Benlydesign Z8000 X600 Metal Digital Watch Instruction Manual
- August 30, 2024
- Benlydesign
Table of Contents
Z8000 X600 Metal Digital Watch
“`html
Product Information
Specifications
-
Alarm function: Can set 1 group of alarm, ringing for 20
seconds -
Perpetual calendar function: Displays day of the week, month,
and day of the month -
EL backlighting
-
Stopwatch function: Up to 99 minutes and 59 seconds
Product Usage Instructions
Toggle Interface
In the non-setting state, short press S1 button to cycle
through: time interface – stopwatch interface – alarm
interface.
Time Screen
-
View weekday, month-day: Short press S2 button in the time
interface to display day of the week, then month-day. -
Setting time: Long press S2 button for 2 seconds to enter
12H/24H value setting. Short press S2 button to switch
sequentially: 12/24H hour – minute – day – month – year – exit
setting. Use S1 button to change the value.
Stopwatch Interface
To start the stopwatch, press S2 button. Press S2 button again
to pause and long press to clear. The stopwatch runs up to 99
minutes and 59 seconds.
Alarm Screen
-
Quickly turn on and off the alarm: Short press S2 button under
the alarm interface to toggle the alarm. -
Set the alarm: Long press S2 button for 2 seconds to enter hour
value setting. Short press S2 button to switch sequentially: hour –
minute – snooze (SLEEP) switch – exit setting. Use S1 button to
change the value. -
Alarm (clock): Alarm rings for 20 seconds, can be cancelled by
pressing any button. Snooze every 7 minutes for a total of 2
snoozes and 3 alarms when SLEEP is turned on.
Backlight
Each time you press the S2 button, the backlight will light up
for 2 seconds.
Frequently Asked Questions (FAQ)
Q: How do I set the alarm on the X600 Watch?
A: To set the alarm, long press the S2 button for 2 seconds to
enter the hour value setting. Use the S2 button to navigate through
hour, minute, and snooze settings. Press the S1 button to change
the values.
Q: How do I use the stopwatch function?
A: To start the stopwatch, press the S2 button. Press it again
to pause, and long press to clear. The stopwatch can run up to 99
minutes and 59 seconds.
“`
X600 Watch Operating Instructions
1. Alarm function: can set 1 group of alarm, ringing “DD”, ringing time for
20 seconds. 2. Perpetual calendar function: button switch display day of the
week – month and day of the month. 3. EL backlighting. 4. Stopwatch function:
up to 99 minutes and 59 seconds.
[S1] button: switch the function interface, change the setting value in the
setting state. [S2] button: every time you press the button to light up the
backlight, long press to enter the setting, short press to change the setting
item under the setting state.
1. Toggle interface In the non-setting state, short press S1 button to cycle
through: time interface – stopwatch interface – alarm interface.
2. Time screen (1) View weekday, month-day: In the time interface, short
press S2 button, light up the backlight for 2 seconds, then switch to display
day of the week, and switch to display month-day after one second.
(2) Setting time Long press S2 button for 2 seconds to enter 12H/24H value
setting, short press S2 button to switch sequentially: 12/24H hour – minute –
day – month – year – exit setting.
In the setting state, short press S1 button to change the value.
30 seconds without button operation, automatically save and exit the setting
state. 3. Stopwatch interface
Stopwatch screen, press S2 button to start the stopwatch. Running seconds
state, press the S2 button to pause the running seconds, at this time, long
press the S2 button to clear the stopwatch. Stopwatch runs to the maximum
value of 99 minutes and 59 seconds, the stopwatch stops, long press the S2
button stopwatch zero. 4. Alarm screen
(1) Quickly turn on and off the alarm: Under the alarm interface, short press
the S2 button to turn
on/off the alarm. (2) Set the alarm:
Long press S2 button for 2 seconds to enter hour value setting, short press S2
button to switch sequentially: hourminute-snooze (SLEEP) switch-exit setting.
Setting state, short press S1 button to change the value. 30 seconds without
button operation, automatically save and exit the setting state. When the
alarm marker is switched on, it will be displayed in any status. (3) Alarm
(clock) The alarm time of is 20 seconds, the alarm icon will flash in any
interface when the alarm rings, and the alarm can be cancelled by pressing any
button. When SLEEP is turned on, snooze every 7 minutes for a total of 2
snoozes and 3 alarms.
5. Backlight Each time you press the S2 button, the backlight will light up
for 2 seconds.
1. This device is equipped with removable built-in battery. Do not replace
the battery by yourself to avoid damaging the battery or the parts of the
movement. 2. Strong static charge interference can make the display screen not
display properly and even damage the watch parts inside. 3. Do not press the
S1 and S2 buttons hard. 4. It should not be worn when taking a bath or
swimming. 5. Do not expose the Watch to a place with high moisture or
extremely high or low temperature for a long time. 6. If you need to clean the
watch or strap, use a soft dry cloth to wipe with water or a neutral
detergent, never use volatile chemicals. 7. The paint on this watch may fade
due to strong pressure, collision, abrasion, friction, an so on. 8. When not
using this watch, please place it in a dry place. 9. The company reserves the
right to modify the contents of this manual without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>