HueRich HR-2G4012S LED Bulb Remote Control Instruction Manual
- June 13, 2024
- HueRich
Table of Contents
HueRich HR-2G4012S LED Bulb Remote Control
Product Information
The Huerich 2.4G remote control is a high-performance LED bulb that supports remote control, wireless remote control, light switch control, timing off, brightness adjustment, and color temperature adjustment. It does not require additional wiring and offers simple installation, easy operation, and safe and stable performance. This intelligent lighting solution is suitable for different scene requirements without any other changes. The LED bulb can directly replace traditional lamps and is widely used in living rooms, kitchens, hotels, clubs, meeting rooms, and other places.
Product Usage Instructions
- Remote Control Key Mapping: Refer to the user manual for key mapping details.
- Basic Function Operations:
- Code Operation: The remote control needs to be coded with the LED bulb light before use. Follow these steps:
- Install the LED bulb and ensure the power connection is complete.
- Cut off the power for 10 seconds and then reconnect it.
- Within 5 seconds of powering on, press the “on” key on the remote control.
- The LED bulb will flash, indicating a successful code operation.
Note: One remote control can control a maximum of 15 bulbs, but each bulb can only accept a maximum of three remote control matches.
FCC Warning Statements
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
Functional features
- This product is a high performance LED bulb supporting remote control, wireless remote control, control light switch and timing off, adjust brightness, color temperature. No additional wiring, simple installation, easy operation, safe and stable. The intelligent lighting of lamps is realized, which is suitable for different scene requirements without other changes.
- 2.4G high frequency wireless remote control, with low power consumption, long transmission distance, strong anti-interference ability, high air communication rate characteristics. The remote control is stylish and beautiful in appearance, practical and simple in function, and comes with power off memory (that is, when it is turned off or turned on again after power off, the bulb will automatically retain the light state before shutdown). And has a small night light, and other specific scene one-click direct function.
- Can directly replace the traditional lamps, widely used in living room, kitchen, living room, hotel, club, meeting room and other places.
Remote control key mapping
Basic function operations
- Code: The remote control can only be used after code operation with the LED bulb light, the method is as follows: Install the LED bulb, confirm that the power connection is complete, cut off the power 10 seconds after the power to reconnect the power, in the power on instant (within 5 seconds), press the remote control on the key, the bulb will flash, indicating that the code is successful.
- Note: One remote control can control a maximum of 15 bulbs, but a bulb can only accept a maximum of three remote control matches.
FCC warning statements
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, usesr and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>