BIG BOYS TOYS Dodge Ram 2500 Fender Flares Installation Guide
- June 13, 2024
- BIG BOYS TOYS
Table of Contents
BIG BOYS TOYS Dodge Ram 2500 Fender Flares
Product Information
RAM Fender Flares
The RAM Fender Flares are designed to enhance the appearance of your truck while providing protection against dirt, debris, and other road hazards. The installation kit includes a rubber trim kit, bolts, rivets, and an Allen key, ensuring a hassle-free installation process. Please note that additional modifications may be required for older trucks with rusted wheel wells.
Product Usage Instructions
- Prepare the Vehicle:
- Ensure that the surface is free of dirt and debris.
- If necessary, wash the truck or clean the surrounding areas around the wheel well.
- Install the Rubber Trim:
- Take the rubber trim provided and install it onto the top edge of all the flares.
- Take your time and be careful to ensure a perfect installation.
- Install Pocket/Rivet Bolts:
- To achieve a fierce appearance, install the provided bolts on all fender flares.
- Insert each bolt through its corresponding hole and use a washer to secure it.
- Tighten the bolts using the Allen key.
- Remove Factory Screws:
- Remove and save the screws that were originally installed by the factory.
- The remaining screws will be reused for installing the front flare.
- Fender Flares Installation:
- Hold the flare against the vehicle and begin re-installing the remaining factory screws using a socket.
- Do not tighten the screws completely yet.
- Apply firm pressure on the flare and tighten all the screws securely.
FENDER FLARES KIT
- Make sure that you have received a Fender flare installation kit with your purchase, which should include a rubber trim kit, bolts, rivets, and anAllen key.
PREPARE THE VEHICLE
- Ensure that the surface is free of dirt and debris.
- If it is not clean, please either wash the truck or clean the surrounding areas around the wheel well.
INSTALL THE RUBBER TRIM
- install the rubber trim provided onto the top edge of all the flares.
- Take your time and be careful while doing this to make sure it is done perfectly.
INSTALL POCKET
- To achieve a fierce appearance, install the provided bolts on all fender flares.
- Insert each bolt through its corresponding hole and use a washerto secure it. Then, tighten the bolt using an Allen key.
REMOVE FACTORY SCREWS
- Remove and save screws that were originally installed by the factory.
- The remaining screws will be reused for installing the front flare.
FENDER FLARES INSTALLATION
- Hold the flare against the vehicle and begin re-installing the remainingfactory screws using a socket.
- Do not tighten them completely yet.Apply firm pressure on the flare and tighten all the screws securely.
NOTE
- If your truck is old and the wheel well has rusted out, additional modifications may be necessary to successfully install the fender flares.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>