TONNY TS2 Audiophile 8 Inch Subwoofer with High Excursion Woofer User Guide

June 4, 2024
TONNY

TONNY TS2 Audiophile 8 Inch Subwoofer with High Excursion Woofer

TS2 Audiophile 8 Inch Subwoofer with High Excursion
Woofer

Important Safety Instructions

Caution-Label

| Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock.
Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
---|---
| This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
| This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
| Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to qualified personnel.
| Caution
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
| Caution
These service instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

  1. Read these instructions.

  2. Keep these instructions.

  3. Heed all warnings.

  4. Follow all instructions.

  5. Do not use this apparatus near water.

  6. Clean only with dry cloth.

  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

  11. Use only attachments/accessories specified by the manufacturer.

  12. Cart-Carry-SymbolUse only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

  13. Unplug this apparatus during lightning storms or when unused for long periods of time.

  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

  15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

  16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

  17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources.
    For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

  18. Do not install in a confined space, such as a book case or similar unit.

  19. Do not place naked flame sources, such as lighted candles, on the apparatus.

  20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.

  21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

Introduction

Once you have set up your new subwoofers as described in this manual, please complete and return the registration document or register your product online at www.tannoy.com – this does not limit your legal rights.

Unpacking

Check carefully for any sign of transit damage. In the unlikely event of transit damage, notify your shipping company and/ or dealer as soon as possible for advice.
It is recommended you store all packaging to allow protected transport in future.

Caution

These monitors are capable of generating high sound levels over a sustained period of time.
Because of their low levels of distortion, it is not always obvious that the sound level is high when working with these monitors. Please be aware that exposure to excessive levels over a sustained period of time can lead to permanent hearing damage.

TS2 SUBWOOFER TS2.8 BO/WA/LO Controls

TS2 SUBWOOFER TS2.8 BO/WA/LO Controls

Controls
  1. VOLUME knob adjusts the overall audio level.
  2. FREQUENCY knob adjusts the frequency threshold where the subwoofer splits the low frequencies for subwoofer amplification from the mid/high frequencies that will be sent out via the OUTPUTS jacks for amplification by satellite speakers.
  3. MODE LED lights to indicate the subwoofer’s operational state (green = on; red = standby).
  4. MODE switch activates a special power mode that will shut down the speaker when audio has not been played for a while. When audio resumes, the speaker will power back on to resume operation.
  5. PHASE switch flips the subwoofer’s audio polarity to help solve phase problems.
  6. INPUTS jacks accept audio connections from balanced cables with XLR connectors.
  7. OUTPUTS section sends out a post-crossover signal consisting of mid/high frequencies over balanced cables with XLR connectors.
  8. POWER switch turns the speaker on or off.
  9. POWER SOURCE jack connects AC power using the included IEC power cable.

TS2 SUBWOOFER TS2.8 BO/WA/LO Operation

TS2 SUBWOOFER TS2.8 BO/WA/LO Operation

Operation

Setting up connections
These subwoofers are meant to be used with satellite speakers, usually in a stereo setup.
Here is an example hookup diagram showing a stereo signal from a mixing board going into the subwoofer’s INPUTS XLR jacks. A stereo output then runs from the OUTPUTS XLR jacks to the satellite speakers.

Specifications

System

Frequency response| 40 Hz – 170 Hz; ±3 dB
33 Hz – 240 Hz; -10 dB
Nominal dispersion| Half space
Maximum SPL| 110 dB
Crossover type| Active
Transducers| 1 x 8″ LF driver
1 x 8″ auxiliary bass radiator
Limiter| Peak and RMS
Amplifier
Maximum output power*| 200 W
Type| Class-D
Protection| Short circuit, thermal
Connectors
Inputs L / R| 2 x combo jack / XLR
Sensitivity with volume control at 0dB| -2 dBu
Input impedance| 18 kΩ unbalanced,23 kΩ balanced
Maximum input level| +22 dBu
Output L / R| 2 x combo jack / XLR
Mains Supply| IEC mains connector with integrated power switch
Controls / Indicators
Volume| Min to max, adjustable
Frequency| 50 – 150 Hz, adjustable
Mode switch| Auto / on, switchable
Mode LED| Green = on; red = standby
Phase| 0° / 180°, switchable
Power Supply
Type| Switch-mode power supply
Mains voltage| 100-120/220-240 V~, 50/60 Hz
Power consumption| 90 W @ 1/8 max power
Enclosure
Dimensions HWD| 320 x 325 x 275 mm (12.6 x 12.8 x 10.8″)
Net weight| 9.1 kg (20.0 lbs)
Construction| 18mm (7/10″) birch MDF
Finish| Black oak / walnut / light oak
Grille| Cloth

Other important information

  1. Register online. Please register your new MusicTribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.

  2. Malfunction. Should your MusicTribe Authorized Reseller not be located in your vicinity, you may contact the MusicTribe Authorized Fulfiller for your country listed under “Support” at musictribe.com.
    Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com.
    Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.

  3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model.
    Faulty fuses must be replaced with fuses of the same type and rating without exception.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.

Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

TONNY-Logo.png

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals