hama RC 45 Radio Controlled Alarm Clock Instruction Manual
- June 4, 2024
- Hama
Table of Contents
00186372
00186373
Radio Controlled Alarm Clock
Funkwecker
RC 45
Operating Instructions
Controls and Displays
-
light / snooze button
= activating the backlight (approx. 5 seconds) /stopping the alarm for 5 minutes -
button
= selection of the date, time, alarm time /switching between 12 and 24-hour format -
button
= selection of the date, time, alarm time /language selection / Temperature unit -
mode button
= setting the date, time, alarm -
wave button
-
the alarm on/off button
= set/disable the alarm -
Battery compartment
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- RC 45 radio-controlled alarm clock
- 2 x AAA batteries
- These operating instructions
Safety Instructions
- The product is intended for private, noncommercial use only.
- Protect the product from dirt, moisture, and overheating, and only use it in a dry environment.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not place the product near interference fields, metal frames, computers, TVs, etc. Electronic devices and window frames can negatively affect the product’s functionality.
- Do not drop the product and do not expose it to any major shocks.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not operate the product outside the power limits given in the specifications.
- Do not open the device or continue to operate it if it becomes damaged.
- Keep this product, like all electrical products, out of the reach of children!
- Use the item only in moderate climatic conditions.
Warning – Batteries
- When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
- Only use batteries (or rechargeable batteries) that match the specified type.
- Before you insert the batteries, clean the battery contacts and the polar contacts.
- Do not allow children to change batteries without supervision.
- Do not mix old and new batteries or batteries of a different type or make.
- Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
- Do not short-circuit batteries.
- Do not charge batteries.
- Do not throw batteries in a fire.
- Keep batteries out of the reach of children.
Warning – Batteries
- Never open, damage, or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
- Immediately remove and dispose of dead batteries from the product.
- Avoid storing, charging, or using the device in extreme temperatures and extremely low atmospheric pressure (for example, at high altitudes).
Getting Started
Open the battery compartment (7), remove the contact breaker and then close the battery compartment (7).
Operation
5.1 Automatic date/time setting using the DCF signal
- Once you have inserted the battery, the display is switched on, an acoustic signal sounds and the alarm clock automatically starts searching for a DCF signal. During the search, the radio symbol flashes. This process can take 7 to 5 minutes.
- When the wireless signal is received, the date and time are automatically set.
Display | Searching for the DCF signal |
---|---|
Flashing display | Active |
Constant display | Successful –the signal is being received |
No display | Error –signal search ended |
Weak signal reception |
Note – Automatic search
The clock automatically searches for the DCF signal five times per day to
ensure that the time is correct. If the search fails, it ends and is repeated
at the next clock hour. The radio symbol disappears.
- If the clock repeatedly fails to receive a signal, press the wave button (5) to manually start the search for the DCF signal. The radio symbol ****starts to flash.
- Press the wave button (5) to cancel the search procedure.
Note – Manual search
The manual search takes about 7 minutes. If the search fails, it ends and is
repeated at the next clock hour. The radio symbol disappears.
Note – Summertime
The clock automatically switches to summertime.
Note – Time zone
- The time zone is used if the DCF time signal is received in a country whose time zone does not correspond to German time.
- If the time shift is +1 hour, for example, you need to set the time zone to +1. This will automatically set the clock forward one hour.
5.2 Manually setting the time format, time, and date
- Press and hold the mode button (4) for approx. 3 seconds to start manually setting the time format, date, and time.
- Set the following information in the order listed:
- Time format (12-/24-hour), time zone, hour, minute, year, month, day, language (weekday)
- To select each value, press the button (2) or the button (3), and confirm each selection by pressing the mode button (4).
- If you do not make an entry for 30 seconds, the settings will automatically close.
Note – Input
Hold down the button (2) or the button (3) to select the values faster.
Note – Day of the week
For the weekday display, you can choose from the following languages: German
(GER), English (ENG), Italian (ITA), French (FRE), Dutch (DUT), Spanish (SPA),
and Danish (DAN).
5.3 Alarm settings and display
-
Press and hold the alarm on/off button (6) for approx. 3 seconds to open the alarm settings.
The hour’s display begins to flash. -
Press the button (2) or the button (3) to select the hours for the alarm time, and confirm your selection by pressing the alarm on/off button (6). The minute’s display begins to flash.
-
Repeat the process to set the minutes for the alarm time. Once you have confirmed your minute’s selection with the alarm on/off button (6), the alarm is set and shows in the display.
-
If the alarm is triggered, the alarm symbol will begin to flash and an alarm will sound.
-
Press the alarm on/off button (6) to stop the alarm. Otherwise, it will stop automatically after 2 minutes.
-
If you press the snooze/light button (1) during the alarm, the alarm is interrupted for 5 minutes and then goes off again. The alarm symbol flashes. Press any button to disable the snooze function. The same goes for the alarm signal. The alarm repeats every 24 hours.
5.4 Temperature indicator
Press the button (3) to switch between °C and °F for the temperature display.
5.5 Backlight
Press the snooze/light button (1) to light up the display for approx. 5
seconds.
Care and Maintenance
Only clean this product with a slightly moist, lint-free cloth, and do not use
aggressive cleaning agents.
Make sure that water does not get into the product.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
Technical Data
| RC 45 radio-controlled alarm clock
---|---
Power supply| 3.0 V 2 x AAA batteries
Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the radio equipment type [00186372, 00186373] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00186372, 00186373 -> Downloads.
Hama GmbH & Co KG
86652 Monheim / Germany
Service & Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>