ASUS VZ229 Series LCD Monitor User Guide

VZ229 Series
LCD Monitor
User Guide

VZ229 Series LCD Monitor

First Edition January 2017

Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.

Notices

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This product implements power management functionality. In case of no signal input after 10 seconds, the product automatically goes to sleep/ standby mode.

As an Energy Star® Partner, our company has determined that this product meets the Energy Star® guidelines for energy efficiency.

Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.

Safety Information

• Before setting up the monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
• This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

| WARNING: Information to prevent injury to yourself when trying to complete a task.
---|---
| CAUTION: Information to prevent damage to the components when trying to complete a task.
| IMPORTANT: Information that you MUST follow to complete a task.
| NOTE: Tips and additional information to aid in completing a task.

Where to nd more information
Refer to the following sources for additional information and for product and software updates.

1. ASUS websites
   The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com

2. Optional documentation
   Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region.

Welcome!

Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you!

1.2 Package Contents
Check your package for the following items:

LCD monitor
Monitor Base
Quick Start Guide
Warranty Card
Adaptor
Power Cord (optional)
VGA cable (optional)
DVI cable (optional)
HDMI cable (optional)
Audio cable (optional)

• If any of the above items is damaged or missing, contact your retailer immediately.

CAUTION

1.3 Assembling the Monitor Base

1. Have the front of the monitor face down on a table.
2. Attach the base to the arm.
3. Turn the screw clockwise to secure the base. Then adjust the monitor to the angle that is most comfortable for you.

 • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

1.4 Connect Cables
1.4.1 Rear of the LCD Monitor

1. Speakers
2. Control buttons
3. Kensington Lock
4. HDMI port| 5. VGA port
6. Audio-IN port
7. DC-IN port
8. DVI port
---|---

1.5 Monitor Introduction
1.5.1 Using the Control Buttons
Use the control buttons on the bottom of the monitor to adjust the image settings. Press key 1-6 to activate the key list page.

1. Shortcut Key2:
   • This is a Shortcut key. The default Blue Light Filter setting is Level 0.

2. Shortcut Key1:
   • This is a Shortcut key. The default setting is Brightness.

3. QuickFit Button:
   • This is a hotkey to activate the QuickFit function designed for alignment.
   • The QuickFit function contains several options of common grid pattern and photo size. See page 1-6 for details.

4. Input Button (for VZ229H/VZ229HE model only): Switch the input source.
   Auto Adjust Button (for VZ229N model only): Automatically perform Auto Adjust (only available for VGA input).

5. Close Button:
   • Exit the OSD menu.

6. Menu Button:
   • Enter the OSD menu.

7. Power Button/Power Indicator:
   • Press this button to turn the monitor on/off.
   • The color definition of the power indicator is as the table below. Status| Description
   ---|---
   White| ON
   Amber| Standby mode
   OFF| OFF

1.5.2 QuickFit Function
The QuickFit function contains two patterns: (1) Grid (2) Photo size.

1. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel.

2. Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen.

Adjusting the Monitor

• For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.

• Hold the stand to prevent the monitor from falling while changing its angle.

• You can adjust the monitor’s angle from -5° to 22°. -5° to +22°

• It is normal that the monitor slightly shakes while you adjust the viewing angle.

OSD (On-Screen Display) Menu

3.1.1 How to Recongure

1. Press the Menu button to activate the OSD menu.
2. Press the ▼ and ▲ buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu, press the button.
4. Press the ▼ and ▲ buttons to select the desired parameter.
5. Press the  button to enter the slide bar and then use the ▼ and ▲ buttons, according to the indicators on the menu, to make your changes.
6. Select to return to previous menu or  to accept and return to previous menu.

3.1.2 OSD Function Introduction

1. Splendid
   This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. • Scenery mode: This is the best choice for scenery photo displaying with SPLENDIDTM Video Intelligence Technology.
   • Standard Mode: This is the best choice for document editing with SPLENDIDTM Video Intelligence Technology.
   • Theater Mode: This is the best choice for movie watching with SPLENDIDTM Video Intelligence Technology.
   • Game Mode: This is the best choice for game playing with SPLENDIDTM Video Intelligence Technology.
   • Night View Mode: This is the best choice for playing dark-scene game or watching dark-scene movie with SPLENDIDTM Video Intelligence Technology.
   • sRGB Mode: This is the best choice for viewing photos and graphics from PCs.
   • Reading Mode: This is the best choice for book reading with SPLENDIDTM Video Intelligence Technology.
   • Darkroom Mode: This is the best choice for a weak ambient light environment with SPLENDIDTM Video Intelligence Technology.
   • In the Standard Mode, the Saturation, Skin Tone, Sharpness, and ASCR functions are not user-congurable.
   • In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness, Contrast, and ASCR functions are not user-congurable.
   • In the Reading Mode, the Saturation, SkinTone, ASCR, Contrast, and Color Temp. functions are not user-congurable.

2. Blue Light Filter
   Reduce the energy level of blue light emitted from LED backlight.
   • Level 0: No change.
   • Level 1~4: The higher the level, the more blue light will be reduced.
   • When Blue Light Filter is activated, the default settings of Standard Mode will be automatically imported.
   • Between Level 1 to Level 3, the Brightness function is user-congurable.
   • Level 4 is optimized setting. It is compliance with TUV Low Blue Light
   Certication. The Brightness function is not user-congurable.
   • To alleviate eye strain, rest your eyes for fteen minutes for every two hours spent in front of the screen. Frequent blinking and eye exercise helps keep your eye moist to prevent them from drying out. In addition, your computer screen should be placed 20 to 28 inches (50-70cm) away from you.

3. Color
   Select the image color you like from this function.
   • Brightness: Adjust the brightness level. The adjusting range is from 0 to 100.
   • Contrast: Adjust the contrast level. The adjusting range is from 0 to

4. • Saturation: Adjust the saturation level. The adjusting range is from 0 to 100.
   • Color Temp.: Select the desired color temperature. Available options: Cool, Normal, Warm, and User Mode.
   • In the User Mode, colors of R (Red), G (Green), and B (Blue) are usercongurable; the adjusting range is from 0 ~ 100.
   • Skin Tone: Select the desired skin color. Available options: Reddish, Natural, and Yellowish.

5. Image
   You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR, Position, Focus, and Auto Adjust from this main function.
   • Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100.
   • Trace Free: Speed up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.
   • Aspect Control: Adjust the aspect ratio to “Full” or “4:3”.
   • 4:3 is only available when input source is in 4:3 format.
   • VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0~100.
   • ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.
   • Position: Adjust the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (only available for VGA input).
   • Focus: Reduce the Horizontal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 (only available for VGA input).
   • Auto Adjust: Automatically perform Auto Adjust (only available for VGA input).

6. Input Select
   Select the input source.
   VZ229H/VZ229HE
   VZ229N
   

7. System Setup
   Adjust the system conguration.
   VZ229H
   VZ229N/VZ229HE
   • Splendid Demo Mode: Activate the demo mode for the Splendid function.
   • Volume (for VZ229H model only): Adjust the volume level.
   • ECO Mode: Activate the ecology mode for power saving.
   • OSD Setup: Adjust the OSD Timeout, DDC/CI, and Transparency of the OSD screen.
   • Language: Select the OSD language.
   • Key Lock: Pressing the second button on the right for more than five seconds to activate the key lock function.
   • Information: Display the monitor information.
   • More: Return the next page of System Setting.
   • Back: Return the previous page of System Setting.
   • Power Indicator: Turn the power LED indicator on/off.
   • Power Key Lock: Disable/Enable the power key.
   • All Reset: Select YES to revert all settings to the factory default mode.

8. Shortcut
   Assign the specific function to the two shortcut keys.
   VZ229H
   (Shortcut 1)
   (Shortcut 2)
   

VZ229N/VZ229HE
• Shortcut 1: Assign a function to the Shortcut Key1. Available options: Blue Light Filter, Splendid, Brightness, Auto Adjust, Contrast, Color Temp., Volume (for VZ229H model only), and GamePlus. The default setting is Brightness.
• Shortcut 2: Assign a function to the Shortcut Key2. Available options: Blue Light Filter, Splendid, Brightness, Auto Adjust, Contrast, Color Temp., Volume (for VZ229H model only), and GamePlus. The default setting is Blue Light Filter.

3.1.2.1 GamePlus Function
The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. In addition, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games.

To activate GamePlus:

1. Press the Menu button to activate the OSD menu.
2. Press the ▼ or ▲ button to select Shortcut. Then press the button to enter the Shortcut menu.
3. Press the ▼ or ▲ button to select Shortcut 1 or Shortcut 2.
4. Press the button to enter the Shortcut 1 or Shortcut 2 submenu.
5. Press the ▼ or ▲ button to select GamePlus. Then press the button to conrm the GamePlus submenu.
6. Press the ▼ or ▲ button to select Crosshair or Timer. Then press the  button to conrm the selection.
7. Press the button repeatedly to exit the OSD menu.
8. Press the assigned Shortcut Key1 or Shortcut Key2 to activate the GamePlus main menu.

