PHILIPS ES-L IS PS IR Light Bulb Instruction Manual
- June 13, 2024
- Philips
Table of Contents
MYCREATION
Grand
(Elegant/Robust/ Natural series)
ES-L IS PS IR Light Bulb
| | A Ø| B| C
---|---|---|---|---
ES-L IS PS| 2500| 400| 376| –
ES-L IS PT| 2400| –
ES-L PS| 2000| –
ES-L PT| 1900| –
ES-M IS PS| 1900| 300| 308| –
ES-M IS PT| 1800| –
ES-M PS| 1600| –
ES-M PT| 1500| –
| | A Ø| B| C
---|---|---|---|---
RS-L IS PS| 2400| 400| 376| –
RS-L IS PT| 2300| –
RS-L PS| 1900| –
RS-L PT| 1700| –
RS-M IS PS| 1800| 310| 308| –
RS-M IS PT| 1700| –
RS-M PS| 1500| –
RS-M PT| 1400| –
| | A Ø| B| C
---|---|---|---|---
NS-L IS PS| 2400| 365| 406| 436
NS-L IS PT| 2300| 436
NS-L PS| 1900| –
NS-L PT| 1700| –
NS-M IS PS| 2000| 261| 352| 372
NS-M IS PT| 1800| 372
NS-M PS| 1700| –
NS-M PT| 1500| –
Inrush current
Track
| 12S, 17S, 23S, 27S except FMT, 32S| 27S FMT, 37S, 39S, 42S| DIA / PSD| WIA
---|---|---|---|---
Electrical characteristics
Imax (A)| 0.75| 14.2| 18| 8.07
Tref (µs)| 190| 227| 2.8| 21
MCB| Luminaires max.
B-10 A| 30| 22| 17| 15
B-13 A| 39| 29| 29| 19
B-16 A| 49| 36| 36| 24
C-10 A| 51| 37| 37| 25
C-13 A| 66| 48| 36| 32
Canopy
| 12S, 17S ex. FMT, 23S,| 17S FMT, 27S ex. FMT 37S CRI80| 27S
FMT, 37S CR190 39S, 42S| 12S, 17S ex. FMT, 23S| 17S FMT, 23S, 27S
37S, 42S| WIA
---|---|---|---|---|---|---
Electrical characteristics
Imax (A)| 14| 14.5| 16.5| 18| 18| 4.9
Tref (µs)| 130| 150| 16.5| 250| 250| 56
MCB| Luminaires max.
B-10 A| 42| 35| 31| 21| 21| 15
B-13 A| 52| 43| 38| 27| 27| 19
B-16 A| 65| 54| 48| 34| 34| 24
C-10 A| 67| 56| 49| 35| 35| 25
C-13 A| 87| 73| 64| 57| 57| 40
Pendant Surrace
**
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control
conductors.
The control gear and/or the external flexible cable contained in this
luminaire shall only be replaced by the manufacturer or his service agent or a
similar qualified person. The light source contained in this luminaire is not
replaceable, in case of damage replace the luminaire.
Storage, installation, use, operation and maintenance of the products needs to
be performed exactly according the instructions in this manual and/or other
instructions as may be provided by us to guarantee safe use of the product
over its entire lifetime. Failure to adhere to these instructions will
invalidate your entitlement to warranty. Bolts with indication of torque
strength on the drawing need to be tightened using a calibrated torque wrench.
Pre-assembled bolts need to be retightened again to the required torque
specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or
label.
Disposal of the product.
** This product is made of high quality materials and components that can be
recycled and reused. If a product is marked with the crossed-out circular
garbage can symbol shown here, it means that it is subject to the European
Directive 2012/19/EU. You should check the information about local facilities
collecting used electrical and electronic products and their packaging on your
own. Local regulations prohibiting the discarding of equipment and packaging
together with municipal waste must be strictly observed. Proper disposal of
used packaging and product will help to avoid potential harmful eff ects on the
environment and human health.
4422 948 61762
2023-05-16