Trust GXT 890 Primo Keyboard and Mouse User Manual
- June 13, 2024
- Trust
Table of Contents
Trust GXT 890 Primo Keyboard and Mouse
Software layout
| a | – USB Report Rate |
|---|---|
| B | – Backlight Settings |
| c | – Key Assignment |
| D | – Macro Manager |
| E | -Profiles |
| F | – Save/Load Settings |
| G | -Reset |
Installation
d- Open the internet browser and go to
www.trust.com/21808/driver.
b – Click the “Download EXE” button to download the software.
c – Click on the “Setup-GXT 890.exe” and follow the installation wizard.
d – Click on the “Trust GXT 890.exe” shortcut to start the software.
– You can now start to configure the keyboard.
USB Report rate
Adjusting USB Report Rate
a – Click on the checkbox to select the preferred USB report rate.
– Settings are automatically updated to the keyboard.
Backlight Settings
Adjusting RGB Backlight
a – Click on the checkbox to enter the backlight settings.
b – Select the preferred LED mode .
c – Move the sliders to adjust brightness and animation speed.
c – Select the preferred color or check the ‘colourful’ checkbox to
activate the auto-RGB mode*
Custom backlight mode
a – Select the ‘Custom Light’ mode.
b – Select light profile 1, 2, 3 or 4.
c – Select the preferred color and click the preferred key on the picture
of the keyboard. The backlight will be adjusted right away on the keyboard.
d – To disable the backlight of a key, first press the eraser symbol
before pressing on the specific illuminated key.**
.* Depending on the specific backlight modes, each has specific options
** Don’t forget to press the pencil icon again to exit the eraser mode for the
custom backlight mode to continue making your custom light profile.
Key Assignment
Key Assignment
a – Uncheck the ‘light’ checkbox to make changes to the key assignments.
b – Click on the key you wish to re-assign.
c – Click on ‘Single keys’, press on the preferred key to assign the selected
key.
d – Click on ‘Multimedia’, select the preferred command from the drop down
menu.
e – Click on ‘Macro Manager’ to add or adjust macro sequences. For more
information about macro sequences see 7.
f – Click on ‘OK’, then click on ‘Apply’ to save all changes you just made.
- You can reset the key function back to default by pressing the ‘Reset to default’ button in the top right corner of the Key Assignment pop-up screen.
Macro Settings
Create a Macro (Store a sequence of keys in the software)
a – Click on ‘Macro manager’.
b – Enter the name for your macro in the input field and press the +
symbol to add the macro.
c – Check a to record the delay between keystrokes b enter the required
macro repeats.
d – Click ‘Start Recording’ to start recording the macro. Enter your
preferred macro sequence. Click ‘Stop Recording’ to stop recording the macro.
e – Click on ‘OK’ to save the macro
Profile Settings
Select, Save or Load a profile
a – Select one of the 3 profiles.
b – Click on ‘EXPORT’ to save a keyboard profile, Click on ‘IMPORT’ to
load a keyboard profile.
c – Enter a name for the keyboard setup you want to save, or choose the
preferred profile to load.
d – Click on ‘Save’ to save the keyboard profile, click on ‘Open’ to load
the keyboard profile.
e – Click on ‘Apply’ → Your setup is now saved.
Restore default settings
a – Click on ‘Reset to Factory Defaults?’ to reset all profiles to factory default.
Frequently asked questions:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>