ASUS VZ24E Series LCD Monitor User Guide

ASUS VZ24E Series LCD Monitor

TCO Certifed

A third-party certification according to ISO 14024

Say hello to a more sustainable product
IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality, and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria of TCO Certified, the world’s most comprehensive sustainability certification for IT products. Thank you for making a responsible product choice, that helps drive progress towards a more sustainable future! Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility, or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. Last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly.

Want to know more?

• Read information about TCO Certified, full criteria documents, news, and updates at tcocertified.com. On the website, you’ll also find our Product
• Finder, which presents a complete, searchable listing of certified products.

Notices
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

As an Energy Star® Partner, our company has determined that this product meets the Energy Star® guidelines for energy efficiency. This product qualifies for ENERGY STAR in the factory default settings which can be restored by “Factory Reset” function in the OSD menu.  Changing the factory default settings or enabling other features may increase power consumption that could exceed the ENERGY STAR specified limit.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES 003. Made in China If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. Disposal of Waste Equipment by Users in Private Households in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product Please use ADP-40KD BB of DELTA adapter(VZ24E).

Safety information

• Before setting up the monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazards, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
• Use the appropriate power plug that complies with your local power standard.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL-listed computers that have appropriate configured receptacles marked between 100 ~ 240V AC.
• The socket outlet shall be installed near the equipment and shall be easily accessible
• If you encounter technical problems with the monitor, contact a qualified servicer.
• Provide an earthing connection before the mains plug is connected to the mains. And, when disconnecting the earthing connection, be sure to disconnect after pulling out the mains plug from the mains.

WARNING
Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures.

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner  intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

• WARNING: Information to prevent injury to yourself when trying to complete a task.
• CAUTION: Information to prevent damage to the components when trying to complete a task.
• IMPORTANT: Information that you MUST follow to complete a task.
• NOTE: Tips and additional information to aid in completing a task.

Where to find more information
Refer to the following sources for additional information and for product and software updates.

1. ASUS websites
   The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com.

2. Optional documentation
   Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm. for detail recycling information in different regions. Product information for EU energy label

Welcome!
Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you!

Package contents

Check your package for the following items:

• LCD Monitor
• Monitor Base
• Quick Start Guide
• Warranty Card
• 1x Power Cord
• 1x VGA Cable (option)
• 1x HDMI Cable (option)
• If any of the above items is damaged or missing, contact your retailer immediately.
• Also the Replaceable parts required by the TCO Certified.

Assembling the monitor

To assemble the monitor:

1. Place the display flat on a cloth on the table, Then attach the base to the arm and fix with the screw to join them tightly. You can easily tighten the screw by fingers.
2. Adjust the monitor to the angle that is most comfortable for you.

Connect cables

Rear of the LCD monitor

1. HDMI Port
2. VGA Port
3. Earphone – out Port
4. DC-IN Port
5. Kensington Lock

Six sides figure UNIT: mm(inch)

Monitor introduction

Using the Controls button
Use the control button on the back of the monitor to adjust the image settings.

1. Menu Button:
   • Press this button to turn the monitor on when monitor is power off.
   • Press this button enter the OSD menu when monitor is power on.
   • Enter/select the icon (function) highlighted while the OSD is activated.
2. Input Select Item / Increase value:
   • Add or Increase value
   • Input source select hot key
3. Brightness Item / Decrease value:
   • Next Item or Decrease value
   • Brightness hot key
4. Close / Return Button:
   • Return to previous menu.
   • Exit the OSD menu.
5. Power Button:
   • To activate “Power Off” OSD when monitor is power on.

Adjusting the monitor

• For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from +23˚ to -5˚

It is normal that the monitor slightly shakes while you adjust the viewing angle.

OSD (On-Screen Display) menu How to reconfigure

1. Press the MENU button to activate the OSD menu.
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu press the Center key.
4. Press the and buttons to select the desired parameter.
5. Press the Center key to enter the slide bar and then use the or  buttons, according to the indicators on the menu, to make your changes.
6. Press the ◄/► to move left / right menu.

