NAC SCALE 30kg Electronic Digital Scale User Manual
- June 13, 2024
- NAC SCALE
Table of Contents
Electronic Digital Scale
Operation Manual
30kg Electronic Digital Scale
Features
With high-performance micro-controllers and high-resolution sensors, the scales’ weighing is quick and precise. They are widely used in industrial packing, warehouse operations and other business activities for their high reliability, easy operation, low energy consumption and long-term service.
Technical specifications
– Work temperature: 0~40 ℃
– Environmental humidity: <90%
– 5 digits LCD display.
– Weighing pan dimension: 235x178mm
– Power supply: AC220V/DC6V adaptor or two 1.5V batteries
Product specifications
| Model | Unit | Max. weight | Min. weight | Graduation | LCD backlight |
|---|---|---|---|---|---|
| NACS06 | Kilogram | 6 kg | 10 g | 2 g | Yes |
| Pound | 16 lb | 0.32 oz | 0.6 oz |
Keys’ functions
– ON/TARE: Press the key to power on the scale and start up weighing
process. For tare operation, press the key again to clear the display and
reset weight indication to zero.
– OFF: Press the key to power off the scale.
– MODE: 1) Weighing units exchange key. Press the key to select lb and kg
sequentially while it is unlocked.
2) Hold “MODE” for 8 seconds to lock (‘off’) and unlock (‘on’) MODE key.
Startup
– Adjust 4 bottom screws to achieve a good level and make sure scale on flat.
– Plug the power core or install the batteries, press ‘ON/TARE’ key to start
the scale, wait until ‘8.8.8.8.8.’ appear on LCD for scale self-test. Then LCD
displays zero and is ready for weighing operation.
– Put the weight on the weighing pan, the LCD digits will indicate the
weighing value of the weight.
Warnings
– If you use the batteries for power supply, you must replace batteries when
LCD flickers “ Lo”.
– The scale will cut off the power if on standby for 8 minutes.
– Keep the scale clean to ensure the normal working.
– Take the batteries out if not operate for a long time.
– The scales are either battery or Mains operated. Please ensure you do not
use both battery and Mains power at the same time.
– Always keep the scale dry and cover after use. The scale can be cleaned with
a soft cloth and mild detergent.
– Keep the scale away from direct sunlight, heat, flame and high humidity.
Error Code:
– When LCD showing –H– on the scale.
– Reason 1. Overloading
– Solution: Remove that item and restart.
– Reason 2. Load cell broken
– If LCD always show –H– even that is nothing on scale, that means load cell
broken
– Solution: change load cell and do calibration again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>