Specifications

mm)
Max. Resolution| 1920 x 1080
Brightness (Typ.)| 250 cd/m 2
Contrast Ratio (Typ.)| 1000:1
Viewing Angle (CR≤10)| 178°(V); 178°(H)
Display Colors
Response Time| 16.7M colors (6 bits + Advanced-FRC)
5ms (GTG)
Terminals| Inputs:| | VGA x 1, DVI x 1
Audio
input:| Yes| N/A| N/A
Audio
Speaker| Speaker
output:| 1.5W x 2| N/A| N/A
Power consumption**| 25W in Test Line
Pattern with audio| 22W in Test Line
Pattern without audio| 21W in Test Line
Pattern without audio
Standby power consumption| < 0.5W at AC110V~ AC220V
Power off power consumption| < 0.5W at AC110V~ AC220V
Phys. Dimension (incl. base) (HxWxD)| 379.9 x 497.9 x 210.1 mm
Box Dimension (HxWxD)| 490 x 568 x 128±5 mm
Net Weight (incl. stand)| 2.4 ±1.0 kg
Gross Weight (Esti.)| 3.7 ±1.0 kg
Voltage Rating| Delta: ADP-40KD BB, 19Vdc 2.1A, AC100~240V at 50/60Hz
Delta: ADP-33W A/B/C, 19Vdc 1.75A, AC100~240V at 50/60Hz (VZ229HE)
Lite-on: PA1330-39 AE/AC/AU, 19Vdc 1.75A, AC100~240V at 50/60Hz (VZ229HE)
Temperature| Operating temperature: 0 ~ 40˚C
Storage temperature: -30 ~ 65˚C
Accessories| Adaptor, Power cord (optional), Quick Start Guide, Warranty card,
VGA cable (optional), DVI cable (optional), HDMI cable (optional), Audio cable (optional)
Compliance and Standards| UkrSEPRO, CE, CB, BSMI, FCC, CCC, VCCI, RCM(C-tick),
UL/cUL, MSIP(KCC), Energy Star 7.0, HDMI, Windows Vista & 7/8/10 WHQL, China Energy Label, E-Standby, KC, TCO 7.0, GEMS, EPEAT Silver, RoHS(China RoHS, J-Moss), WEEE, ErP( Energy Saving Only), CU

*Speci昀椀cations subject to change without notice.
** measuring a screen brightness of 200 nits without audio/ USB/ Card reader connection.

Troubleshooting (FAQ)

on.
•  Check if the adapter and power cord are properly connected to the monitor and the power outlet.
•  Check the Power Indicator function in the OSD menu. Select “ON“ to turn on the power LED.
The power LED lights amber and there is no screen image| •  Check if the monitor and the computer are turned on.
•  Make sure the signal cable is properly connected the monitor and the computer.
•  Inspect the signal cable and make sure none of the pins are bent.
•  Connect the computer with another available monitor to check if the computer is properly working.
Screen image is too light or dark| •  Adjust the Contrast and Brightness settings via OSD.
Screen image bounces or a wave pattern is present in the image| •  Make sure the signal cable is properly connected to the monitor and the computer.
•  Move electrical devices that may cause electrical interference.
Screen image has color defects (white does not look white)| •  Inspect the signal cable and make sure that none of the pins are bent.
•  Perform Reset via OSD.
•  Select the appropriate color temperature (Color Temp.) via OSD.
No sound or sound is low| •  Adjust the volume settings of your monitor or computer.
•  Make sure the computer sound card driver is properly installed and activated.

Supported Timing List

VESA / IBM Modes Support Timing

Mode| Resolution (active dot)| Resolution (total dot)| Horizontal Frequency
(KHz)| Vertical Frequency (Hz)| Nominal Pixel Color (MHz)
---|---|---|---|---|---
DOS| 720x400070Hz| 900 x 449| 31.| 70.| 28.
VGA| 640x480060Hz| 800 x 525| 31.| 59.940| 25.
640×480@72Hz| 832 x 520| 38.| 73.| 31.500
640×480@75Hz| 840 x 500| 37.500| 75.000| 31.500
SVGA| 800×600@56Hz| 1024 x 625| 35.| 56.250| 36.000
800×600@60Hz| 1056 x 628| 38.| 60.| 40.000
800×600@72Hz| 1040 x 666| 48.| 72.| 50.000
800x600075Hz| 1056 x 625| 47.| 75.000| 49.500
XGA| 1024x768060Hz| 1344 x 806| 48.| 60.| 65.000
1024x768070Hz| 1328 x 806| 56.| 70.| 75.000
1024x768075Hz| 1312 x 800| 60.| 75.| 78.750
VESA| 1152×864@75Hz| 1600 x 900| 68.| 75.000| 108.00
SXGA| 1280x1024060Hz| 1688 x 1066| 64.| 60.020| 108.000
1280x1024075Hz| 1688 x 1066| 80.| 75.| 135.00
1280x9604160Hz| 1800 x 1000| 60.000| 60.000| 108.00
WXGA| 1280x800060Hz| 1680 x 831| 50.| 59.810| 83.500
1280x720060Hz| 1650 x 750| 45.00| 60.000| 74.
1280x768060Hz| 1664 x 798| 48.| 59.870| 80.
1360x768060Hz| 1792 x 795| 48.| 60.| 85.500
1366x768060Hz| 1792 x 798| 48.| 59.790| 85.500
WXGA+| 1440x900060Hz| 1904 x 934| 56.| 60.| 106.500
UXGA| 1600×120015)60Hz| 2160 x 1250| 75.000| 60.000| 162.000
WSXGA+| 1680×1050@60Hz| 2240 x 1089| 65.290| 60.| 146.250
VVUXGA| 1920×10801,60Hz| 2200 x 1125| 67.500| 60.000| 148.500
MAC| 640×480@66.66Hz| 864 x 525| 35| 67.| 30.
SVGA| 832x624075Hz| 1152 x 667| 50.| 75.| 57.

• Modes not listed in the table may not be supported. For optimal resolution, we recommend that you choose a mode listed in the table above.

References

• ASUS Global
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>