AMANA GSH100903AA GSH 10 SEER Remote Heat Pumps User Manual

: June 13, 2024
: Amana

Table of Contents

AMANA GSH100903AA GSH 10 SEER Remote Heat Pumps
Important Information
Functional Parts
CONTROL COVER/CONTROL BOX
COMPRESSOR/TUBING ASSEMBLY
COIL/CABINET TOP/SIDE PANELS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AMANA GSH100903AA GSH 10 SEER Remote Heat Pumps

Product Information:

Product Name: GSH 10 SEER Remote Heat Pumps
Manufacturer: Goodman Manufacturing Company,L.P.
Model Nomenclature: M1 – GSH100903AA – M2 – GSH100903AB -M3 – GSH100904AA – M4 – GSH100904AB – M5 – GSH101203AA – M6 -GSH101203AB – M7 – GSH101204AA – M8 – GSH101204AB

Warranty: Warranty service must be performed by an authorized technician using authorized factory parts. Contact an authorized technician for service after the warranty expires. Functional
Parts: – 0130M00025S: 24V RELAY – CAP200000440RPS:
CAPACITOR 20/370V – ZR108KCTF5950: COMPRESSOR 10900, 200/230/60/3 (M5, M6) – ZR108KCTFD950: COMPRESSOR 10900, 460/60/3 (M7, M8) – ZR84KCTF5950: COMPRESSOR 85500, 200/230/60/3 (M1, M2) – ZR84KCTFD950: COMPRESSOR 85500, 460/60/3 (M3, M4) – 0131M00040S: COND MOTOR 1 HP, 1 SP, 230V (M1, M2, M5, M6) – 0131M00041S: COND MOTOR 1 HP, 1 SP, 460V (M3, M4, M7, M8) – CONT3P040024VS: CONTACTOR – B1243749: CRANKCASE HEATER 240V, 75 WATTS (M1, M2, M5, M6) – B1243732: CRANKCASE HEATER 460V, 75 WATTS (M3, M4, M7, M8) – B1360721: CUT-OUT SWITCH, HIGH PRESSURE – B1360719: CUT-OUT SWITCH, LOW PRESSURE – PCBDM101S: DEFROST CONTROL BOARD – B1370803: DEFROST THERMOSTAT – B1225022S: SOLENOID COIL – B1225020: SOLENOID COIL CORD W/1/4 TERMINAL – B1372801: SIGHT GLASS (M1, M2, M4, M6, M8)

Product Usage Instructions:

This product is intended for use by qualified technicians only. Do not attempt to repair or service the product if you are not qualified.
Before beginning any repairs, review all service information provided in the manual.
If the product is under warranty, warranty service must be performed by an authorized technician using authorized factory parts.
If service is required after the warranty expires, it is recommended to contact an authorized technician and use authorized factory parts.
Views shown in the manual are for parts illustrations only and not for servicing procedures.
The product manufacturer, Goodman Manufacturing Company, L.P., reserves the right to discontinue or change specifications or designs without notice.
For assistance within the U.S.A., contact the Consumer Affairs Department of Goodman Manufacturing Company, L.P.

at: – Address: 7401 Security Way Houston, Texas 77040 – Telephone: 877-254-4729 – Facsimile: 713-863-2382 8. For assistance outside the U.S.A., contact the International Division of Goodman Manufacturing Company, L.P. at: – Address: 7401 Security Way Houston, Texas 77040 – Telephone: 713-861-2500 – Facsimile: 713-863-2382 For more information and resources, visit the following websites: – www.goodmanmfg.com – www.amana- hac.com

Important Information

Text Codes:
AR – As Required
NA – Not Available
NS – Not Shown
00000000 – See Note
QTY – Quantity Example (QTY 3) (If Quantity not shown, Quantity = 1)
M – Model Example (M1) (If M Code not shown, then part is used on all Models)

Expanded Model Nomenclature:

Example

M1 – Model#1
M2 – Model#2
M3 – Model#3

Goodman Manufacturing Company, L.P. is not responsible for personal injury or property damage resulting from improper service. Review all service information before beginning repairs.
Warranty service must be performed by an authorized technician, using authorized factory parts. If service is required after the warranty expires, Goodman Manufacturing Company, L.P. also recommends contacting an authorized technician and using authorized factory parts.

Goodman Manufacturing Company, L.P. reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations.