Wiremold AL241S-HB Lab Bench Work Surface Portal User Guide

June 13, 2024
WIREMOLD

AL241S-HB
Bench/Table Top Work Surface Portal

Wiremold AL241S-HB Lab Bench Work Surface Portal

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 1 003 194R2 ­ Updated October 2011
Legrand/Wiremold electrical systems conform to and should be properly grounded in compliance with requirements of the current National Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire hazard if improperly installed or used. Legrand/Wiremold electrical products may bear the mark as UL Listed and/or Classified and should be installed in conformance with current local and/or the National Electrical Code.
IMPORTANT: Please read all instructions before beginning.

Step 1
Determine configuration of receptacles in box and install short or long barrier as required (receptacles must be installed in the compartment containing the ground screw).
Wiremold AL241S-HB Lab Bench Work Surface Portal - step
1 Step 2
Remove appropriate knockouts in power and communications compartments, then cut holes to correspond with these in the furniture surface on which the box will be mounted (holes must be large enough to accommodate conduit fitting being used). Pull 1/2″ or 3/4″ trade size flexible conduit through furniture surface and attach to base with conduit fitting. Attach base to furniture surface using appropriate fasteners. Wire receptacles according to NEC and local codes.
Wiremold AL241S-HB Lab Bench Work Surface Portal - step
2 NOTE: Use long partition when receptacles are to be mounted adjacent to each other. Use short partition when receptacles are to be mounted back-to-back.
Step 3
Attach receptacles to base and attach faceplates using #6-32×1/2″ screws provided in hardware bag.
Wiremold AL241S-HB Lab Bench Work Surface Portal - step
3 Step 4
Attach cover to box using #8-32×5/16″ screws provided in hardware bag.
Wiremold AL241S-HB Lab Bench Work Surface Portal - step
4

© Copyright 2011 Legrand All Rights Reserved
Wiremold U.S. and International: 60 Woodlawn Street
West Hartford, CT 06110 1-800-621-0049
FAX 860-232-2062
Outside U.S.: 860-233-6251
Canada: 570 Applewood Crescent
Vaughan, Ontario L4K 4B4 1-800-723-5175
FAX 905-738-9721
1 003 194R2 1011

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WIREMOLD User Manuals

Related Manuals