GEBERIT IDO Reflect Plus Mirror Cabinet Instruction Manual
- June 13, 2024
- GEBERIT
Table of Contents
GEBERIT IDO Reflect Plus Mirror Cabinet
Product Information
This is the installation manual for the product. It provides important information and instructions for setting up and installing the product safely. The manual includes warnings about potential dangers and advises on the precautions that should be taken during installation.
Warnings:
- Before connecting the cables, disconnect the power supply to avoid electric shock.
- Only trained electrically skilled persons are allowed to set up the electrical connection.
- Incorrect installation can lead to death or serious injuries.
- If the product falls from a height, it can cause serious injuries. Check the wall’s bearing capacity before installation.
Contact Information:
If you have any questions or need further assistance, you can contact Geberit
International AG at:
Schachenstrasse 77, CH-8645 Jona
Email: documentation@geberit.com
Website: www.geberit.com
Product Usage Instructions
Follow these instructions to properly use the product:
- Ensure that the power supply is disconnected before connecting any cables.
- If you are not a trained electrician, do not attempt to set up the electrical connection. Seek professional assistance.
- Only install the product within defined protective areas and take appropriate safety measures.
- Check the wall’s bearing capacity before installing the product. Make sure the wall is suitable for installation.
- If necessary, replace the supplied fastening material with suitable material for the type of wall being used.
For any further instructions or specific usage guidelines, refer to the product’s user manual or contact Geberit International AG for assistance.
WARNING
DANGER
-
Electric shock
Incorrect installation can lead to death or serious injuries.- Only trained electrically skilled persons are permitted to set up the electrical connection.
- Disconnect the power supply before connecting the cables.
- Only carry out the installation within the defined protective areas and take the appropriate safety measures.
-
Incorrect installation
If the product falls from a height it can lead to serious injuries.- Check the bearing capacity of the wall before installation.
- Before installation, check whether the supplied fastening material is suitable for the type of wall in question. If necessary, replace the fastening material.
DIMENSION
INSTALLATION
Geberit International AG
Schachenstrasse 77, CH-8645 Jona
documentation@geberit.com
www.geberit.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>