Paulmann 788.93 MaxLED 250 LED Strip Night Comfort Basic Set Instruction Manual

June 13, 2024
Paulmann

Paulmann 788.93 MaxLED 250 LED Strip Night Comfort Basic Set

Product Information

  • Product Model: 788.93
  • Product Type: PLIR
  • Manufacturing Date: 07/22
  • Energy Efficiency Rating: A++
  • Compliance Standards: 874/2012, 2019/2015
  • Manufacturer: Paulmann Licht GmbH
  • Manufacturer Address: Quezinger Feld 2, 31832 Springe, Germany
  • Website: www.paulmann.com

Product Usage Instructions

  1. Connect the 788.93 Driver12VA to the power source.
  2. Wait for 30 seconds.
  3. The product will operate for 6 minutes.
  4. If you have the 788.94 model, connect the Driver24VA to the power source.
  5. Wait for 30 seconds.
  6. The product will operate for 6 minutes.
  7. If you want to install multiple products, use 2x of the 788.94 model or 1x of the 788.93 model.
  8. For proper installation, refer to symbol B on the website: www.paulmann.com/symbols
  9. The product has a length of 167mm.
  10. For motion detection, set the product to mode A.
  11. The product will turn on for 30 seconds when motion is detected.
  12. After 30 seconds, it will automatically turn off.
  13. For continuous operation, set the product to mode F.
  14. The product will turn on for 6 minutes and then turn off.
  15. For energy-saving mode, set the product to mode G.
  16. If the light level is below 7Lux, the product will turn on for 30 seconds when motion is detected.
  17. If no motion is detected for more than 6 minutes, the product will turn off.
  18. Refer to symbols (1), (2), (3), (4), (5), and (6) on the website for additional information: www.paulmann.com/symbols

Paulmann Licht GmbH
Quezinger Feld 2
31832 Springe
Germany
www.paulmann.com

Paulmann-788 \(1\)

Hardware

Paulmann-788 \(2\)

Assembly

Paulmann-788 \(3\) Paulmann-788
\(5\) Paulmann-788 \(7\) Paulmann-788
\(8\) Paulmann-788 \(9\)

www.paulmann.com/symbols

Replaceability: (1) Light source or (4) operating device can be replaced by end users without permanent damage to the luminaire. (2) Light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire. (3) Light source or (6) operating device is not replaceable, the luminaire must be replaced.

This product contains a light source with energy efficiency class .

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals