INTERTEC KLLOM KL600 Series Instantaneous Warm Water Bidet User Manual

KLLOM KL600 Series Instantaneous Warm Water Bidet

KLLOM Bidet Manual KL600 Series

KLLOM is an instantaneous warm water bidet that uses direct water.
Since there is no hot water tank, there are no foreign substances and germs generated
from the hot water tank. It is clean and safe to use.

The safety precautions are for user safety and to prevent property
damage, so be sure to read and use it correctly.

• Quality is not guaranteed when used in regions with different rated voltages.
• The user manual includes the product warranty. Please keep it carefully so that it is not lost.
• The design and specifications of this product are subject to change without notice for quality improvement

Safety Precautions

Follow the instructions to avoid danger or property damage and to use the product correctly.
Cautions are divided into “Warning” and “Caution” and their meanings are as follows.

Warning

Do not disassemble, repair or
modify the product.
Only qualified service personnel should service product.

• It may cause fire or electric shock.
• P lease contact customer service for product repair.

Connect to a dedicated grounded outlet ( AC120V ) and use it.
Be sure to ground to prevent short circuit or electric shock.

• There is a risk of electric shock due to malfunction or short circuit.
• If you do not have a ground terminal, contact your electric company.

Be sure to unplug the power plug
from the outlet when cleaning
the bidet or removing it from
the toilet.

• It may cause electric shock.

WARNING FOR SAFETY

Do not spray water on the product
body or the power plug.
Do not use in humid places.

• It may cause fire or electric shock.

Do not touch the power plug with
wet hands.

• Unplugging or connecting
  the power plug with wet hands
  may cause electric shock or injury.

Do not use a damaged power cord, plug, or loose outlet.
Contact customer service for exchange.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
  in order to avoid a hazard.

• It may cause fire or electric shock.

Safety Precautions

If you use a toilet seat or a warm air dryer for a long time, there is a risk of low-temperature
burns. Please be especially careful when using it by children, people who cannot control
the temperature on their own, or those with sensitive skin.

Warning Caution for safety

Children, the elderly, and people who cannot sit on the toilet alone or stand up on the toilet
alone, etc., must be supervised by a guardian so that they do not fall over when using it.

Safety Precautions

Checks before installation

Please check whether the installation environment is possible first.
( image reference )

※ Since the length of the power cord is about 1.5 m,
an electrical outlet must be located near the toilet bowl
in the bathroom.
※ Special installation materials are required for special
toilets without a water tank.
(direct water type, fresh valve type).
※ If there is a problem with the installation environment,
please contact the place of purchase.

Safety Precautions

Marking

This marking shown on the product or its literature, indicates that
it should not be disposed with other household wastes at the end of
its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.

Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
This product should not be mixed with other commercial wastes
for disposal.

Remote control battery replacement

※ When the remote control Battery LED is lit, replace the batteries.

1. Remove the remote control from the holder and open the battery cover on the back of
   the remote control.

2. After assembling two AA type 1.5V batteries according to the + and – polarities, close the cover.
   (Be sure to check the polarity)

3. After confirming the location where the remote control will be attached, clean the wall
   at the location where it will be attached.

4. Remove the double-sided tape protective vinyl from the holder, attach the holder to the wall,
   and then insert the remote control into the holder.

※ We are not responsible for any damage caused by strong shocks (falls, etc.)
to the remote control or if it falls into the toilet due to negligence in maintenance.

Grounding Instructions

※ When using products for 120V (USA, etc.)

① This product has to be grounded. Provides an escape wire for leakage current to reduce the risk
of electric shock In the event of a short circuit. This product is equipped with a cord having a
grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
DANGER- Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to
either flat blade terminal. Consult with a licensed electrician if you have any concern about whether
the product is properly grounded.

② This product is for use on a normal 120V circuit and has a grounding plug that looks like the plug
illustrated in sketch A in Figure 1. A temporary adapter, which looks like the adapter illustrated in
sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if
a properly grounded outlet is not available. The temporary adapter should be plugged into a
properly grounded outlet (should be installed by a licensed electrician). The green colored wire
from the adapter must be connected to a permanent ground.
Whenever the adapter is used, it must be held in place by the screw.

IMPROPER GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK.
Electric wiring has to be done in accordance with all local codes, or in the absence
of local codes, with National Electrical Codes.

