SUNJOE SWD2500-RM 7 AMP Electric Wet/Dry Vacuum User Manual

SUNJOE SWD2500-RM 7 AMP Electric Wet/Dry Vacuum User Manual

IMPORTANT!

Safety Instructions

All Operators Must Read These Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly. Some of the safety precautions given in this manual apply generally to many appliances. Other warnings are specific to the use of this electric wet/dry vacuum.

Always follow these safety guidelines. Failure to do so may result in personal injury or property damage.

WARNING! This unit can be dangerous! Careless or improper use can cause serious injury.

General Safety

FOR HOUSEHOLD USE ONLY

Before using, be sure that everyone using this tool reads and understands all safety instructions and other information contained in this manual. Save this manual and review it frequently prior to using this tool and when instructing others on the proper operating procedures.

**CAUTION**! Wear appropriate hearing protection during use. After long periods of extended use, the noise generated from this appliance may cause hearing loss if your ears are not properly protected.

**WARNING**! To reduce the risk of injury, inspect the filters frequently and replace with recommended replacement if there are signs of wear or deterioration.

Before using the wet/dry vacuum, take the time to familiarize yourself with the controls, especially how to stop the wet/dry vacuum in an emergency. The only individuals who should use the wet/dry vacuum are those who have a thorough understanding of the instructions and who know how to operate the machine. Children should never be allowed access to the wet/dry vacuum.

Retain this manual for future reference.

1. Keep filters in place – Ensure that the equipment is assembled correctly and the filters are in the correct position.

2. Keep bystanders and children away – All bystanders, including children and pets, should be kept a safe distance away from the work area.

3. Disconnect tool – Disconnect the wet/dry vacuum from the power supply when not in use, before servicing, when transporting, or when changing accessories.

4. Do not use in dangerous environments – Do not use the wet/dry vacuum in rain, damp or wet locations. Do not operate the wet/dry vacuum in gaseous or explosive atmospheres or use the wet/dry vacuum to pick up flammable or combustible liquids. Motors in these tools normally spark, and the sparks might ignite fumes.

5. Check for damaged parts – Before using the wet/dry vacuum, repair or replace any part that is damaged. In addition, check for alignment of moving parts, binding of moving parts, breakage of parts, and any other conditions that may affect the tool’s operation. Inspect the appliance cord periodically. If damage is found, have it repaired by an authorized service facility. Extension cords should also be inspected periodically and immediately replaced if damaged.

6. Avoid unintentional starting – Make sure the switch is off before plugging in the appliance.

7. Use the right tool – Do not force the tool or any attachment on the tool to do a job for which they were not designed.

8. Wear face or dust masks – If operated in dusty environment, the use of a face or dust mask specially designed to filter out microscopic particles is recommended.

9. Maintain tools with care – Keep tools clean for best and safest performance. Follow instructions for changing accessories. If the appliance is not working as it should, or has been dropped, damaged, left outdoors, dropped into water, please call Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).

10. Use recommended accessories – Consult the owner’s manual for recommended accessories. The use of improper accessories may cause risk of injury.

11. Do not abuse the cord – Never carry the appliance by its cord or yank it to disconnect it from the receptacle.
    Keep the cord away from heat, oil, and sharp edges.

12. Do not force the appliance – It will do the job better and with less likelihood of a risk of injury if it is used at the rate for which it was designed.

13. Do not overreach – Keep proper footing and balance at all times.

14. Store idle tool indoors – When not in use, the wet/dry vacuum should be stored indoors in a dry and locked-up place out of the reach of children.

15. Stay alert – Watch what you are doing. Use common sense. Do not operate the wet/dry vacuum when you are tired or under the influence of drugs, alcohol or other medication.

DANGER! Do not manually place objects into the vacuum inlet while operating the unit, as this can seriously damage the unit and/or harm the operator. Keep both hands away from the air inlet while the power is on.

