Denuo Novo 02-17-24-v1 Classic Stormtrooper Kit Bundle Instructions
- June 1, 2024
- Denuo Novo
Table of Contents
Denuo Novo 02-17-24-v1 Classic Stormtrooper Kit Bundle
Specifications
- Product Name : Stormtrooper Armor Kit
- Assembly Date: 02-17-2024-v1
- Parts List : Includes various parts for assembly
- Strapping System: Consists of multiple pieces for securing the armor
- Hardware: Includes wood screws, snap assemblies, ABS plastic, split rivets & washers
Product Usage Instructions
Assembly Instructions:
Follow the detailed assembly instructions provided in the manual to put
together the Stormtrooper Armor Kit.
Parts List:
Refer to the parts list to ensure you have all the necessary components
before starting the assembly process.
Strapping System:
Utilize the strapping system with various webbings, elastics, hooks, and
snaps to secure the armor in place.
Hardware:
Use the included wood screws, snap assemblies, ABS plastic, split rivets,
and washers as needed during assembly.
FAQ
-
How many parts are included in the Plastic Strips section?
The Plastic Strips section consists of 18 parts numbered from 36 to 42. -
What is the quantity of Wood Screws provided and their usage?
There are 5 Wood Screws included, with 4 used on the Detonator and 1 kept as a spare. -
What are the components of the Strapping System?
The Strapping System includes various webbings, elastics, hooks, and snaps to secure the armor effectively.
PARTS LIST
Plastic Strips – 18 Parts (36-42)
Strapping System
Strapping System
Hardware
QTY (5) Wood Screw
- 4 – Used on Detonator
- 1 – spare.
QTY (6) Snap Assembly (Male)
- 2 – Used on Ab to Hold belt
- 1 – Used on Ab for Side Strap
- 2 – Used on Butt Plate.
- 1 – Spare.
QTY (4) Snap Assembly (Male) QTY (2) ABS Plastic
QTY (7) Split Rivets & Washers
- 2 – Knee
- 1 – Cod
- 3 – Kidney
- 1 – Spare
TOOLS NEEDED
- Utility knife
- CA (Cyanoacrylate) glue
- Snap setting tool
- Drill
- Hammer
- Screwdrivers (Slotted and Phillips)
- Scissors
- Masking tape
- Clamps
- Ruler or Straight Edge
- Paintbrush
- Pencil
- Sandpaper
SAFETY
- Use caution when handling sharp instruments and tools.
- Wear safety glasses, dust mask and work gloves during assembly to prevent injury.
- Stay in well ventilated area when using any glue or paint.
- Keep small children away from poly-bags and all tools.
COMMON TECHNIQUES
SCORE AND SNAP
SANDING EDGES
GLUING (sand surfaces to be glued)
MALE SNAPS (be sure to follow instructions included with your specific snap tool)
HOOK and LOOP (be sure to clean the surface before applying adhesive Hook and Loop)
SPLIT RIVETS
TRIMMING PARTS
(Locate and mark cut line with pencil before scoring, then cut along molded
trim line on ALL untrimmed parts)
RECOMMENDED METHOD FOR SUITING UP
- Undersuit
- Neck seal
- Thighs
- Boots (not included)
- Calves (Wrap around legs, over boots, and close with Hook and Loop fasteners.)
- Torso Assembly with Shoulders
- Snap Thigh Straps to Lower Abdomen/Codpiece
- Attach Hook and Loop Straps on right side of the Lower Abdomen/Codpiece to the Lower Kidney Plate
- Belt (Snap to front of Lower Abdomen/ Codpiece and close in rear withHook and Loop fasteners)
- Detonator (Clip on back of belt)
- Gloves
- Biceps (Attach top Hook and Loop strap to Shoulder)
- Slide on Forearms
- Slide on Hand Plates with straps
