Sleepy Sloth PNCP100 Sound Soothing Crib Projector User Guide
- June 13, 2024
- Sleepy Sloth
Table of Contents
Sleepy Sloth PNCP100 Sound Soothing Crib Projector
Product Information
The Sleepy Sloth Sound Soothing Crib Projector is a versatile device designed to provide soothing sounds, a projector, and a gentle nightlight for your little one’s bedtime. It comes with a built-in stand for easy positioning on a tabletop or flat surface, and it can also be securely mounted to a crib using the straps on the back. The Sleepy Sloth requires 3 AA batteries (not included) for operation.
Install Batteries
- Use a flathead screwdriver to open the battery door on the back of the Sleepy Sloth.
- Insert 3 AA batteries (not included).
- Put the battery door back in place and screw it shut.
IMPORTANT
The Sleepy Sloth comes with a dome cap you can use when you don’t want to
project on the wall or ceiling. If you do want to project remove the cap.
Position the Sloth
The Sleepy Sloth comes with a built-in stand, pre-installed for easy positioning on a tabletop or other flat surface. You can also mount the Sloth securely to a crib using the straps on the back.
To mount the Sloth to a crib:
-
Remove the Sloth’s stand by pulling it gently off the bottom of the Sloth.
-
Unfasten the straps on the back of the Sloth.
-
Place the Sloth on the top rail of the crib. Wrap the straps around the crib rail and fasten them so that the Sloth remains securely in place.
If you’re mounting to a crib: Make sure the Sloth’s dome cap is removed.
Everyday Use
The Sleepy Sloth offers soothing sounds, a projector, and a gentle nightlight for your little one’s bedtime.
To turn on the NIGHTLIGHT : Press the button. Press again to change the intensity of the nightlight (low, medium, high, and off). Press and hold the button to turn off all sounds and lights.
To turn on SOOTHING SOUNDS: Press the button. Press repeatedly to cycle through the different sounds (the final press turns soothing sounds off). Press the button to toggle through the volume settings (low, medium, and high). Press and hold the button to turn off all sounds and lights.
To turn on the PROJECTOR: Press the button. Press repeatedly
to cycle through the projector color options, including a multi-color mode
(the final press turns the projector off). Press and hold
the button to turn off all sounds and lights.
USING THE TIMER
The built-in timer automatically turns off the projector and soothing sounds at the end of the period you set (15, 30, or 60 minutes).
To turn the TIMER on: Press the button. The indicator
lights on top of the sloth show you the length of the current timer.
USING THE BUMP SENSOR
The Sloth’s belly has a bump sensor that baby can use to turn on the belly light, sound, and/or projector all by herself. By default, the bump sensor is off.
To turn the BUMP SENSOR on: Press and hold the button until
the sloth beeps once.
To turn the BUMP SENSOR off : Press and hold the button until the sloth beeps twice.
NOTE: The bump sensor activates with the light, sound, and projector settings from the last time the Sleepy Sloth was turned on and stays on for 15 minutes unless turned off.