Iqonic IQ157 Electric Fluff Remover User Manual

: June 13, 2024
: iqonic

Table of Contents

INTRODUCTION
INTENDED USE
SAFETY INSTRUCTIONS
CONTENTS OF PACKAGE
PRODUCT FEATURES
TECHNICAL DATA
INSTRUCTIONS FOR USE
CLEANING AND CONTAINER EMPTYING
TROUBLESHOOTING
DISPOSAL AND RECYCLING
SERVICE AND WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Iqonic IQ157 Electric Fluff Remover User Manual

INTRODUCTION

Thank you for choosing one of our Iqonic products! Please read this entire manual carefully before use to avoid bodily injury and/or damage to the product. We cannot be held responsible for the consequences of a wrong or faulty installation if the instructions in this manual are not followed carefully. If you do not understand these directions, have any doubts about the safety of the installation, or have any other questions about the product, please contact us at info@brightinnovations.nl.

INTENDED USE

This electronic device is intended to remove lint from clothing, shoes, furniture and bedding made of textiles. The device is only suitable for use by adults. The product is not intended for use by children or people with physical or mental disabilities. This device is only suitable for indoor consumer use and not suitable for commercial use.

WARNING!

SAFETY INSTRUCTIONS

General

This appliance is only suitable for use on textiles and is not suitable for use on wool or down.
Hold both the device and the end of the USB cable to remove the USB cable from the device.
Before use, check whether the blades are deformed or damaged. Do not use the device if this is the case to avoid damage to textiles.
Do not insert fingers or metal objects into the blades. This may cause physical injury or damage to the device.
The blades are very sharp, keep this in mind when using the device or when replacing blades.
Only use the appliance when the blade head and the guard are correctly installed to avoid damage to clothing and/or personal injury.
Only switch on the device when all parts are correctly installed.
Replace the blades when the function of the device decreases. The blades have a service life of approximately 50 operational hours.
Turn off the device before removing the battery.
Only charge the device in temperatures between 5°C and 35℃ and never in direct sunlight or near other hot devices or lamps.

Persons

Use and store the device and the battery out of the reach of children.
This device is not suitable for children or for people with physical or mental disabilities.
The device is designed and intended for private use only. Do not use the device for commercial and industrial purposes.
Never touch the battery fluid when it is leaking. If a body part has been in contact with the liquid, rinse the body part immediately and contact the emergency services or your doctor.
Misuse of the device can result in personal injury and damage to the device.
Use the device only for the purposes specified in this user manual. If the device malfunctions, has been dropped or damaged, do not use the device and contact our customer service.

Storage and use

Use the device only with the specified wattage/ voltage/ampere.
Do not place objects filled with liquids such as vases, cups, etc. on, above or near the device (for example, on a shelf above the device).
Do not immerse any part of the device in water or other liquids.
If this device accidentally gets wet, please contact our customer service immediately. Do not touch the appliance and the power cord with wet or damp hands.
If this device does not operate normally – in particular – if it emits unusual noises or smells, do not use the device and contact our customer service.
To avoid electric shock, never touch the inside of this device. Only a qualified technician is allowed to open this device. Do not overload wall outlets, extension cords or adapters beyond their capacity as this may cause fire or electric shock.
Accumulated dust can cause electric shock, electric leakage, or fire due to the device emitting sparks and heat, or because the insulation deteriorates.
Do not disassemble the device. Do not repair or restore the device. This can damage the device.
The device should only be repaired by authorized service personnel
Do not drop or hit the product. If the product is damaged, unplug the power cord and contact our customer service.
Do not place this device near water or other liquids (near a bathtub, wash basin, kitchen sink or laundry tub, in a wet basement or near a swimming pool, etc.).
Do not use the appliance near kitchen countertops or humidifiers where it may be exposed to steam or oil.
Contact us for repairs to avoid damage and personal injury.

CONTENTS OF PACKAGE

Verify that the contents of the package match the below items. Notify the supplier if any parts are missing. If the device appears to be damaged, immediately file a complaint with the carrier and provide the supplier with a description of the damage.

Iqonic Lint Remover – Model IQ157 – EAN 8720865541006

Accessories

3 x Blade head
1 x Cleaning brush
1 x USB-C charging cable
1 x User Manual

PRODUCT FEATURES

Battery percentage 0-100%
Charging indicator
Speed indicator
On/Off & Speed button
USB-C charging port
Protection cover
Blade head
Blade base
Lint container
Main device
Cleaning brush
USB-C cable

TECHNICAL DATA

Dimensions: 18.2 x 7.4 x 11.3cm
Weight: 248g
Color: Black
Blade head: Siz blades
Material: ABS + electrical components
Nominal voltage: 3.7V
Nominal power: 5W
Input voltage: 5V – 1A
Connection: USB-C
Battery type: Lithium-ion
Battery capacity: 2000mAh
Working time: 2 – 3 hours
Display type: LED
Automatic shut down: No
Charging time: 3 hours
Working temperature: -10℃~45℃
Storage temperature: -10℃~45℃

INSTRUCTIONS FOR USE

Fully charge the device before the first use. The battery indicator is lit red when the battery is charging and lit green when the battery is fully charged.
Assemble the device completely.
Place the object to be depilated on a flat surface.
Switch on the device with the “M” button and select the desired speed: MI (6000 rpm), MII (7000 rpm) or MIII (8000 rpm).
Move the device over the object to be depilated to remove the lint.

CLEANING AND CONTAINER EMPTYING

Open the protective cover
Remove the protective cap
Clean with the brush
Remove the lint container
Empty the lint container

TROUBLESHOOTING

The device is not working Check if:
- the protective cover is installed correctly
- the device is fully charged
- there are no foreign objects present in the blade head
The device does not charge
Check that the USB cable is properly connected and that the charging indicator is lit

DISPOSAL AND RECYCLING

ACCORDING TO EU 2012/19/EU

Do not dispose of the device in the normal household waste. Take the device to a collection point designated by the government to prevent potential negative consequences for the environment and human health.