BIGASSFANS AirEye 30″ Wall Mount Fan Installation Guide
- June 5, 2024
- BIGASSFANS
Table of Contents
BIGASSFANS AirEye 30″ Wall Mount Fan
TECHNICAL SPECIFICATIONS
Fan Size
| ****
**Fan Weight***
| ****
Input Power
| ****
Max Amps
| ****
Max Power
---|---|---|---|---
| | ****
100–120 VAC, 1Ф, 50/60 Hz
| ****
5.1 A
| ****
386 W
20 in. (508 mm)| 32 lb (14.5 kg)| 200–240 VAC, 1Ф, 50/60 Hz| 3.1 A| 392 W
| | 277 VAC, 1Ф, 50/60 Hz| 3.1 A| 508 W
| | ****
100–120 VAC, 1Ф, 50/60 Hz
| ****
5.2 A
| ****
396 W
24 in. (610 mm)| 38 lb (17.2 kg)| 200–240 VAC, 1Ф, 50/60 Hz| 3.1 A| 400 W
| | 277 VAC, 1Ф, 50/60 Hz| 3.0 A| 501 W
| | ****
100–120 VAC, 1Ф, 50/60 Hz
| ****
5.0 A
| ****
384 W
30 in. (762 mm)| 45 lb (20.4 kg)| 200–240 VAC, 1Ф, 50/60 Hz| 3.0 A| 390 W
| | 277 VAC, 1Ф, 50/60 Hz| 3.1 A| 508 W
| | ****
110–120 VAC, 1Ф, 50/60 Hz
| ****
9.7 A
| ****
711 W
36 in. (914 mm)| 67.1 lb (30.4 kg)| 200–240 VAC, 1Ф, 50/60 Hz| 5.5 A| 669 W
| | 277 VAC, 1Ф, 50/60 Hz| 4.5 A| 716 W
PARTS AND HARDWARE
MOTOR
Make sure fan mount has been installed as specified in the mounting
instructions. To adjust motor angle, loosen main mounting bolt and angle
adjustment bolt.
HARMONICS FILTER (36 IN. [914 MM] FANS)
Select regions only. Install if included with your fan.
REAR GUARD
BLADE
ASSEMBLY
Ensure blade assembly is fully seated onto shoulder of shaft and set screws
are aligned to flats of shaft.
FRONT GUARD
If installing AirEye with Ion Technology, refer to the instructions that came
with the ion generator before installing the front guard.
Align Eyelets
Fasten
Hinge Pins
Start with topmost hinge.
SAFETY CABLE
Do not attach safety cable to fan mount under any circumstances.
HARMONICS FILTER (20, 24, AND 30 IN. [508, 610, AND 762 MM] FANS)
Select regions only. Install if included with your fan.
ELECTRICAL CONNECTIONS
ELECTRICAL CONNECTIONS: FAN WITH HARMONICS
FILTER
ELECTRICAL
CONNECTIONS: FAN WITH OCCUPANCY SENSOR* AND HARMONICS FILTER
POWER WIRING: 277 V FANS
Single Phase (L1 + L2 + PE) Single Phase (L1 + N + PE)