Iqonic IQ156 Wireless Weather Station User Manual

Iqonic IQ156 Wireless Weather Station

Specifications

• Model : IQ156
• Intended Use: Display date/time, indoor and outdoor temperature and humidity information
• Suitable for: Adults for indoor use (except for the outdoor sensor), not suitable for children or individuals with physical or intellectual disabilities
• Not suitable for commercial use
• Color : White
• Material: ABS + electrical components
• Nominal Current: 3V
• Nominal Power: 10mW
• Input Voltage
• Battery: 2 x AAA batteries (for both the base station and outdoor sensor)
• Automatic Backlight Shutdown: After 15 seconds
• Operating Temperature: 0~50°C

Package Contents

• 1 x IQ156 Weather Station
• 1 x Outdoor Sensor
• 1 x User Manual

Base Station

• Large LCD display showing date, time, indoor and outdoor temperature, and humidity
• Indoor temperature and humidity measurement
• Outdoor temperature and humidity measurement via the included outdoor sensor
• Indoor comfort level indicator
• Temperature and humidity trend indicators
• Alarm clock with snooze function
• Calendar with day of the week display
• 12H/24H time format selection
• Wall-mountable with hanging loop
• Buttons for adjusting values, calibration, and setting
• Battery compartment

Outdoor Sensor

• Red indicator light
• Hanging loop
• Battery compartment

Battery Installation

1. Open the battery compartment of both the base station and the outdoor sensor.
2. Insert 2 x AAA batteries into each compartment.
3. Close the battery compartments.

Placement of Base Station and Outdoor Sensor

1. Place the base station at the desired location.
2. Place the outdoor sensor within 60 meters of the base station, without any obstacles. If there are obstacles, place the outdoor sensor closer to the base station.

Connecting the Base Station with Outdoor Sensor

1. Insert batteries into the outdoor sensor.
2. Insert batteries into the base station.
3. After inserting batteries into the base station, the icon on the base station will blink for 3 minutes.
4. Wait a few minutes or press the [-] button on the base station. When the icon stops blinking and the outdoor temperature and humidity are displayed, the connection is successful.

Resetting the Connection

1. Press and hold the [-] button on the base station until the icon appears.

2. Press and hold the [-] button on the base station again until
   the outdoor temperature and humidity from the outdoor sensor are no longer displayed. The connection is now reset.

3. Repeat the steps to restore the connection between the base station and the outdoor sensor. Note: If batteries are replaced or the connection is lost, repeat the above steps to restore the connection.

FAQ

• Q: Can this weather station be used outdoors?
  A: The base station is designed for indoor use, but the outdoor sensor can be placed outside within a range of 60 meters from the base station, as long as there are no obstacles in between.

• Q: What batteries are required for this weather station?
  A: This weather station requires 2 x AAA batteries for both the base station and the outdoor sensor.

• Q: How do I change the time format from 12-hour to 24-hour?
  A: Press the corresponding button on the base station to toggle between the 12-hour and 24-hour time format.

INTRODUCTION

Thank you for choosing one of our Iqonic products! Please read this entire manual carefully before use to avoid bodily injury and/or damage to the product. We cannot be held responsible for the consequences of a wrong or faulty installation if the instructions in this manual are not followed carefully. If you do not understand these directions, have any doubts about the safety of the installation, or have any other questions about the product, please contact us at service@brightinnovations.nl.

INTENDED USE

This electronic device is intended to display the date/time, indoor/outdoor temperature and indoor/outdoor humidity information. The device is only suitable for use by adults. The product is not intended for use by children or people with physical or mental disabilities. The device is only suitable for indoor use (excluding the outdoor sensor) by consumers and is not suitable for commercial use.

WARNING!

SAFETY INSTRUCTIONS

GENERAL

• Keep the packaging material away from children and pets. They can suffocate in the packaging material.
• The base station is only suitable for indoor use.
• Place the base station in a well-ventilated location, away from ventilation grilles and never in direct sunlight or near other hot appliances or lamps.
• Place the outdoor sensor in a dry place under a roof and never in direct sunlight.
• Do not insert fingers or objects into open parts of the device. This may cause physical injury or damage to the device.

PERSONS

• Use and store the device out of the reach of children.
• This device is not suitable for children or for people with physical or mental disabilities.
• The device is designed and intended for private use only. Do not use the device for commercial and industrial purposes.
• Never touch the battery fluid when it is leaking. If a body part has come into contact with the liquid, rinse the body part immediately and contact the emergency services or your doctor.
• Misuse of the device can result in personal injury and damage to the device.
• Use the device only for the purposes specified in this user manual. If the device malfunctions, has been dropped or damaged, do not use the device and consult our customer service.

STORAGE AND USE

• Only use the device with the specified battery types.
• Do not place objects filled with liquids such as vases, cups, etc. on, above or near the device (for example, on a shelf above the device).
• Do not place this device near water or other liquids (near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool, etc.).
• Do not immerse any part of the device in water or other liquids.
• If this device accidentally gets wet, please contact our customer service immediately. Do not touch the device with wet or damp hands.
• If this device does not operate normally – especially if it emits unusual noises or smells – do not use the device and contact our customer service.
• Regularly check whether the product has any damage or wear. If so, do not use the device and have the device repaired by authorized service personnel.
• Do not use the appliance near kitchen countertops or humidifiers where it may be exposed to steam or oil.
• Do not disassemble the device. Do not repair or restore the device. This can damage the device. The device should only be repaired by authorized service personnel. Contact us for repairs to avoid damage and personal injury.
• Accumulated dust can cause electric shock, electric leakage, or fire due to the device emitting sparks and heat, or because the insulation deteriorates.
• Do not drop or hit the product. If the product is damaged, please contact our customer service.

