TRAMFABRIEK Gear Puller Minitrains User Guide
- June 13, 2024
- TRAMFABRIEK
Table of Contents
Gear Puller instructions
Very useful, important and alternative tips on how to remove a worm
successfully and without damaging it can be found at: www.tramfabriek.co.uk
/worm-removal.html . Please
read that webpage before using this tool, to avoid damaging it! Especially
when you have to remove a Minitrix worm. For that, don’t use this tool. The
Minitrix worms are fixed so tightly, you will damage the tool. But the tool
will still be useful, so check the link above for how to.
More pin sizes available
The manufacturer of the gear puller does not supply a pin for removing items
from an 1.2 or 1.5 mm shaft, two popular sizes in the model train hobby. The
Tramfabriek has manufactured pins in the sizes 1.1 and 1.4 mm, perfect for
this job. Also available is a longer 0.9 mm pin. You can purchase this from:
www.tramfabriek.co.uk/tools.html
Tramfabriek, July 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>