The use of an extension cord is not recommended or advised it is necessary to use an cord use only
extension a three-prong extension code (one to one, and a three slot bu n GFCI receptacle that will
accept the plug on this product. The marked rating of the extension code should be equal to or greater
than the electrical rating of the un (Oamp), Consult a licensed electrician you are not sure whether the
unit is preperly grounded.

REMARK
The use of an extension cord is not recommended or advised it is necessary to use an cord use only
extension a three-prong extension code (one to one, and a three slot bu n GFCI receptacle that will
accept the plug on this product. The marked rating of the extension code should be equal to or greater
than the electrical rating of the un (Oamp), Consult a licensed electrician you are not sure whether the
unit is preperly grounded.
Instruction and caution statements for cleaning, user maintenance, operations recommended by the
manufacturer, such as lubrication or nonlubrication, and a warning to the user that any other servicing
should be performed by an authorized service representative or that the product has no user
serviceable parts.

Structure and name of the product

※ Toilet hose is sold separately ac cording to the installation environment and consumer needs.
※ For purchase inquiries, please contact the seller.

How to install

Precautions before installation

Be sure to check the product and outlet voltage before installation. (Check AC120V)
If electrical work is required, consult a qualified electrical contractor ;
Be sure to ground the outlet to prevent short circuit or electric shock.
Never connect power until installation is complete.

Check the water supply valve in the bathroom

Check the water supply valve in the bathroom.
Parts other than accessories may need to be purchased separately.
Consult your dealer if necessary.

Installation Procedure

Connect the hose after checking whether there is a rubber packing on the hose
connection part.(Assembling without rubber packing may cause water leakage.)

Operation check and maintenance

1 Open the water supply valve so that water can be supplied to the bidet body.

• Check the piping connections for water leaks.
• If a leak is confirmed, close the water supply valve, repair the leaking part,
  and then install it again.

2 Insert the power plug into the outlet.

(1) When the power plug is inserted, the indicator light on the control panel display turns on and
the product prepares for operation with a “ding” sound.
(2) Touch the seat sensor sticker to activate the seat sensor.
(3) Press the “Rear” button on the remote control to check if the cleaning function works normally.
When the nozzle comes out, use your hand to prevent water from splashing around.
(4) After confirming that the water comes out, press the stop button to stop the operation.

When the product installation is complete,
plug in the power plug.

When checking the operation of the seat sensor,
make sure that water does not splash.

Maintenance

Mesh filter cleaning

• Regular cleaning of the mesh filter can prevent the water pressure
  from weakening.

• The mesh filter is located inside the static pressure valve of
  the bidet body.

• After closing the water supply valve, disconnect the bidet water supply
  hose connection and remove foreign substances from the mesh filter
  inside the static pressure valve.

Water filter replacement

• If the water filter is dirty or clogged, the water pressure may drop or
  it may not work.

• After closing the water supply valve, disconnect the water purification filter
  connected to the branch T-valve and the bidet water feed hose, and then connect a new water filter.
  After replacing the water filter, open the water supply valve and check for leaks and operation.

Bidet cleaning

• When cleaning the bidet, be sure to disconnect the power plug, and be careful not to let water
  come into contact with the plug and outlet.

• Remove the contaminated area with a soft cloth, etc., and do not use a scrubber, benzene, thinner,
  bleach, or detergent.
  After cleaning, use a soft dry cloth to remove moisture and connect the power plug.

Winter bidet management (freeze prevention)

• If the toilet is exposed to the outside, keep the room temperature in the bathroom so that it
  does not drop below freezing in winter season.

• The freeze prevention function of the bidet prevents freezing by automatically raising the water
  temperature to 68℉(20℃) or higher or flowing water through the nozzle cleaning hole for about
  30 seconds when the internal temperature drops below 41℉(5℃).

How to use

Use the toilet seat temperature at level 1 or level 2 when used by persons requiring
attention as follows. Children, the elderly, people with weak skin, or taking sleep
stimulants (sleeping pills, cold medicine), etc. may cause low-temperature burns or
accidents, so be careful.

Sit on the toilet seat.
Sit in close contact with the seat sensor of the toilet seat.
It won’t work if you’re wearing clothes and sitting or the seat sensor is not in contact with your skin.

Stop
Press “Stop” to stop “Rear/Move”, “Front/Move”, “Dry”, “Nozzle Clean”, “Rhythm Massage” and
“Kids” functions.

Rear/Move Front/Move

• It is used for Rear ( Posterior ) cleaning or Front ( Feminine ) cleaning.
• Press the button once more and the nozzle moves back and forth to clean.
• The function works for 5 minutes, and the sitz bath can be washed at a constant temperature.