OSD Function Introduction

1. Splendid
   This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.

   • Standard Mode: This is the best choice for document editing with SPLENDID™ Video Intelligence Technology.
   • sRGB Mode: This is the best choice for viewing photos and graphics from PCs.
   • Scenery Mode: This is the best choice for scenery photo displaying with SPLENDID™ Video Intelligence Technology.
   • Theater Mode: This is the best choice for movie watching with SPLENDID™ Video Intelligence Technology.
   • Game Mode: This is the best choice for game playing with SPLENDID™ Video Intelligence Technology.
   • Night View Mode: This is the best choice for playing dark-scene game or watching dark-scene movie with SPLENDID™ Video Intelligence Technology.
   • Reading Mode: This is the best choice for book reading.
   • Darkroom Mode: This is the best choice for a weak ambient light environment.
   • In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCRfunctions are not user-configurable.
   • In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness, Contrast and ASCR functions are not user-configurable.
   • In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast, and Color Temp functions are not user-configurable.

2. Eye Care
   In this function, you can adjust settings to better protect your eyes.

   • Blue Light Filter: In this function, you can adjust the blue light filter from 0 to Max.
   • 0: No change.
   • Max: The higher the level, the less blue light is scattered. When blue light filter is activated, the default settings of Standard Mode will be automatically imported. Besides maximum level, the brightness is user-configurable. Maximum is the optimized setting. It is compliance with TUV low blue light certification*. The brightness function is not user configurable.
   • When color augmentation is in default value (50). Please refer to the following to alleviate eye strains:
   • Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.
   • To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away.
   • Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
   • High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light filter to reduce 70% (max.) hrmful blue light to avoiding CVS (Computer Vision Syndrome) when the user adjusts blue light filter bar to maximum level.
   • Rest Reminder: This function provides you a rest reminder according to how long you set for your working time. For example, if you set a 30-minute working time and there will be a pop up reminder appeared on the upper left corner of the monitor for 5 seconds when time is up. Press any key to make this reminder OSD disappear.
   • When this function is enabled, the following functions are not available: Splendid Demo Mode, GamePlus, QuickFit.
   • Color Augmentation: The adjusting range of color enhancement is from 0 to 100.
   • This function is not available when sRGB Mode is selected in the Splendid menu.
   • This function is not available when Reddish or Yellowish is selected in the Skin Tone menu.
   • EyeCheck: The EyeCheck function contains three patters: (1) Snellen Chart (2) Amslter Grid (3) Astigmastism.

3. Color
   Select the image color you like from this function.

   • Brightness: The adjusting range is from 0 to 100.
   • Contrast: The adjusting range is from 0 to 100.
   • Saturation: The adjusting range is from 0 to 100.
   • Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode.
   • Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish.
   • In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100.

4. Image
   You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR, Position (VGA only), Focus (VGA only), and Auto Adjust (VGA only), from this main function. Sharpness: Adjusts the picture sharpness. The adjusting range is from0 to 100.

   • Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.
   • Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, and “Overscan(Only For HDMI)”.
   • VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.
   • ASCR: Select ON or OFF to enable or disable the dynamic contrast ratio function.
   • Motion Sync: Check to decrease motion blur and minimize ghosting part when on-screen objects are fast-moving. It can only be turned on at 75Hz or above.
   • FreeSync: It can allow a FreeSync-supported graphics source to dynamically adjust display refresh rate based on typical content framerates for power efficient, virtually stutter and low-latency display updates.
   • Position: Adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100(Only available for VGA input).
   • Focus: Reduces Horizontal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 (Only available for VGA input).
   • Auto Adjust: Automatically adjust the image to its optimized position, clock, and phase. (Only available for VGA input.)
   • 4:3 is only available when the input source is in 4:3 format。OverScan is only available for the HDMI input source
   • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.
   • Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.

5. Input Select
   Select the input source from VGA, HDMI input signal.

6. System Setup
   Adjust the system configuration.

   • Splendid Demo Mode: Activate the demo mode for the Splendid function.

   • Volume: Adjusts the output volume level.

   • GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, the Aimpoint function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games.
     To active GamePlus:

   • Select ON to enter the GamePlus main menu.

   • Press and to select between Crosshair, Timer, FPS Counter, and Display Alignment functions.

   • Press Center key to confirm the function you choose. Press to go back. Press to go off, and exit.

   • QuickFit: contains three patterns: (1) Grid (2) Paper size (3) Photo size.

   1. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistentlook and feel.
   2. Paper size: Provides users to view their documents in real size on the screen.
   3. Photo size: Provides photographers and other users toaccurately view and edit their photos in real size on the screen.
   • ECO Mode: Activate the ecology mode for power saving.
   • OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen.
   • Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, , Russian, Poland, Czech, Croacia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, Indonesian.
   • More: Return the next page of System Setting.
   • Back: Return the previous page of System Setting.
   • Key Lock: Disable all key functions. Pressing the second button on the right for more than five seconds to disable key lock function.
   • Information: Displays the monitor information.
   • Power Indicator: Turn the power LED indicator on/off.
   • Power Key Lock: To disable / enable power key
   • All Reset: Selects “Yes” to revert all settings to the factory default mode.

7. Shortcut
   Selecting this option allows you to set two shortcut keys.

   • Shortcut 1: User can select from “Blue Light Filter” “Splendid”, “Brightness”, “Auto Adjust”, “Contrast”, “Input Select”, “Color Temp.”, “Volume”, “QuickFit”, and “GamePlus”, and set as a shortcut key. The default setting is Brightness.
   • Shortcut 2: User can select from “Blue Light Filter” “Splendid”, “Brightness”, “Auto Adjust”, “Contrast”, “Input Select”, “Color Temp.”, “Volume”, “QuickFit”, and “GamePlus”, and set as a shortcut key. The default setting is Blue Light Filter.

Specifications

Phys. Dimension without stand (WxHxD)

(For VESA Wall Mount)

| ****

540 mmx 317 mmx 39 mm

Box Dimension (WxHxD)| 596 mmx488 mmx117 mm
Net Weight (Esti.)| 2.9 kg
Gross Weight (Esti.)| 4.2 Kg
Voltage Rating| DC 19V(Built-in)
Temperature| 0°C ~ +35°C
Humidity| 10% ~ 80%
Altitude| 12,000 feet (3,658 m)

Troubleshooting (FAQ)

the ON mode.

•    Check if the power cord is properly connected to the monitor and the power outlet.

•     Check Power Indicator function in main menu OSD.

Select “ON” to turn on power LED.

The power LED lights amber and there is no screen image| •    Check if the monitor and the computer are in the ON mode.

•    Make sure the signal cable is properly connected the monitor and the computer.

•    Inspect the signal cable and make sure none of the pins are bent.

•     Connect the computer with another available

monitor to check if the computer is properly working.

Screen image is too light or dark| •     Adjust the Contrast and Brightness settings via

OSD.

Screen image bounces or a wave pattern is present in the image| •    Make sure the signal cable is properly connected to the monitor and the computer.

•     Move electrical devices that may cause electrical

interference.

Screen image has color defects (white does not look white)| •    Inspect the signal cable and make sure that none of the pins are bent.

•     Perform Reset via OSD.

•    Adjust the R/G/B color settings or select the Color Temperature via OSD.

No sound or sound is low| •     Make sure the audio cable is properly connected to

the monitor.

•    Adjust the volume settings of both your monitor and computer.

•    Make sure the computer sound card driver is properly installed and activated.

•     Make sure the audio source is correct on the OSD.

Supported Timing List PC Supported Primary Timing

IBM Modes, Factory Preset Timing

MAC Modes, Factory Preset Timing

VESA Modes, User Available Timing

SD/HD Timings (HDMI input only)
HDMI 1.3,CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input only)

HDMI 1.3,CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input only)

The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables. Copyright © 2021 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

References

• Global Take Back Service | Resource Regeneration | Circular Economy | ASUS ESG website, ASUS ESG goal
• Manual-Hub.com - Free PDF manuals!
• TCO Certified - the world’s leading sustainability certification for IT products
• ASUS Global
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>