SPYPOINT 602399 LM2 Cellular Trail & Wildlife Camera User Guide
- June 13, 2024
- SPYPOINT
Table of Contents
Quick start guide
IN THE BOX
- LM2 camera
- Antenna
- SIM card (preactivated and inserted in the camera)
- Installation strap
BEFORE YOU GO TO THE FIELD
Getting ready, first time use
Format your memory card.
Long format your microSD card using a computer with an integrated microSD card
slot or USB SD card reader.
Create an account on spypoint.com/activate
Download the SPYPOINT app and sign in.
In the Cameras tab, press the + button.
Follow the instructions on the screen to add your camera.
Screw in antenna & insert **memory card, batteries.
** Fill both sides of battery tray and insert following arrow orientation.
Turn your camera ON.
-
STATUS light will flash red, orange, green 2 times then while searching for signal (can take several minutes).
-
STATUS light will indicate signal strength.
= Good = Fair
= Weak or = No signal
If red, move camera to a new location and repeat step 6. -
Upper delay light will flash for 30s.
-
When all the lights turn OFF the camera is ready to use.
Test your camera.
With the battery door open, move in front of the device. STATUS light will
turn green then orange. Once the STATUS light turns OFF, check your app to
ensure the photo has been received.
Turn your camera OFF until you’re ready to install it in field.
IN THE FIELD
Install your camera.
Turn your camera ON & test it.
(Steps 6 & 7)
COMPONENTS
- Antenna
- Detection lens
- Photo lens
- Light sensor
- Delay light
- MicroSD card slot
- STATUS light
- SIM card slot
- Battery compartment
- OFF/ON switch
- LED
- Door
- Slots for installation strap
- Locking latch
- Cable lock hole
- Battery holder
- Antenna O-Ring
- 12 V jack
- Screw-thread for standard ¼”-20 tripod mount
DISPOSAL
Only use original spare parts and accessories.
Only use original spare parts and accessories. If, one day, your camera has
been used so intensively that it has to be replaced, or if you no longer have
any use for it, you are obliged to dispose of it at a recycling center.
Information on return points for your electrical appliance can be obtained
from your local waste disposal company or from your local administrative
offices.
Electrical appliances not only contain valuable recyclable raw materials, but
also substances which, if disposed of improperly, can affect public health and
the environment.
Help ensure that valuable raw materials are recycled by returning your old
appliance to a central collection point.
The WEEE (Waste Electrical and Electronic Equipment Directive) symbol
represents the obligation.
FREQUENCY
Details available on the LM2 help web page
(spypoint.com/LM2-guide)
FCC
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions :
- This device must not cause harmful interference ;
- This device must accept any interference received, including interference that may cause undesired operation.
WARRANTY
2-year limited warranty, visit spypoint.com/warranty for complete details.
Scan for detailed instructions, LED light pattern descriptions, complete user
manual & other helpful information:
spypoint.com/LM2-guide
Need assistance?
Just contact us!
spypoint.info/en/support-2/
+49 (0) 36331-403333
Made in China
References
- Spypoint
- Spypoint
- SPYPOINT Limited Warranty
- Homepage - spypoint.info
- Support - spypoint.info
- Soporte - spypoint.info
- Tuki - spypoint.info
- Soutien - spypoint.info
- Supporto - spypoint.info
- Support - spypoint.info
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>