Dry

Dry with warm air for 3 minutes and automatically stop.
It stops working when you get up from the toilet seat or press “Stop”.
Prior to drying operation use tissue to reduce moistures. It will help reduce drying time.

Nozzle Position

• Press “◀” (forward) or “▶” (backward) to adjust the nozzle position from 1 to 5 levels.

• Each time the nozzle position is changed, the nozzle position is displayed for 3 seconds,
  and after 3 seconds, it returns to the water pressure control display.

• For “Rear” or “Front” operation, the nozzle position is executed from the last set position.
  When the product is shipped, it is set to 3 levels.

• LED lighting steps :

Water Pressure
Press “+”(High) or “-” (Low) to adjust the water pressure level from 1 to 5 levels.
When the product is shipped, it is set to 3 levels.
LED lighting steps :
The water pressure level works with the water pressure set before use.

How to use

Dry Temp

• Press “+ “(High) or “-” (Low)” to adjust the drying temperature from 1 to 6 levels.
• The water pressure LED will switch to the drying temperature indication.
• When the drying function is stopped, the water pressure setting LED is displayed.
• When the function is activated, it operates at the drying temperature set before use.
• LED lighting steps:

Water Temp

The warm water temperature can be adjusted in 4 levels.
LED lighting steps:

※ Freeze protection: When the water outlet temperature drops below 41°F(5°C), it automatically
raises the water outlet temperature to 68°F (20°C) or higher or runs water for up to
30 seconds to prevent freezing.

Seat Temp

• The seat temperature can be adjusted in 4 steps.
• LED lighting steps:

※ Low-temperature burn prevention：If the seat temperature is above 98.6℉ (37℃) after
10 minutes of sitting, the low-temperature burn function is activated to reduce the seat
temperature to 98.6℉ (37℃) to prevent low-temperature burns.

Depending on the ambient temperature of the bidet, the toilet seat temperature
may also change.
When not using the bidet, closing the cover prevents the seat from getting cold
and saves electricity.

Nozzle Clean

Nozzle Clean (Manual) – without sitting on the toilet

• Press once : Clean the nozzle-tip by spraying hot water for 1 minute.

• Double press : The nozzle moves forward and stops. At this time, use a soft brush to clean
  the contaminated area.

• After 5 minutes of manual cleaning, or press “Stop”, the nozzle will return.
  ※ If you press the nozzle cleaning button while sitting on the toilet, only the tip of the nozzle will be
  automatically cleaned and the operation will stop.

Nozzle Clean (Automatic)

• Automatically cleans the nozzle before starting the “Rear/Front” function.
• After the “Rear/Front” function is finished, the nozzle tip automatically moves back and forth twice to
  spray hot water into the nozzle to clean the nozzle.

Rhythm massage
When you press the rhythm massage, ①Soft cleaning, ② Impact massage,
③ Soft cold and hot massage, ④ Impact cold and hot massage, ⑤ Finish rinse cleaning are
performed for 5 minutes. Rhythm Massage is a “Rear” only function and cannot be used with
“Front” or “Kids” functions.

Smart Care

• The temperature of “warm water, toilet seat, and drying” is automatically adjusted, so even users
  who are not familiar with temperature control, such as children and the elderly, can use it safely and
  conveniently.

• Press once : The smart care LED turns on and the temperature is automatically adjusted.
  Even when Smart Care is in operation, it can be used by adjusting the water temperature,
  seat temperature, and dry temperature.

• Press again to turn off the LED, stop the smart care function, and switch to manual mode.

Kids

The nozzle position is set in 5 level according to the body shape of the child.
Water pressure (level 1), water temperature (level 2), and drying temperature (level 2) start
at a low level.
Children’s “Rear” washing is operated in the form of a move, and if you press “Front” during
operation, it is converted to a children’s bidet.

Eco / Power

• Press once : The LED turns on and Eco mode is set, and the toilet seat temperature is set to 77°F (25°C).
• Double press : The LED is off and Eco mode is released.
• Press and hold : If the button is pressed for more than 3 seconds, the power to all LEDs and heating
  parts is cut off.
  Press repeatedly to turn the power back on.

When using Eco mode on a cold day, the toilet seat may initially be cold.

Deodorize (KL600 only)

• Press once : The fan runs for 3 minutes to remove odors through the filter.
• Press repeatedly to cancel deodorization mode.

