POWERXCEL AFM-2124AS 620636 Smart Finder Instruction Manual
- June 13, 2024
- POWERXCEL
Table of Contents
AFM-2124AS, 620636
SMART FINDER
(KEEP LOCATE YOUR VALUABLE ITEMS) INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
“AND RETAIN FOR FUTURE USE ‘Works with
Apple Find My
Getting Started
- Remove the product from the packaging.
- Please retain all packaging after you have checked and counted all the parts and the contents against the parts list.
Package Contents
- Smart Finder
- CR2032 battery (preinstalled in the product)
- Instruction Manual
Key Features
- Smart Finder
- Uses Apple Find My App to locate your device
- Locate from iPhone, iPad, or Mac computer
- Simply attach the device to your keys, wallet, purse and you can start locating it remotely from your App
- Replaceable battery (button cell battery included)
- Siri compatible Safety Instructions
- Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
- Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent damage to the unit.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a quailed electrician. Improper repairs may place the user at serious risk.
- Do not use the unit with wet hands.
- Do not put objects into any of the openings.
- Keep the unit free from dust, lint etc.
- Do not use this unit for anything other than its intended use.
- Keep the unit out of reach of children.
- This appliance is not a toy.
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place such as sunshine, fire or the like.
Specifications
- Size (without the chain): Length 1.60 inch x Width 1.60 inch x Thickness 0 34 inch
- Suitable for: Keys, Wallet, Purse or other belongings
- Battery: CR2032 battery
- Standby time: About 6-8 months
- Net weight (with the chain and battery inside): -0.42 oz (-12g) • App Name: Find My
Description of Parts
Battery Replacement
Smart Finder Includes the battery (1 CR2032 Lithium battery); when battery is drained, replace battery as below:
- Use a small flat screwdriver to separate the front and back covers through the separate point.
- Replace the battery inside with a new CR2032 button cell battery as per the indicated polarity.
- Put back the back cover and secure both covers with its internal plastic locks.
WARNING
This product contains a Button Cell Battery. A swallowed Button Cell Battery
can cause internal chemical bums leading to death in as little as two hours.
Dispose of used batteries immediately. Keep new and used batteries away from
children. If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention. Do not mix with used
or other types of batteries.
Instructions for Use
Switch on/off the unit
Switch on : Short press the button once and you’d hear a ring chime,
indicating it is powered on and will be in pairing status.
Switch off: Long press the function button for three seconds it should beep
twice, indicating it is powered off.
Add your Smart Finder to the Find My App
- Open “Find My” App on your supported iPhone, iPod or Mac computer.
- Allow notifications from the App.
- Select “items” at the bottom, then tap “Add Item”,or tap on”+” icon directly.
- Select Other Supported Item
- 1t pop-up “Searching tems’
- Make sure your Smart Finder i cose 10 your phono. Wat . uni you soe “PX SMART FINDER, then. ap ‘Connect
- Follow the popup o il name, and select an emoy, hen tap ‘Continue’
- When “Ths tem Is Linke o Your Apple D” is pop-up, tap “Agree’
- Tap ‘Finish’ 0 finsh your Smart Findr set-up,
Function Introduction
-
Find ltoms
– Tap ‘Play Sound (o make. your Smart Finder beep when It is nearby. -
Find your ltem’s location
– Your Smart Findr’s fast known lacaion wil appear on the map as emoj you chose during Setup, ap ‘Directions’ o navigate o the fast known locaton.
Notifications
- Enable the “Notify When Found” teggle, when your Smart Finder’s location is seen by another “Find My* enabled device, you will receive a notification of its updated location.
- Enable the “Notify When Left Behind” toggle, you will receive a notification when you leave your Smart Finder behind and it is no longer in range of your device.
Note: “Notify When Found” can only be activated when your Smart Finder is out of range.
Lost Mode
-
When eu Smart Finder is lost under “Lost Mode”, tap the “Enable” tab, a screen calling Lost Mode will pop up, tab “Continue”. You can enter your phone number or email address and tap “Next”.
-
You may enter a message that will be shared with the person that finds your Smart Finder.
-
Tap “Activate” to enable “Lost Mode”. Note:
-
When”Lost Mode’s enabled,“Notification
When Found” is automatically enabled. -
When “Lost Mode” is enabled, your Smart Finder is locked and cannot be paired to a new device.
Rename Item -
Name of the Smart Finder can be renamed.
Remove Item -
Make sure “Lost Mode” is disabled and click “Remove Item”. After selecting the option, the system will pop up “Remove Item?” and click “Remove” to remove the device.
-
The Smart Finder is now reset and ready to pair to a new device.
System Requirements and Compatibility
- Apple ID
- Prore and models with iOS 14.5 or later.
- iPad models with iPadOS 14.5 or later.
To use the Apple Find My app to locate this Smart Finder, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS.
About the Find My App
The Apple Find My network provides an easy, secure way to locate Smart Finder using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch.