DO NOT ATTEMPT to remove material or hold material to be vacuumed when the wet/dry vacuum is on. Make sure the wet/ dry vacuum is off when clearing jammed material from the vacuum inlet.

Personal Safety

DANGER! Do not vacuum, or use this wet/dry vacuum near flammable liquids, gases, or explosive vapors like gasoline or other fuels, light fluids, cleaners, oil-based paints, natural gas, hydrogen, or explosive dusts like coal dust, magnesium dust, grain dust or gun power. Sparks generated by the motor can ignite flammable vapors or dust.

• This vacuum is only for indoor use. Do not use it outdoors.
• Children in the work area must be supervised to ensure that they do not play with the appliance. This appliance is NOT a toy and should never be used as such.
• Never leave a machine that is ready for operation unattended at the workplace.
• Do not use the tool with a damaged plug. If the tool is not working as it should or has been dropped, damaged, left outdoors or dropped into water, contact the Snow Joe® + Sun Joe® customer service department at 1-866-SNOWJOE (1-866-766-9563).
• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
• Do not use without the power head and/or filters in place.
• Carefully inspect your appliance prior to use and follow all label and marking instructions.
• Always unplug this appliance before assemble or disassemble the filter.
• Do not handle plug or the unit with wet hands.
• To reduce the risk of health hazard from vapors or dust, do not vacuum toxic material.
• Do not store near hazardous material.
• Do not leave the wet/dry vacuum unattended when plugged in. Unplug from the power source when not in use.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings.
• Maintain proper footing and use extra care when using the appliance on stairs.
• Service on the product must be performed by qualified repair personnel only. Service or maintenance performed by unqualified personnel could result in injury to the user or damage to the product.
• This wet/dry vacuum is intended for residential use only. Commercial use of this product is prohibited and will void the manufacturer’s warranty.
• Never douse or squirt the unit with water or any other liquid. Clean the unit after use every time as described in the cleaning and storage section.
• Prevent cords, plastic bags, or similar items from getting sucked in, as these might wrap around the filter, which may cause an overload or blocking of the motor. In such a case, switch the wet/dry vacuum off. Do not leave the wet/dry vacuum switched on with the motor overloaded or stalled.
• Always operate the machine in an upright position. Do not operate it tilted to one side or even upside-down.

Electrical Safety

1. Ground fault circuit interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for this electric wet/dry vacuum. Receptacles are available having built-in GFCI protection and may be used for this measure of safety.

2. Make sure that the mains voltage matches that listed on the unit’s rating label. Using the improper voltage can damage the motor and injure the user.

3. To prevent electric shock, use only with an extension cord suitable for indoor use only, such as SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.
   Before use, check that the extension cord is in good condition. When using an extension cord, make sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
   

4. To reduce the risk of electric shock, this appliance has a polarized plug (i.e. one blade is wider than the other). Use this appliance only with a polarized UL-, CSA- or ETLlisted extension cord recommended for indoor use only. The appliance plug will fit into a polarized extension cord only one way. If the appliance plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. The extension cord plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not modify the appliance plug, extension cord receptacle or extension cord plug in any way.

5. To prevent the appliance cord from disconnecting from the extension cord during operation, make a knot with the two cords as shown in Table 1. Table 1. Method of Securing Extension Cord

6. Do not abuse the cord. Never pull the wet/dry vacuum by the cord or yank the cord to disconnect it from the receptacle. Keep the cord away from heat, oil and sharp edges.

Double-Insulated Appliances

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double insulated appliance requires extreme care and knowledge of the system, and should be performed only by qualified service personnel at an authorized Snow Joe® + Sun Joe® dealer. Replacement parts for a double- insulated appliance must be identical to the parts they replace. A double- insulated appliance is marked with the words “Double Insulation” or “Double Insulated.” The symbol (square within a square) may also be marked on the appliance.

DOUBLE-INSULATED: GROUNDING NOT REQUIRED. WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS.

This electric wet/dry vacuum is double-insulated, eliminating the need for a separate grounding system. Use only identical replacement parts. Read the instructions before servicing double-insulated appliances. Use this wet/dry vacuum only as described in this manual.

Specific Safety Rules for Wet/Dry Vacuum

This motor-operated wet/dry vacuum is intended for vacuuming wet or dry material and dust. This equipment is not suitable for vacuuming ashes, coals, toxic, flammable or other hazardous materials. Vacuuming of glowing materials and dusts that are combustible, explosive or hazardous to one’s health is prohibited. The manufacturer will not be held responsible for injuries resulting from incorrect use of the device or from use that does not comply with the directions.

NOTE : This wet/dry vacuum is intended for indoor household use only.

WARNING! To reduce the risk of electric shock, do not use outdoors or in damp or wet environments. Do not expose to rain. Store indoors in a dry place.

WARNING! For your own safety, read and understand the operator’s manual. Do not run the unit unattended. Do not pick up hot ashes, coals, toxic substances, flammable materials or other hazardous debris. Do not use the device in an area with explosive liquids or vapors.

CAUTION! To reduce the risk of injury, unplug the unit before servicing.

• Do not use the wet/dry vacuum without filters in place.
• When vacuuming, do not place the equipment on heat sensitive floors. For safety reasons, use a fireproof base when necessary.
• Empty and clean the vacuum before and after vacuuming to avoid the accumulation of debris.

CAUTION! Do not vacuum hazardous substances (e.g. petrol, solvents, acids or lyes) and ash from unauthorized fuels (i.e. from oil-burning ovens or heating boilers). These substances pose a serious risk of injury.

• Do not use the vacuum in areas where flammable or combustible liquids, such as gasoline, may be present.
• Do not vacuum fine, combustible dust particles that can ignite and potentially lead to an explosion.
• Do not put foreign objects into openings. Do not use the vacuum with any opening blocked; keep all openings free of dust, lint, hair, and anything that may reduce air flow.
• Always check the hose and the unit when vacuuming.

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate.

Know Your Electric Wet/Dry Vacuum

Read the owner’s manual and safety instructions carefully before operating the electric wet/dry vacuum. Compare the illustration below to the electric wet/dry vacuum in order to familiarize yourself with the location of the various controls and adjustments.
Save this manual for future reference.

1. Cloth filter
2. Foam filter
3. Appliance cord
4. Filter cage
5. Handle
6. Power head
7. On/Off switch
8. Vacuum hose
9. Filter locking ring
10. Lid locks (2)
11. Air inlet/hose connector
12. Dust tank
13. Trolley wheels (4)
14. Extension tubes (3)
15. Floor brush
16. Crevice brush
17. Dust brush

Technical Data

Unpacking

Carton Contents

• Electric wet/dry vacuum
• Trolley wheels (4)
• Vacuum hose
• Extension tubes (3)
• Floor brush
• Crevice brush
• Dust brush
• Manual + Registration card

1. Carefully remove the electric wet/dry vacuum and check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).
   NOTE: Do not discard the shipping carton and packaging material until you are ready to use the wet/dry vacuum. The packaging is made of recyclable materials. Properly dispose of these materials in accordance with local regulations.

IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. These items can be swallowed and pose a suffocation risk!

Assembly

WARNING! To avoid serious personal injury, read and understand all safety instructions provided.
WARNING! Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
WARNING! Before performing any maintenance, make sure the tool is unplugged from the power supply. Failure to heed this warning could result in serious personal injury.
WARNING! To prevent personal injury, make sure the switch is in the OFF position before attaching or removing the vacuum hose.

1. Release the power head by grabbing the two lid locks and pulling outside to unlock. Then remove the power head (Fig. 1). All accessories and wheels are stored inside the dust tank.
   

