moobox C363 Wireless Security Camera User Guide

moobox C363 Wireless Security Camera User Guide

FAQ

Q- How 10 turn on the camera?

A Press the button at the bottom of the camera for 3 seconds uniilyou see the green light on and hear the voice promt. Then release the bution

Q- How t0 tur offthe camera?

A Press the button at the bottom of the camera for 3 seconds uniil you see the red light on. Then release the button and you will hear the voice prompt.

Q- How to reset the camera?

A: Press the button at the bottom of the camera for about 10 seconds. untl you hear the voice prompt,

Q: Why the camera cannot connect to the WIFI?

A: Please ensure the camera has been lured on and the indicator light is flashing red and blue altemately. Please also make sure your WiFi network s a 2.4GHz wireless network

Packing List

• Wireless Camera

• Charging Cable

• Screw Pack

• Mount

• Quick Start Guide

Camera Guide

1. Indicator light
2. Spotlight (C303, C304, C363, C364)
3. Lens
4. Light Sensor
5. PIR motion sensor
6. Microphone
7. Infrared LEDs
8. Speaker
9. Screw moumt
10. USB charging port
11. Micro SD Slot ( c362, c363, c364
12. Button

Charge your camera battery

Fully charge your camera battery. Plug into a USB power source (5V) using the provided cable.

Download the APP

Piease scan the QR code or search “Home Guards’in Google Play Store or APP Store {0 download the APP.

Add your camera into APP

Enter into the App, sign up for a free account and log in. Go to the home page and Click the + icon o the top right comer, select your camera. Please follow the insiruction on the App interface o add your camera.

Product Spec

feet (5m)
Motion Detection| PIR, adjustable sensitivity,
detects up to 26 feet (8m)
Networking| 2.4GHz 802.11 b/g/n
Battery| 5200mAh rechargeable lithium battery
Charge Time to Full| 4 hrs
Operating Temperature| 14°F to 140°F (-10°C to 60°C)
Dimension| 3.5 x 2.4 x 2.2 in (90 x 60 x 56mm)
Weight| 7.8oz (221g)

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>