Sjpzwcrl Hero 12 Smart Wireless Remote Control User Guide
- June 13, 2024
- Sjpzwcrl
Table of Contents
Hero 12 Smart Wireless Remote Control
User Guide
Hero 12 Smart Wireless Remote Control
For HERO 11/10/9/8/MAX
Camera Remote Control
Wearing The Remote
The Basics
LCD Display
| Remote Control Battery
---|---
| Camera Battery
| Bluetooth
| Time Lapse
| Video
| Photo
| Recording Time/ Number of Videos/ Photos
Button
Shutter/Select Button
1 Short Press Shoot photo, turn on/off recording
3S Long Press Enter phone pairing mode, only photo function in phone
mode, Bluetooth name is “T-10”
Star Button
When in the three main modes “Video”, “Photo”, “Time-lapse”
3S Long Press Set the current main mode to “Quick mode”
1S Short Press Enter to the “Quick mode”
Mode Button [Power/Mode Switching]
2S Long Press 3S Long Press 1S Short Press
Power On Power Off Mode Switching
(After pairing, you can control the camera on and off)
Setting Button [Pairing, small mode switching
1 Short Press The camera switches among the sub-modes.
Pairing
Setting Button
3S Long Press The remote control enters pairing mode, and the Bluetooth
indicator flashes
Camera Settings Select Connections > Connected Devices > Remote Control.
Put the camera into pairing mode. Wait for a successful pairing message to
appear on the camera screen.
- If the pairing fails, select Reset Connection in the camera settings and repeat the process.
If the camera has already been paired, you don’t need to pair it again when
you connect the remote control next time, just make sure the wireless
connection of the camera has been turned on, and it will be connected
automatically after a few moments.
When the camera is not used for a long time, the wireless connection may be
turned off completely, so please unplug the camera battery and plug it back in
to activate the wireless connection.
Pair up to 5
-
Cameras mode
In the state of the first camera connected, long press the [pairing button 3 seconds remote control Bluetooth [indicator] flashing, you can connect the second camera and so on, the maximum number of connected 5 -
Status Display
The display status of the first camera connected -
Power On/Off
All the connected cameras can be controlled at the same time to [ 0 n/Shutdown]
Charging
Plug the charging cable into the charging slot. Connect the other end of the cable to a computer or other USB power source
Charging Time 2.5h
Usage Time 10h
Please keep the charging device away from metal objects to prevent fire caused
by short circuit.
• When charging, the screen lights up and the power indicator starts to work
Electricity Level
| Remaining Power | CAM Display | RC Display |
|---|---|---|
| 0~5 | Side Blinking | Side Always On |
| 5~24 | Side Always On | |
| 25~49 | 1/3 Power | 1/3 Power |
| 50~74 | 2/3 Power | 2/3 Power |
| 75~100 | Full Power | Full Power |
Disclaimer
Please read this Disclaimer carefully. Using this product means that you
acknowledge and accept the terms of this disclaimer. By using this product,
you hereby acknowledge and agree that you are solely responsible for your own
conduct when using this product and any consequences thereof. You agree tousle
this product only for proper and lawful purposes. You understand and agree
that Telesis Digital Ltd. (hereinafter referred to as ‘Telesis’) accepts no
liability for any and all misuse, consequences, damages, injuries, penalties,
or any otherlegal responsibility directly or indirectly incurred by your using
this product and associated accessories. Before every use, make sure that
your accessories are functioning properly. If there’s any damage or
irregularity, stop using them immediately. Within the scope of state laws and
regulations,Telesin reserves the right of final explanation and revision for
the commitment. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>