2. Turn the dust tank upside down, and insert the 4 trolley wheels into the holes on the bottom of the dust tank. Press the wheels down firmly to secure (Fig. 2).
   

3. Insert the vacuum hose in the air inlet/hose connector, and push firmly to secure (Fig. 3).
   

4. Three extension tubes are equipped with the unit. If needed, insert the first extension tube into the vacuum hose end, and press firmly to lock. Follow the same instruction to assemble the second and third extension tubes (Fig. 4).
   

5. Select desired attachment, connect it with the end of the extension tube, press firmly to lock securely. Your wet/dry vacuum is ready for use (Fig. 5).
   

Operation

WARNING! This equipment incorporates parts such as switches, motors or the like that tend to produce arcs or sparks that can cause an explosion. Do not pick up flammable, combustible, or hot materials. Do not use around explosive liquids or vapors, as electrical devices produce arcs or sparks which can cause a fire or explosion – do not use at filling stations or anywhere gasoline is stored or dispensed.

Starting + Stopping

Do not switch on the wet/dry vacuum until it has been completely assembled. Before switching on the unit, always check the power cord for signs of damage. Use only intact cords.

WARNING! Damaged cords pose a severe risk of injury. Replace damaged cords immediately

WARNING! Before switching on the wet/dry vacuum, make sure that it is not in contact with any foreign objects.

1. Make sure the filters are installed before starting.

2. Make sure the power head and the vacuum hose are installed properly and locked securely.

3. Install the desired brush attachment onto the end of the hose. Use the extension tubes if needed.

4. Check that the electrical supply voltage and frequency (Volt/Hz) correspond to those specified on the rating plate.
   Plug the power cord into the outlet (Fig. 6). If an extension cord is used, make a knot with the two cords as shown in Table 1.

5. To start the unit, press the ON/OFF switch on the ON(I) position (Fig. 7), as indicated.
   

6. To stop the unit, press down (O) on the ON/OFF switch, as indicated (Fig, 7).

Operating Tips

This electric wet/dry vacuum is designed to clean hard surfaces. It is only suitable for vacuuming wet or dry, light materials. The vacuuming of heavy materials such as metal, stones, branches, broken glass is expressly excluded.

WARNING! Use the wet/dry vacuum only in daylight or good artificial light.

• Make sure the power head is properly installed and secured when using. Make sure each lock is secured. Failure to properly secure the locks could cause the power head to release from the tank.
• Double check to make sure the filters are not broken or torn. Do not use filters that are broken or torn. Handle the filters carefully when removing and installing.
• To reduce the risk of hearing loss associated with sound level(s), hearing protection is required.
• Always direct the cord backwards, away from the unit.
• This unit is intended for indoor use only. Do not use this unit outdoors.
• Be extremely careful when working on slopes and stairs.
• Always move forward by walking. Never run.
• Clean up after using the wet/dry vacuum. Dispose of debris appropriately.
• Always use the handle for transporting the equipment.

WARNING! To avoid personal injury, wear ear protectors when operating this unit. Wear a face mask or dust mask in dusty locations.

Air Inlet

Never cover the air inlets. Keep them free from obstructions and debris. They must always remain clear for proper motor cooling.

WARNING! To avoid personal injury, do not wear loose fitting clothing or articles such as scarves, necklaces, chains, ties, etc., that could get drawn into the air inlet. To make sure long hair does not get drawn into the air inlet, tie back long hair.

Basic Vacuum Procedures

WARNING! Do not vacuum drywall dust, fireplace soot or ash with the unit. This is very fine dust which will not be captured by the filter and may cause damage to motor.

WARNING! The cloth filter is only for dry vacuum. Make sure the cloth filter is attached for dry cleaning, and DO NOT use the cloth filter when vacuuming liquid.

WARNING! The foam filter must be used for wet vacuuming, and make sure to clean the foam filter after wet vacuuming.

• Place the equipment on a level surface that is not heat sensitive.
• Always use the vacuum hose for vacuuming. Hold the vacuum hose at a distance of approximately 0.4 in. (1 cm) above the material to be vacuumed.

WARNING! When vacuuming large quantities of liquids, do not immerse the brush attachment completely in the liquid; leave a gap at the tip of the brush attachment opening to allow air inflow. The machine is fitted with a float valve that stops the suction action when the collection tank reaches its maximum capacity. You will notice a decrease in motor speed. When this happens, turn off the machine, disconnect from power supply, and drain the liquid into a suitable receptacle or drain. To continue vacuuming, refit the collection tank with the power head.

• To prevent overheating of the motor, stop the unit for one minute after every 15 minutes of using.
• Turn off and unplug the unit after vacuuming, before cleaning and maintenance. After wet vacuuming, empty the collection tank, clean and dry the inside and outside before storage.
• Empty the tank outside in order to avoid a mess.
• Clean or change the filters (see Maintenance section) if the suction performance deteriorates.

WARNING! Never remove the power head without first turning the power switch to the OFF (O) position and unplugging the unit from the main power source.

Releasing and Assembling the Power Head

WARNING! To prevent personal injury, make sure the switch is in the OFF position and the unit is unplugged before attaching or removing the power head.

1. To release the power head, grab the two lid locks and pull outside to unlock. Then remove the power head (Fig. 8).
   

2. To attach the power head, insert the tabs on each side of the collection tank into the lid lock slots, and push firmly to make sure the tabs are locked inside of the lid locks.
   NOTE : The power head must be attached any time the unit is being operated.

Maintenance

To order genuine replacement parts or accessories for the Sun Joe® SWD2500-RM electric wet/dry vacuum, please visit sunjoe.com or contact the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).

WARNING! Disconnect the power cord before performing any maintenance task.

If the power is still connected, the unit could be accidentally turned on while you are performing maintenance on it, which could result in personal injury

Cleaning The Dust Tank

Clean the equipment routinely after each use:

1. Take the unit outside to clean it to avoid creating a mess indoors.
2. Remove the power head and empty the dust tank.
   Clean the tank with water and allow it to dry completely

Cleaning the Cloth Filter

WARNING! To avoid serious personal injury, always turn the unit off and unplug it before cleaning or servicing.

The cloth filter included is made of high quality material designed to stop small dust particles. The filter should be used for dry pick-up only. If the dust filter is wet, it will clog quickly and be very difficult to clean. Handle the filter carefully when removing it for cleaning and replacing. Check the filters for tears or small holes, a small hole can let dust pass through and out of the cleaner. Do not use a filter with holes or tears, replace it immediately.

1. Switch off and unplug the unit.

2. Remove the power head from the collection tank.

3. With the removed power head in the upside down position, slide the filter locking ring up and remove it.
   Then carefully remove the cloth filter from the filter cage (Fig. 9).
   

4. Clean the cloth filter by gently tapping or brushing dirt off. Cleaning should not be done indoors in living areas.

5. If needed, use a mild soap and water solution to wash the cloth filter and rinse with clean water. Allow the wet filter to air dry for 24 hours before installing onto the filter cage.

Cleaning the Foam Filter

WARNING! The foam filter must be cleaned every time after wet vacuuming.

1. Switch off and unplug the unit.

2. Remove the power head from the collection tank.

3. With the removed power head in the upside down position, carefully remove the foam filter from the filter cage (Fig. 10).
   
   NOTE : The foam filter can be attached to the filter cage securely. The filter locking ring is not needed when only the foam filter is attached.

4. Use a mild soap and water solution to wash the foam filter and rinse with clean water. Allow the wet filter to air dry for 24 hours before installing onto the filter cage.

5. To assemble the filters, first fit the foam filter on the filter cage, then fit the cloth filter over the outside of the foam filter. Last, slide the filter locking ring down, and press (Fig. 11).
   

WARNING! The cloth filter must be installed before dry vacuuming again. To secure the cloth filter, the filter locking ring must be used when the cloth filter is attached.

Storage

1. Examine the electric wet/dry vacuum thoroughly for worn, loose or damaged parts. Should you need to repair or replace a part, contact an authorized Snow Joe® + Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance.
2. Examine the appliance cord thoroughly for signs of excess wear or damage. If it is worn or damaged, replace it immediately.
3. Store the wet/dry vacuum indoors in a clean, dry and locked location out of the reach of children and animals.

Service and Support

If your Sun Joe® SWD2500-RM electric wet/dry vacuum requires service or maintenance, please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).

Model and Serial Numbers

When contacting the company, reordering parts or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. Copy these numbers into the space provided below.

Troubleshooting

WARNING! Always unplug the power cord before performing any adjustments, maintenance or repairs to your electric wet/dry vacuum.

SNOW JOE® + SUN JOE® REFURBISHED GOODS WARRANTY

GENERAL CONDITIONS:

Snow Joe® + Sun Joe® operating under Snow Joe®, LLC warrants this refurbished product to the original purchaser for 90 days against defects in material or workmanship when used for normal residential purposes. If a replacement part or product is needed, it will be sent free of charge to the original purchaser except as noted below.

The duration of this warranty applies only if the product is put to personal use around the household. It is the owner’s responsibility
to correctly perform all maintenance and minor adjustments explained in the owner’s manual.

HOW TO OBTAIN YOUR REPLACEMENT PART OR PRODUCT:

To obtain a replacement part or product, please visit snowjoe.com/help or email us at help@snowjoe.com for instructions. Please be sure to register your unit beforehand to speed up this process. Certain products may require a serial number, typically found on the decal affixed to the housing or guard of your product. All products require a valid proof of purchase.

EXCLUSIONS:

• Wearing parts like belts, augers, chains and tines are not covered under this warranty. Wearing parts can be purchased at snowjoe.com or by calling 1-866-SNOWJOE (1-866-766-9563).
• Batteries are covered in full for 90-days from the date of purchase.

Snow Joe® + Sun Joe® may from time to time change the design of its products. Nothing contained in this warranty shall be construed
as obligating Snow Joe® + Sun Joe® to incorporate such design changes into previously manufactured products, nor shall such
changes be construed as an admission that previous designs were defective.

This warranty is intended to cover product defects only. Snow Joe®, LLC is not liable for indirect, incidental or consequential damages in connection with the use or misuse of the Snow Joe® + Sun Joe® products covered by this warranty. This warranty does not cover any cost or expense incurred by the purchaser in providing substitute equipment or service during reasonable periods of malfunction or non-use of this product while waiting for a replacement part or unit under this warranty. Some states do not allow exclusions of incidental or consequential damages so the above exclusions may not apply in all states. This warranty may give you specific legal rights in your state.

HOW TO REACH US:

We’re here to help Monday through Friday from 9AM to 7PM EST and Saturday and Sunday 9AM to 4PM. You can reach us at 1-866-SNOWJOE (1 866-766-9563), online at snowjoe/com, via email at help@snowjoe.com or tweet us @snowjoe.

EXPORTS:

Customers who have purchased Snow Joe® + Sun Joe® products exported from the United States and Canada should contact their Snow Joe® + Sun Joe® distributor (dealer) to obtain information applicable to your country, province or state. If for any reason, you are not satisfied with the distributor’s service, or if you have difficulty obtaining warranty information, contact your Snow Joe® + Sun Joe® seller. If in the event your efforts are unsatisfactory, please reach out to us directly.

sunjoe.com

References

• Snow Joe: America's #1 Leader In Cordless Equipment, Pressure Washers & Snow Throwers
• Customer Support | Snow Joe® | Sun Joe® | Aqua Joe®
• Snow Joe: America's #1 Leader In Cordless Equipment, Pressure Washers & Snow Throwers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>