to the light button until the indicators on the remote and light unit are constantly blue for 2 seconds, confirming a successful pairing.

REMOTE CONTROL OPERATION

ON/OFF: Press and hold the “○”/”□” button for 1 second ADJUST BRIGHTNESS: Click the “○” button
CHANGE MODE: Double click the “○” button
FLASH MODE: Double click the “□” button
FULL OUTPUT MODE (1700LM): Click the “□” button to go into full output mode and click the “○”/”□” button to return to the previous mode.

CHARGING / BATTERY INDICATOR

• Standard charging time approx.
• 5 hrs (5V 1A)
• Charging: Flashing red
• Fully charged: Constant green

BATTERY INDICATOR

When the light is off, click the button to display the remaining battery level for 3 seconds.

• 100%-21%: Constant green
• 20%-11%: Constant red
• 10%-1%: Flashing red

OUTPUT / RUNTIME

*All data are measured in accordance with ANSI/NEMA FL 1-2009. The test was conducted at a temperature of 25°C and a wind speed of 25 km/h. The runtime may vary depending on external temperature and ventilation conditions, and these deviations may affect the result of testing.

HOW TO INSTALL / REMOVE

1. INSTALL THE OUT-FRONT MOUNT
2. REMOVE THE OUT-FRONT MOUNT
3. REMOTE CONTROL MOUNTING
   Adhesive velcro hook side up

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>