Learn More
- Smart Finder can be located by its owner using the Find my app. For more information, follow the instructions below.
- Locate the button on the front of the device.
- Press the button twice. You will hear a confirmation sound.
- Tap “Continue On Website” for more information including any Lost Mode message from the owner.
How to Disable
- Locate the button on the front of the device.
- Long press the function button three seconds until two beeps are heard. This will stop sharing the location of this Smart Finder.
Factory Reset
- Press the button 4 times rapidly and then hold it a fifth time until you hear a ringing chime.
- Areset operation is required to enable the device to enter the pairing state again (synchronization of Find My also requires simultaneous unbinding) and rebind the new Apple ID account.
How can I prevent my device from being used for malicious tracking
When someone else’s device mixes with your belongings, and tracks it over a period of time, you will be reminded in below two ways:
- If you have an iPhone, iPad, or etc Apple device, you will get alerts on your Apple device. This feature is available on iOS or iPadOS 14.5 version or above.
- If someone else’s device finds its way into your stuff, your iPhone will notice it is traveling with you and send you an alert.
After a while, if you still have not find it, the Smart Finder will start playing a sound to let you know where it is.
Important tips:
When pairing a device with Find My app, the phone will link to the Apple
server. Pairing may fail because of network problems. The following action is
recommended.
a.Change the phone’s network, such as switching between WiFi and mabile. The
first pairing may take a long time, please wait patiently.
b.Reset your Smart Finder.
c. When “Lost Mode” is enabled, DO NOT REMOVE ITEM in the APP. Your Smart
Finder will be locked and cannot be paired to a new device.
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and
regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS
and watchOS are the trademarks of Apple Inc. lOS is a trademark or registered
trademark of Cisco in the U.S. and other countries and is used under license.
Care and maintenance
Read the following recommendations before using the unit.
Following these you will be able to enjoy the product for many years.
- Don’t expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
- Don’t use abrasive cleaning solvents to clean the unit.
- Don’t expose the unit to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
- Don’t dispose of the unit in fire as it will result in an explosion.
- Don’t expose the unit to contact with sharp objects as this will cause scratches and damage.
- Don’t let the unit fall down onto the floor. The internal circuit might get damaged.
- Don’t attempt to disassemble the unit as it may get damaged if you are not professional.
FCC Instructions
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
product.
NOTE: This product has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This product generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
It the product does cause harmful interference to radio or television
reception, which can be determined by tuning the equipment off and on, the
user is encouraged to ty to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC ID: 2A6W7-BL001
Limited Warranty
This manufacturer’s product warranty extends to the original consumer
purchaser of the product. Neither the retailer nor any other company involved
in the sale or promotion of this product is a co-warrantor of this
manufacturer warranty.
WARRANTY DURATION: All materials and workmanship are warranted to the
original consumer purchaser for a period of ninety (90) days from the original
purchase date.
WARRANTY COVERAGE: This product is warranted against defective materials
or workmanship. This warranty is void if the product has been damaged by
accident, in shipment, unreasonable use, misuse, neglect, improper service,
commercial use, repairs by unauthorized personnel or other causes not arising
out of defects in materials or workmanship.
This warranty doesn’t cover the following which may be supplied with this
product, including but not limited to; LCD Screens, glass parts, lenses, bulbs
etc. This warranty is effective only if the product is purchased and operated
in USA and Canada,and does not extend to any units which have been used in
violation of written instructions furnished by manufacturer or to units which
have been altered or modified or, to damaged products or parts thereof which
have had the serial number removed, altered, defaced or rendered illegible.
WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties
expressed or implied and no representative or person is authorized to assume
for manufacturer any other liability in connection with the sale of our
products. There shall be no claims for defects or failure under any theory of
tort, contractor commercial law including but not limited to, negligence,
gross negligence, strict liability, breach of warranty and breach of contract.
Under no circumstances will Manufacturer’s / Distributor’s maximum liability
exceed the retail value of the product.
WARRANTY PERFORMANCE: During the above 90 day warranty period, a product
with a defect will be either repaired or replaced with a reconditioned
comparable model (at manufacturer’s option).
The repaired or replacement product will be in warranty for the balance of the
90 day warranty period and an additional one-month period. No charge will be
applicable for such repair or replacement.
SERVICE AND REPAIR: If service is required for this product, you should
first contact Midwest Trading Group Customer Service at info@miradinggroup.com
or by calling 1 866-815-4714, Monday to
Friday 10am to 6pm EST.
NOTE: Manufacturer cannot assume responsibility for loss or damage during
incoming shipment. As a precautionary measure, carefully package the product
for shipment, and insure it with the carrier. Be sure to enclose the following
details with the product: your full name, return address and daytime phone
number, a note describing the problem you experienced, a copy of your sales
receipt or other proof of purchase to determine warranty status. C.0.D.
shipments cannot be accepted.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>