dyson HP10-OUG Purifier Hot and Cool Gen1 Machine User Manual

dyson HP10-OUG Purifier Hot and Cool Gen1 Machine

Product Information

The Dyson Purifier Hot+Cool Gen1 fan heater is equipped with an amplifier loop and a mesh filter cover. It features a screen below the loop amplifier and an outer cover release button on the side. The product is supplied with a combined glass HEPA+Carbon filter for air purification.

Product Usage Instructions

1. Assembling your machine:
   • Use both hands to lift the machine out of the box by its base. Do not lift it out by the loop amplifier.
2. Getting started:
   • Place the remote control on top of the machine with the buttons facing down.
   • Plug in and switch on the machine.
3. Power and continuous monitoring:
   • To stop the machine, press the Standby on/off button on the machine or the remote control.
   • Continuous monitoring is turned off by default. To turn it on, press and hold the Auto mode button on the remote control for 5 seconds. The LCD screen will indicate when continuous monitoring is on or off.
   • Continuous monitoring gathers air quality and temperature information, which is displayed on the LCD screen.
4. Information menu:
   • Press the Information menu button to scroll through the monitored information, including air quality, temperature, and filter levels. The LCD screen will display the relevant information.
   • If a particular pollutant causes a decrease in air quality, the LCD screen will show a symbol for that pollutant.

Information displayed on the LCD screen:

size,
suspended in the air we breathe. These include dust, mold, and
pollen.
Particulate matter (PM2.5)| Microscopic particles up to 2.5 microns in size, suspended in
the air we breathe. These include smoke, bacteria, and
allergens.
Indoor temperature| Ambient temperature monitoring to help maintain a comfortable
environment.

The Dyson Purifier Hot plus Cool Gen1 fan heater, with the amplifier loop and mesh filter cover, screen below the loop amplifier and outer cover release button on the side.

Assembling your machine

• Use both hands to lift your machine out of the box, by its base. Do not lift out by the loop amplifier.
• Dyson Purifier Hot+Cool Gen1
• Supplied with a combined glass HEPA+Carbon filter.

Getting started

• Place the remote control on top of the machine with the buttons facing down.
• Plug in and switch on.
• An image of the air purifier fan heater with the remote placed on the top of the loop amplifier and the location of the standby on/off button on the top of the base of the machine.
• The layout of the remote control with the standby button on the top left, the airflow speed toggle button in the middle left with the Auto mode button below and then at the bottom is the Oscillation button. On the top right-hand side is the Information menu button, then going downwards is the Heating control button, Cooling mode button and then Night mode button at the bottom.

Power and continuous monitoring

Stand-by on/off
Press the Standby on/off button on your Dyson purifying fan heater or remote control to stop your machine. It will continue to monitor the air quality.

Continuous monitoring

• Continuous monitoring is turned off by default. Once turned on, it will always be active until you turn it off again.
• With continuous monitoring turned on, your Dyson purifying fan heater will gather air quality and temperature information, which is displayed on the LCD screen.

Continuous monitoring
Press and hold the Auto mode button on the remote control for 5 seconds to turn it on. The LCD screen will indicate when continuous monitoring is on or off.

Information menu

• Press this button to scroll through the information being monitored by your Dyson purifying fan heater.
• Information about air quality, temperature and filter levels is shown on the LCD screen.
• When a particular type of pollutant causes air quality to decrease, a symbol for the pollutant will show on the LCD screen.

1. Indoor particulate matter – 12 seconds Monitors the current particulate matter with a graph showing the last 12 seconds of data.
2. Particulate matter (PM10) Larger microscopic particles up to 10 microns in size, suspended in the air we breathe. These include dust, mould and pollen.
3. Particulate matter (PM2.5) Microscopic particles up to 2.5 microns in size, suspended in the air we breathe. These include smoke, bacteria and allergens.
4. Indoor temperature Monitor the ambient temperature to help maintain a comfortable environment.
5. Filters The remaining filter life is shown on the LCD screen and will indicate when your filters need replacing.

Auto mode

• Set your Dyson purifying fan heater to Auto mode and the on-board sensors will intelligently adjust the settings of the machine according to the air quality.
• Air quality: your machine will pause when the target air quality has been reached, switching on again when the air quality levels drop.
• Airflow speed: the airflow speed will increase until the target air quality and temperature have been reached.

Airflow speed

Press the Airflow speed button to increase and decrease the airflow speed.

Oscillation

Press the Oscillation button to circulate the air around the room and scroll through the oscillation settings from 0° to 350°.

Night mode and Sleep timer

• In Night mode, your Dyson purifying fan heater will continue to monitor and respond to changes, but only using its quietest settings – and with its LCD screen dimmed.
• Press the Night mode and Sleep timer button to scroll through the timer options.

Heating and Cooling modes

• Press the button to set the required room temperature.
• Your machine will pause when the temperature set has been reached.
• Press the Cooling mode button to switch your machine from Heating mode to Cooling mode.

Changing your HEPA+Carbon filter

• Before changing your filter, switch off and unplug your Dyson purifier fan heater.
• The remaining filter life is displayed on the screen and will indicate when your non-washable filters need replacing. Press the Information button on your remote.
• You’ll need to reset the filter life on your machine.

Dyson Purifier Hot+Cool Gen1

Supplied with a HEPA+Carbon filter.

• To change your HEPA+Carbon filter, push down on the buttons either side of your machine to release the outer cover. Push down on the tabs to remove the filter.
• Push the replacement filter into the outer cover and make sure the tabs click into place.
• Put the outer covers into position on your machine and push firmly until they both click securely into position.
• Plug in and switch your machine, and reset your filter life

Resetting your HEPA+Carbon filter life

• It’s important to reset your filter life after you have replaced your filter.

Resetting your HEPA+ Carbon filter life

• Press and hold the Night mode button on your remote control.
• The display on your machine will countdown from five, the filter life will be reset and your machine is ready to use.

Looking after your machine

To always get the best performance from your Dyson purifying fan heater, it’s important to regularly clean it and check for blockages.

Cleaning your machine

• If your machine is dusty, wipe with a damp lint-free cloth.
• Look for blockages in the air inlet holes on the filter and the small aperture inside the loop amplifier.
• Use a soft brush to remove dust and debris.
• Don’t use detergents or polishes to clean your machine.

Error codes

If your machine shows an error code, try turning it off and then on again. If this doesn’t clear the error code contact Dyson Customer Care.
For more information and support for your machine go online: www.dyson.com/support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>