Sloan Valve 3780100 3.5 gpf Manual Flush Valve Instruction Manual
- June 13, 2024
- Sloan Valve
Table of Contents
Sloan Valve 3780100 3.5 gpf Manual Flush Valve
Product Information
| Code Number | 3780100 |
|---|---|
| Model | SLOAN 110-3.5 |
| Variation | Dual Flush (Not Shown) |
| Compliances & Certifications |
Product Usage Instructions
This product is designed for a specific rough-in measurement.
Please ensure that the rough-in measurement matches the specifications of the
SLOAN 110-3.5 model.
To use the SLOAN 110-3.5, follow the steps below:
- Make sure the water supply to the toilet is turned on.
- To flush, press the flush button or lever located on the top or front of the toilet tank.
- For a full flush, press and hold the flush button or lever until the flushing process is complete.
- For a half flush, quickly press and release the flush button or lever.
- After flushing, wait for the tank to refill with water before using the toilet again.
Note: The SLOAN 110-3.5 model is a dual flush toilet, providing the option for a full flush or a half flush depending on the waste volume. This feature helps conserve water by using less for smaller flushes.
CODE NUMBER
3780100
DESCRIPTION
3.5 gpf, Polished Chrome Finish, Fixture Connection Top Spud, Single Flush, Sloan® Exposed Manual Water Closet Flushometer.
DETAILS
- Flush Volume: 3.5 gpf (13.2 Lpf)
- Finish: Polished Chrome (CP)
- Valve: Diaphragm
- Valve Body Material: Semi-red Brass
- Fixture Type: Water Closet
- Fixture Connection: Top Spud
- Rough-In Dimension: 11 ½” (292mm)
- Spud Coupling: 1 ½” (38mm)
- Supply Pipe: 1″ (25mm)
FEATURES
- High Chloramine Resistant PERMEX® Synthetic Rubber Diaphragm with Linear Filtered Bypass and Vortex Cleansing ActionTM
- 1” I.P.S. Screwdriver Bak-Chek® Angle Stop with Vandal Resistant Stop Cap
- Vacuum Breaker with Flush Connection
- Spud Coupling and Spud Flange for 11⁄2” Top Spud
- Sweat Solder Adapter with Cover Tube and Cast Wall Flange
- Non-Hold-Open Handle and No External Volume Adjustment to Ensure Water Conservation
- Diaphragm, Handle Packing and Vacuum Breaker Molded from PERMEX® Rubber Compound for Chloramine Resistance
- ADA Compliant Metal Oscillating Non-Hold-Open Handle
COMPLIANCES & CERTIFICATIONS
(ADA Compliant, UPC Certified, BAA Compliant)
RECOMMENDED SPECIFICATION
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with
ASTM Alloy Classification for Semi- Red Brass. Valve shall be in compliance
with the applicable sections of ASSE 1037 and ANSI/ASME 112.19.2.
VALVE OPERATING PRESSURE (FLOWING) 15 – 80 PSI (103 – 552 kPa). Specific
fixtures may require greater minimum flowing pressure – consult manufacturer
requirements.
DOWNLOADS
- Sloan Exposed Installation Instructions
- Sloan Exposed (Spanish) Installation Instructions
- Control Stop Repair and Maintenance Guide
- Flush Connections Flanges Repair and Maintenance Guide
- Tail Piece Repair and Maintenance Guide
- Sloan Flushometer Repair and Maintenance Guide
- Additional Downloads
NOTES
- All information contained within this document subject to change without notice.
- Looking for other variations of the SLOAN 110 product? View the general spec sheet with all options.
- Find a compatible urinal for this flushometer.
- Find a compatible water closet for this flushometer.
DIAGRAM
ROUGH-IN
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: 800.982.5839 • Fax: 800.447.8329 • sloan.com
Code 3780100 • Downloaded 05/06/23 • 04/22/23 • View Latest Version
References
- Water-Efficient Commercial Bathroom Products | Sloan
- Water-Efficient Commercial Bathroom Products | Sloan
- SLOAN 110 | Sloan
- Urinals | Commercial Urinals | Industrial Urinals - Sloan
- Water Closets | Water Closet Toilet | ADA Water Closet - Sloan
- sloan.com/general-spec/1051
- sloan.com/spec-sheet/3780100
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>