CONTENTS OF PACKAGE

The contents of the package consist of the following components:

• 1 x Iqonic Weather Station
• 1 x Outdoor sensor
• 1 x User Manual

PRODUCT FEATURES

BASE STATION

1. Outdoor temperature and humidity
2. Indoor temperature and humidity
3. Comfort level (DRY/COMFORT/WET)
4. Date
5. Time
6. Background light activation
7. Change temperature scale (ºC/ºF). Delete MAX/MIN values of temperature and humidity
8. Change time format (12H/24H)
9. Wall hanging loop
10. Min (decrease value)
11. Plus (increase value)
12. Stand
13. Battery compartment
14. Calibration temperature and humidity

OUTDOOR SENSOR

1. Red indicator light
2. Hanging loop
3. Battery compartment

TECHNICAL DATA

BATTERY INSTALLATION

1. Open the battery cover of the base station and the outdoor sensor.
2. Place 2 x AAA batteries in each compartment.
3. Close the battery cover.

BATTERY NOTIFICATIONS

CONNECTING

THE OUTDOOR SENSOR

PLACEMENT OF BASE STATION AND OUTDOOR SENSOR

1. Place the base station in the desired location.
2. Place the outdoor sensor within 60 meters of the base station when there are no obstacles between the base station and the outdoor sensor. Move the outdoor sensor closer to the base station when obstacles are present.

CONNECT BASE STATION WITH OUTDOOR SENSOR

Insert the batteries in the outdoor sensor before you insert the batteries in the base station.

1. Insert the batteries in the outdoor sensor.
2. Insert the batteries in the base station.
3.  After the batteries have been placed in the base station, the icon will flash for 3 minutes. Wait a few minutes or press the [-] button on the base station. When the icon stops flashing and the outdoor temperature and humidity are displayed, the connection is successful.

RESET CONNECTION

1. Press and hold the [-] button on the base station until the icon appears.
2. Press and hold the [-] button on the base station again until the outdoor temperature and humidity of the outdoor sensor display “ —–” . The connection is now removed.
3. Repeat the steps to restore the connection between the base station and the outdoor sensor.

Note: if the batteries are changed or the connection is lost, repeat the steps above to restore the connection.

INSTRUCTIONS FOR USE

BACKGROUND LIGHT
Press the button to activate the backlight. The backlight turns off automatically after 15 seconds.

TEMPERATURE AND HUMIDITY TREND

1. Indicates that the temperature and humidity are increasing
2. Indicates that the temperature and humidity are stable
3. Indicates that the temperature and humidity are decreasing

℃/ºF CONVERSION

1. In normal mode, short press the [ºF/℃] button to switch between Celsius/Fahrenheit.
2. Briefly press the [-] button to display the current maximum and minimum values of the temperature and humidity on the screen.
3. In normal modes, long press the [ºF/℃] button to delete the maximum and minimum values of temperature and humidity.

DATE AND TIME SETTING

1. Hold down the button until the year starts flashing. Then release the button and press the [+] or [-] button to change the year.
2. Press the button once to set the month. Press the [+] or [-] button to change the month.
3. Press the  button once to set the day. Press the [+] or [-] button to change the day.
4. Press the
5. button once to set the hours. Press the [+] or [-] button to change the hours.
6. Press the button once to set the minutes. Press the [+] or [-] button to change the minutes.
7. Wait for 15 seconds after the settings are done. The weather station automatically saves the set values and returns to the date/time display.

12H/24H SETTING

1. Press the button to toggle between 12H/24H timeformat. When the 12H time format is selected the display will show AM or PM.

COMFORT LEVEL

MIN AND MAX VALUES

1. Press the [-] button to display the highest measured indoor and outdoor values. The display shows MAX.
2. Press the [-] button again to display the lowest measured indoor and outdoor values. The display shows MIN.

CALIBRATION

Use calibration to match temperature and humidity values with other devices or when placement or weather conditions call for calibration of the values. Calibration can increase accuracy.

1. Press the [+] and [-] button simultaneously until the temperature values start flashing. Release the buttons. Press the [+] or [-] button to increase or decrease the values. (Max 5ºC, Max 41ºF).
2. Press and hold the [ºF/℃] button until the humidity readings start flashing. Press the [+] or [-] button to increase or decrease the values. (Max 10%).
3. Press the [ºF/℃] button to save the settings.

Note: when the batteries are replaced the calibration is cleared. Recalibrate after replacing the batteries.

TROUBLESHOOTING

There is no connection to the outdoor sensor

Try the following solutions

1. Long press the button on the base station until the icon flashes.
2. Move the base station and the outdoor sensor until a connection is established.
3. Signals from other electronic devices can interfere with the connection. Place the base station and the outdoor sensor out of reach of other devices.

It is possible to calibrate temperature and humidity values. Follow the calibration steps to adjust values.
It is possible to calibrate temperature and humidity values. Follow the calibration steps to adjust values

DISPOSAL AND RECYCLING

ACCORDING TO EU 2012/19/EU
Do not dispose of the device in the normal household waste. Take the device to a collection point designated by the government to prevent potential negative consequences for the environment and human health.

SERVICE AND WARRANTY

If you encounter a problem with your product, please contact our customer service via service@brightinnovations.nl

Bright Innovations B.V.
Amandelstraat 33
2564EV Den Haag
Netherlands
12/2023 – v1.3

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>