SENCOR SWS TH4100 B Thermo Hygro Outdoor Sensor User Manual

: June 13, 2024
: SENCOR

Table of Contents

SENCOR SWS TH4100 B Thermo Hygro Outdoor Sensor
Product Information
Product Usage Instructions
OVERVIEW
Warranty conditions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SENCOR SWS TH4100 B Thermo Hygro Outdoor Sensor

Product Information

The SWS TH4100 is a wireless sensor designed to measure temperature and humidity. It is equipped with an LED light, a battery compartment, a hanging hole, a channel shift button, and a rope hanging hole. The sensor operates on a frequency of 433.92 MHz and has a transmission range of approximately 50 meters in an open area. It requires 2 AA batteries for power.

Function
The SWS TH4100 wireless sensor has a low battery indicator that sends a signal to the main unit when the battery is running low. It is recommended to use alkaline dry batteries instead of rechargeable batteries.

Precautions

Do not clean any part of the product with benzene, thinner, or other solvent chemicals. When necessary, clean it with a soft cloth.
Dispose of packaging material at a public waste disposal site.
The product should not be treated as household waste when disposing of used electrical and electronic appliances.
For disposal information in the European Union, request necessary information from your seller or supplier.
For disposal information in countries outside the European Union, request necessary information from local government departments or your seller.

Product Usage Instructions

Power On or Reset

Before powering on, push the channel shift button to choose the desired channel. If there is only one channel, it is recommended to stay on channel 1.
After powering on, the sensor will immediately detect temperature and humidity data. The red LED light will flash, indicating that it is sending out a signal.

433.92 MHz Reception Check
The main unit should receive the temperature data within 3 minutes after setup. The transmission cycle for each channel is as follows

Channel 1 : 114 seconds
Channel 2 : 134 seconds
Channel 3 : 158 seconds

If the temperature data is not received within 3 minutes, please check the following

Ensure that the distance between the main unit and transmitter is at least 5-6.5 feet (1.5-2 meters) away from any interfering sources such as computer monitors or TV sets.
Avoid positioning the thermometer onto or in the immediate proximity of metal window frames.
Avoid using other electrical products such as headphones or speakers operating on the same signal frequency.
Interference from neighboring electrical devices operating on the same signal frequency can also cause issues.

Position Method
The sensor can be placed in the following ways

Put it on a flat area directly.
Hang it on the wall using the hanging hole and a nail.
Hang it with a rope using the rope hanging hole.

OVERVIEW

LED light
Battery compartment
Hanging hole
Channel shift
Rope hanging hole

Function

Temperature range : -40°C ~ +60°C ,Resolution 0.1°C
Humidity Range :20%-95%,Resolution 1%
Low voltage indication
3 channels max
Channel Shift, push to switch from Channel 1, Channel 2, Channel 3
LED light flash during transmitting
Waterproofing for daily use, lever : IP54.
Power by 2*AA batteries

LOW BATTERY INDICATOR
The sensor will send signal to main unit.
We recommend to use alkaline dry battery, instead of rechargeable batteries.

OPERATION INSTRUCTION
Before power on, please push the channel shift to chose the channel you desire. If only 1 channel, we recommend you to stay channel 1.

POWER ON OR RESET
After Power on, the sensor will detect temperature and humidity data immediately, then the red led light will flash,and sending out signal.

433,92 MHZ RECEPTION CHECK
The transmission range is about 50 meters from the transmitter to the thermometer (in open area). The main unit should receive the temperature data with 3 minutes after set-up.

Transmitting cycle : CH1: 114S, CH2: 134S, CH3: 158S

If the temperature data is not received 3 minutes after setting up, please check

The distance of main unit and transmitter should be at least 5~6.5 feet (1.5~2 meters) away from any interfering sources such as computer monitors or TV sets.
Avoid positioning the thermometer onto or in the immediate proximity of metal window frames.
Using other electrical products such as headphones or speakers operating on the same signal frequency.
Neighbors sing electrical devices operating on the same signal frequency can also cause interference.

POSITION METHOD
The sensor can be placed in bellow 3 ways.

Put on flat area directly
Hang on wall by hanging hole with a nail.
Hang with a rope with Rope hanging hole

PRECAUTIONS

Do not clean any part of the product with benzene, thinner or other solvent chemicals. When necessary, clean it with a soft cloth.
Never immerse the product in water. This will damage the product.
Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of different types.
Do not mix alkaline, standard or rechargeable batteries with this product.
Remove the batteries if storing this product for a long period of time.
Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS
Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste.
Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.
The product meets EU requirements.
Hereby, FAST ČR, a.s. declares that the radio equipment type SWS TH4100 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address
www.sencor.com
Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes. The original version is in the Czech language.
Address of the manufacturer: FAST ČR, a.s., U Sanitasu 1621, Říčany CZ-251 01

Warranty conditions

Warranty card is not a part of the device packaging.

This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The claim for service can be applied either at dealer’s shop where the product was bought, or at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately when the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted. In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim application till the date of taking over the product by end-user, or the date the end-user is obligated to take it over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed following documents receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows

Defects which were put on sale.
Wear-out or damage caused by common use.
The product was damaged by unprofessional or wrong installation, used in contrary to the applicable instruction manual, used in contrary to legal enactment and common process of use or used for another purpose which has been designed for.
The product was damaged by uncared-for or insufficient maintenance.
The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).
Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
The product was mechanically damaged (e.g. broken button, fall).
Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable working conditions (e.g. high temperatures, high humidity, quakes).
Repair, modification or other failure action to the product by unauthorized person.
End-user did not prove enough his right to claim (time and place of purchase).
Data on presented documents differs from data on products.
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged).

Manufacturer
FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic
Visit www.sencor.com for detailed information about authorized service centers.
The original version of the instructions is in the Czech language, other language versions are made by the appropriate translation.