LAST FACTORY Tape Preservative 480 ml Instructions
- June 13, 2024
- LAST FACTORY
Table of Contents
LAST FACTORY Tape Preservative 480 ml Instructions
Open LAST® Tape Preservative bottle and fill large pipette as shown.
Apply Tape Preservative to swab. Recap bottle tightly. This is sufficient treatment for 1800 feet of ¼” wide tape.
Gently press the swab against the oxide side of the tape. Engage fast wind or rewind.
Note: for tapes longer than 1800 feet, alternate use of prepared applicators at 1800-foot intervals.
Affix a LAST® Dot Sticker to tape storage box to show treatment.
Clean LAST® swabs by saturating in alcohol, then gently squeeze and rub while blotting to remove tape contamination.
Let dry thoroughly before reusing.
Keep LAST® products out of the reach of children
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>