TickiT 75544 Series Sensory Mood Light Instructions
- October 31, 2023
- TickiT
Table of Contents
TickiT 75544 Series Sensory Mood Light
Product Information
The Sensory Mood Light is a versatile lighting device that creates a soothing and relaxing ambiance. It features 16 different colors and 4 lighting modes to suit your mood and preferences. The light can be controlled using the included remote control, allowing you to adjust the brightness, select colors, and choose between different lighting modes. The device is powered by a DC5V lithium button cell and should be continuously connected to a power source.
Product Usage Instructions
- Getting Started:
- Connect the Sensory Mood Light to a power source.
- Remote Control Instructions:
- To control the brightness, use the brightness control buttons on the remote control.
- To select a color, use the color selection buttons on the remote control. There are 16 different colors to choose from.
- To turn the light on or off, use the ON/OFF button on the remote control.
- To activate the flash mode, press the flash mode button on the remote control. The light will flash in a pattern.
- The light also has three other lighting modes: Strobe, Fade, and Smooth. Use the corresponding buttons on the remote control to switch between these modes.
- Technical Specifications:
- The Sensory Mood Light operates on DC5V power.
- Warnings:
- Ensure that the device is continuously connected to a power source.
- Troubleshooting:
- If you encounter any issues with the Sensory Mood Light, refer to the troubleshooting section of the user manual for assistance.
Getting Started
- Select the correct charging adaptor (UK/EU/US/AU).
- Open the rubber cover charging socket on the base and plug in the charger.
- Always charge with the light in the OFF position.
- If light comes on during charging, use the ON/OFF button on the base to turn it OFF.
- Charge for 8-10 hours, unplug the charger and replace the rubber cover before use.
- Do not use continually with the charger connected to the mains.
Remote Control Instructions
Technical Specifications
- (IP65 rated) Light unit suitable for indoor or outdoor use.
- Operating time 5-10 hours (depending on program setting).
- Charger Input – AC 110V-240V 50/60HZ – Output DC5V.
- Battery replacement for remote: CR2025 Lithium Button Cell.
Warnings
- Suitable for use with children under adult supervision. This is not a toy.
- Power adapter & remote are not waterproof, keep away from water.
- In fast flashing or strobe mode the light source may potentially trigger seizures with children that have a history of photosensitive epilepsy.
- Remote contains button battery – Keep new and used batteries away from children. Dispose of used batteries immediately. A button battery can cause serious injuries if it is swallowed or placed inside any part of the body. If you think that batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- Please retain this information for future reference.
Trouble Shooting
- Light flashes uncontrollably – this means the battery is very low. Allow the light to flash until it goes OFF and then charge fully for 8-10 hours.
- Extend battery life by charging when power is low, rather than allowing light to become completely exhausted. Usage time will reduce when running Flash/Strobe/Fade/Smooth program.
- Remote not responding but light can be turned ON/OFF manually at the base – check that clear pull tab has been removed from the remote battery housing. Check the condition of the button cell, the + should be facing upwards.
©2023 TickiT®, Tonbridge, Kent, TN9 1RA, UK.
www.tickit.co.uk
Commotion (Europe) BV, Schiphol Boulevard 359, 1118BJ Schiphol, NL.
www.tickit.eu
References
Read User Manual Online (PDF format)
Loading......