Night light mode

• When the sensor detect light and beams dark, it automatically turns on the light and automatically

※ Convenient function ( Operate with the remote control )

• Disable night light function : Press “Stop” and “Rear” at the same time for more than 3 seconds.

• Silent mode : Press “Stop” and “Front” at the same time for more than 3 seconds.

• Seat sensor release : Press “Stop” and Water Pressure “-” at the same time for more than
  3 seconds.

• Press repeatedly to switch functions.

Remote control model function table

Remote control model function comparison table ※ Features may vary by

model.

Division

|

KL600

|

KL601

---|---|---

Cleaning

function

|

Cleaning method

|

Instantaneous warm water

|

Instantaneous warm water

Rear cleaning

|

O

|

O

Front cleaning

|

O

|

O

Move cleaning

|

O

|

O

Bubble cleaning

|

O

|

O

Rhythm massage

|

O

|

O

Cleanliness hygiene

function

|

Nozzle cleaning

|

O

|

O

Nozzle structure

|

Single nozzle

|

Single nozzle

Nozzle material

|

Stainless steel

|

Stainless steel

Deodorization

|

O

|

X

Water filter (optional)

|

X

|

X

Comfortable convenient function

|

Remote control

|

RF Type

|

RF Type

Smart care

|

O

|

O

Night light

|

O

|

O

Nozzle position adjustment

|

O

|

O

Power saving

|

O

|

O

Water temperature control

|

O

|

O

Seat temperature control

|

O

|

O

Drying temperature control

|

O

|

O

Water pressure control

|

O

|

O

Seat soft opening and closing

|

O

|

O

Kids

|

O

|

O

Simple body detachment

|

O

|

O

Safety

function

|

Seat sensor

|

O

|

O

Self-diagnosis

|

O

|

O

Low-temperature burn prevention

|

O

|

O

Freeze protection

|

O

|

O

Troubleshooting

※ Please check before applying for service.

Problem

|

Checklist

---|---

No water is

coming out.

|

• Check the water supply shutoff.

• Check that the water supply valve is closed.

• Check if the mesh filter (water filter) is clogged.

The product is

not working.

|

• Check that the power plug is plugged into an outlet.

• Check when to replace the batteries on the remote control.

• Check if the Eco/Power status of the remote control is off mode.

• If the filter is clogged, water will not be supplied and it will not work.

• If you do not sit on the toilet seat, the seat sensor does not detect it and the product does not work.

Water is leaking.

|

• Check the piping connections and in case of body leakage, contact  the place of purchase.

The washing water pressure is weak.

|

• Check the mesh filter ( water filter ) for foreign objects.

When the toilet  seat and cleaning  water are not

warm

|

•Make sure the warm water and toilet seat temperature

settings are turned off.

•Check if the set temperature is set low.

• If the toilet seat is not warm, check if the power saving mode.

Nozzle does

not move.

|

• Check that the power plug is plugged into an electrical outlet.

• If the nozzle does not work even when the cleaning or bidet function button is pressed, contact the dealer.

When drying is  not warm

|

• Make sure the drying set temperature is off.

• Check if the set temperature is set low.

The main unit

is shaking.

|

• Tighten the mounting bolts, which are installation accessories.

When drying stops  in the middle

|

• The drying function stops after a certain period of time.

 Press the dry button once more.

※ It will not work if you are sitting while wearing clothes or if the seat sensor is not in contact with  your skin. (Except when using the “Kids” function)

Specifications

Model No.

|

KL600

|

KL601

---|---|---

Rated voltage

|

120V~, 50-60Hz

Rated power consumption

|

1 450W

Length of Power cord

|

about 4.9ft ( 1.5 meters )

Water supply method

|

Direct inlet flow type

Requested water pressure range

|

10.15-108.8 psi ( 0.07-0.75MPa )

Water supply control

|

Static pressure solenoid valve

Warm water cleaning

device

|

Heat exchange system

|

Instantaneous heating method

Water

volume

|

Rear cleansing

|

0.13-0.18 gal/min ( 0.5-0.7L/min )

Front cleansing

|

0.13-0.18 gal/min ( 0.5-0.7L/min )

