Eureka NEU700 Innova Multi Cyclone Upright Vacuum Owner’s Manual

Eureka NEU700 Innova Multi Cyclone Upright Vacuum

Product Information

Product: Midea Vacuum Cleaner

Model: V18P01FP25NA TYPE

Date: December, 2020

Warning: This document is published for after-sales service purposes only. The content is subject to change without prior notice. For user safety, the appliance should be restored to its original condition and only identical parts should be used.

Product Usage Instructions

1. Operation Methods:
   • Align the metal tube set with the electric brush and insert it until you hear a click sound.
   • Align the body set with the metal tube and insert it until you hear a click sound.
2. Maintenance:
   • Tool & Measure Instrument:
   1. Wrench
   2. Hexagon Bar Wrench
   3. Multi-meter
   • Assembly & Disassembly:
   1. Check of Motor:
   • Check if the motor can work well with no rust on its surface.
   2. Assembly of Motor:
   • Install the seal ring on the motor assembly.
   • Install the inlet grid on the motor assembly.
   • Combine the motor assembly and the body assembly.
   • Install the combination inside the body assembly.
   3. Assembly of PCB:
   • Install the PCB into the battery body.
   • Insert the terminals onto the PCB.
   • Close the top body and button body together, install 4 screws.
   4. Assembly Machine Body:
   • Install the battery pack.
   • Install the dust cup assembly.
   • Error Code & Trouble Shooting:
   1. EC01: Vacuum Cleaner Cannot Work
   • The power source is abnormal. Change power source.
   • The circuit connection is loose or short circuit. Tighten the connection or change the wire.
   • The On/Off button cannot work. Replace with a new On/Off button.

WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public .

It does not contain warning or cautions to advise non-technical individuals of potential dangers in attempting to service a product Products powered by electricity should be serviced or repaired only by experienced professional technicians .Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death. There are special components used in this equipment which are important for safety These parts are used by Schematic Diagrams ,Circuit Board Diagrams ,Exploded Views and Spare parts list .It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock ‚fire or other hazards .Do not modify the original design without permission of manufacturer.

PRODUCT

1. Model
2. Operation Methods

1. Align metal tube set with the electric brush, and insert it until you hear a “click” sound.
2. Align body set with t metal tube, and insert it until you hear a “click” sound.

Note: Different models may have different methods of assemble, please refer to the instruction manual for specific models.

System Diagram

Components

1. Power Button
2. 2-stage Power Adjustment Button
3. cup Release Button
4. Dust Cup
5. Release Button for Dust Empty
6. Release Button for metal tube
7. Metal tube
8. Release Button for Brush
9. Electrical Brush
10. Release Button for battery pack

Note: Different models have different components, please refer to the instruction manual for specific models.

Maintenance

2.1 Tool & Measure Instrument

2.2 Assembly & Disassembly

Check of Motor

1. Check the motor can work well with no rust on its surface.

Assembly of Motor

1. Install the seal ring on the motor assembly.
2. Install inlet grid on the motor assembly.
3. Combine the motor assembly and the body assembly.
4. Install the combination inside the body assembly.

Assembly of PCB

1. Install the PCB into the battery body .
2. Insert the terminals onto the PCB.
3. Close the top body and button body together,install 4 screws.

Assembly Machine Body

1. Install the battery pack
2. Install the dust cup assembly

Error Code & Trouble Shooting

EC01: Vacuum Cleaner Cannot Work

EC02: Start Directly after Plugging in

EC03: Low Suction Pressure

EC04: Smoky Motor

EC05: Dust Leakage

Note: All maintenance should be done by professional engineers.

ATTACHED FILES LIST

1. Exploded View
2. Spare Parts List
3. Wiring Diagram

Note: The manual may update without prior notice. Please download the latest version on website: https://tsp.midea.com.

References

• index

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>