AMPTO SSGL-85.212.0P446-A Sandwich Grill Instruction Manual

: June 13, 2024
: AMPTO

Table of Contents

AMPTO SSGL-85.212.0P446-A Sandwich Grill
Product Information
Product Usage Instructions
SAFETY
OPERATION
CLEANING PROCEDURE
Description
Technical Data
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AMPTO SSGL-85.212.0P446-A Sandwich Grill

$AMPTO-SSGL-85-212-0P446-A-Sandwich-Grill-fig- $2$$

Product Information

The Sandwich Grill (Model: SSGL-85.212.0P446-A) is a gas-powered appliance designed for grilling sandwiches. It features a burner, regulator, heating plates, lid, body plate, and various screws and nuts for assembly. The appliance has a power output of 15,000 BTU/h and consumes 370g of gas per hour. It weighs 24kg (53lbs) and has dimensions of 45cm (17.8in) width, 30cm (11.9in) height, and 62cm (24.5in) depth.

Product Usage Instructions

Before operating the Sandwich Grill, please read the following instructions carefully:

Safety

Install the appliance in a well-ventilated area to eliminate combustion gases.
Leave at least 6 inches (15 cm) of free space around the equipment for proper ventilation.
Do not install the equipment next to combustible materials.
Ensure that the installation complies with safety standards.

Operation

Always ensure that the gas taps are in the off position before cleaning or performing any maintenance.
While the unit is still hot, scrape off as much grease and residues from the cooking surface as possible.
After the appliance has cooled down, clean the cooking surface and body using a damp cloth. Do not use a water jet or immerse the appliance in water.
Wipe off the appliance with a dry cloth and wait at least half an hour before starting operation again.

Please note that the pictures and drawings in the manual are for illustration purposes only, and all data is subject to change without prior notification.
SANDWICH GRILL – MODEL: SSGL-85.212.0P446-A
Please read these instructions carefully before operating this appliance.

SAFETY

Install your equipment in area well ventilated, to eliminate the gases generated by the combustion.
It’s recommended to leave at least 6 inches (15 cm) of free space around the equipment.
DO NOT install the equipment next to combustible materials.
The installation has to comply to the safety standards.

OPERATION

The equipment is supplied with a Gas Tap which can adjust the ﬂame (turn 1/4 to maximum ﬂame and turn 1/2 to minimum ﬂame).
Incorporated to the Tap there is a safety device that will let open the gas only if it is pressed and turned counterclockwise.
Before using the appliance for the ﬁrst time, remove the protection coating with a damp cloth, light the burner and allow the griddle to heat for +/- 30 minutes. You will notice some smoke appearing due to the protection coating burning, which is normal.
After 30 minutes of heating, adjust the gas tap to the operating desired temperature and grease the plate, generously with butter or oil. Never allow excess of fat or oil to build up as this will result in a build-up of carbon on the plates, which should be removed with a scraper.
The appliance is provided with a grease drawer that receives grease and food-scraped residues.
This appliance should be preheated before daily operation. Always allow 15 minutes of preheat time before loading the griddle with food to give the griddle surface time to saturate.
To turn off your appliance turn the gas tap knob completely clockwise.

CLEANING PROCEDURE

Always ensure that the gas taps are in off position before cleaning.
Try to scrape as much grease and residues from the cooking surface as possible while the unit is still hot.
After the appliance has cooled, clean the cooking surface and body using only a damp cloth. Never use water jet or immerse the appliance in water.
Wipe off the appliance with a dry cloth and wait at least half an hour before starting the operation again.

The pictures/drawings are illustrations. All data can be changed without notiﬁcation.