Water pressure control

|

5 Levels ( Rear / Front )

Warm water temperature control

|

4 Levels [ OFF (1 Levels) – 4 Levels ]

Nozzle position control

|

5 Levels

Water heater capacity

|

1 400W

Safety device

|

Temperature sensor, Bimetal, Temperature fuse

Heated toilet seat device

|

Toilet seat temperature control

|

4 Levels [ OFF (1 Levels) – 4 Levels ]

Seat heater capacity

|

50W

Safety device

|

Temperature sensor, Temperature fuse

Drying

device

|

Warm air temperature control

|

6 Levels [ OFF (1 Levels) – 6 Levels ]

Drying heater

|

290W

Safety device

|

Bimetal, Temperature fuse

Deodorization

|

Activated carbon

|

X

Air bubble cleaning

|

O

|

O

Etc

|

Remote control

|

RF Type ( battery : 2 AA size )

Seat sensor

|

Capacitive sensor

Lighting function

|

High Brightness Blue LED

Water filter

|

Option / Sediment Filter

Body material

|

PP

Requested water temperature range

|

41 – 95℉ ( Recommend 50 – 86℉ )

5 – 35℃ ( Recommend 10 – 30℃ )

Product size

(W x L x H)

|

Elongated

|

15.8″ × 21.1″ × 6.1″ ( 402mm × 537mm × 154mm )

Round

|

15.8″ × 19.8″ × 6.1″ ( 402mm × 504mm × 154mm )

Product weight ( Net )

|

7.49lb (3.4kg)

|

7.27lb (3.3kg)

※ These specifications are subject to change without prior notice

Warranty Card

Warranty Card

Thank you very much for purchasing this product.

The product is warranted according to the description written on this warranty card.

Please submit this warranty card to service center when there are malfunctions.

Model :

Serial NO :

Purchaser

Company :

Address :

City : Country :

Phone : Fax : E-mail :

Dealer (Company)

Address :

Purchase Date : Installation Date :

When a fault occurs in the case of normal use from purchase date (subject to the invoice),  you can enjoy free maintenance service within one year.

Notice :

1. If the product malfunctions due to impurities.

2. When the product was thrown or hit and cause damage or malfunction.

3. Use of an organic solvent such as thinner cause deformation or deterioration of appearance.

4. When using non-genuine parts or consumable caused by fault.

5. When using non-normal voltage caused by fault.
   ( Example : When using 220V power for 120V product )

6. When customers disassemble the product, resulting in lost or damaged parts.

7. When repair or modify through non-designated service center technician caused malfunction.

8. When a fault occurs due to natural disasters. (Lightning, fire, earthquake, flood, etc.)

9. When due to not following the instruction caused malfunction.

10. Other conditions due to customers’ intentional or negligent caused fault.

11. Damage caused by accident, misuse, or abuse is not covered by this warranty.

12. Improper care and cleaning will void the warranty.

13. Proof of purchase (original sales receipt) must be provided to Intertec Co. with all warranty claims.

14. Intertec Co. is not responsible for labor charges, installation, or other incidental or consequential
    costs other than those noted above.

15. In no event shall the liability of Intertec Co. exceed the purchase price of the electric cleansing seat.

16. Please be sure to provide all pertinent information regarding your claim, including a complete
    description of the problem, the product, model number, the date the product was purchased,
    from whom the product was purchased and the installation date.

17. This warranty is to the original consumer purchaser only, and excludes product damage due to
    installation error, product abuse, or product misuse, whether performed by a contractor, service
    company, or the consumer.

18. Never use cleaners containing abrasive cleansers, ammonia, bleach, acids, waxes, alcohol,
    solvents or other products not recommended for stainless steel or polypropylene plastic.

19. The foregoing warranties are in lieu of all other warranties, express or implied, including
    but not limited to the implied warranties of merchantability and fitness for a particular purpose.

20. Intertec co.,Ltd. and / or seller disclaim any liability for special, incidental or consequential
    damages.

※ Please keep the warranty as it will not be reissued.

Intertec Co., Ltd. https://intertec.co.kr 18

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B  digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential  installation. This equipment generates, uses and can radiate radio frequency  energy and, if not installed and used in accordance with the instructions, may  cause harmful interference to radio communications. However, there is no  guarantee that interference will not occur in a particular installation. If this  equipment does cause harmful interference to radio or television reception, which  can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the  receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution

Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may  not cause harmful interference, and (2) this device must accept any interference  received, including interference that may cause undesired operation.

RF Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Warranty Card Warranty Card

Address : 15, Dongtangiheung-ro, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel : +82-31-8015-2620. Fax : +82-31-8015-2625

https://intertec.co.kr

References

• (주)인터텍 – 인터텍비데, (주)인터텍, 클롬 탱크리스 비데, 나비잠 온수매트. 매트&커버

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>