BRLab Z202301AL Sleep Enhancer Mattress User Manual

June 13, 2024
BRLab

BRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1
\(15\)

BRLab Z202301AL Sleep Enhancer Mattress

BRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1 \(15\)

Product Information

The Sleep Enhancer is a mattress equipped with Sleep Recording and Enhancement functions. It comes in two models: Sleep Enhancer A and Sleep Enhancer B. The mattress dimensions are approximately 1100mm x 2000mm x 100mm and it weighs around 10kg. The electrical requirements are 100-240V~ 50/60Hz, and the power consumption is 60VA. The mattress is powered by a power adapter and cable provided with the device.

Product Specifications

  • Sleep Enhancer A (Front)
    • Connect to power
    • As board connect to
    • Microphone
    • Reset button
    • Main LED
    • Sub LED
    • Humidity sensor
  • Sleep Enhancer B (Back)
    • A board connect to
    • Stimulator connect to
  • Mattress Bottom
    • NTC connect to
    • PVDF connect to
    • FSR sensor connect to
    • Main LED
    • Sub LED
    • Humidity sensor

Product Internal Diagram

Unfortunately, the user manual does not provide the internal diagram of the product.

Product Usage Instructions

Precautions for Safety

  • Ensure to only use the power adapter and cable provided with the device. Using other adapters may cause product failure, overheating, fire, explosion, or.
  • Do not arbitrarily disassemble, repair, or modify the product. Contact the customer center when repair is required.
  • Do not subject the product to strong impacts such as dropping or jumping on it from above. This can cause damage to the internal sensor.
  • Do not expose the product to extremely high or low temperatures as it may cause short circuit or overheating.
  • Avoid exposing the product to liquids as they may cause malfunction and increase the risks of electrocution.
  • Do not allow foreign substances (liquid, dust, metal powder, pencil lead, etc.) to enter the power connection of the product as it may cause explosion or fire.
  • Do not install the product in a humid place as it may cause fire or electric shock.
  • If the product has been exposed to wetness or water, immediately disconnect it from the power source, being mindful of the risks of electrocution.
  • The product is designed for indoor use and is not waterproof or moisture-proof.

Coin Battery Precautions

The product includes coin batteries. When replacing the battery, make sure to use a battery recommended by the manufacturer througha Zable authorized repairer. Using the wrong type of battery may result in an explosion. Dispose of batteries according to local laws or regulations and do not dispose of them in a fire or hot oven that may cause an explosion, or mechanically crush or cut them.

Product Specifications

Product Specifications and Names of Each MattressBRLab-Z202301AL-Sleep-
Enhancer-Mattress-FIG-1 \(1\)

  1. Sleep Enhancer A / As
  2. Sleep Enhancer B
  3. Stimulator

Sleep Enhancer A the front

BRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1 \(2\)

  1. Connect to power
  2. As board connect to
  3. Microphone
  4. Reset button
  5. Main LED
  6. Sub LED
  7. Humidity sensor

BackBRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1
\(3\)

  1. B board connect to

Sleep Enhancer B backBRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1
\(4\)

  1. A board connect to
  2. Stimulator connect to

BottomBRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1
\(5\)

  1. NTC connect to
  2. pvdf connect to
  3. fsr sensor connect to
  4. fsr sensor connect to
  5. Main LED
  6. Sub LED
  7. Humidity sensor

Power adapter and cable

Enhancer connection cableBRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1
\(7\)

Sleep Enhancer As Front

Sleep Enhancer As is included only for 2 person bed the

  1. A board connection
  2. microphone is the same as the rear part of A.

Product Internal Diagram

BRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1
\(9\)

Product Information

Item Description
Product Name Mattress
Model Z202301AL
Electrical Requirements 100-240 V~ 50/60Hz 60 VA
Power Consumption 12V d.c. / 2W (TBD)
Operating Temperature -10 ~ 50°C
Dimensions and Weight 10kg (TBD) / 1100mm x 2000mm x 100mm
Hardware Sleep Enhancer A

– CPU: Quad-core ARM Cortex-A35, Memory: DDR3 SDRAM 4G, Storage: eMMC 5.1, 16GB

 | Sleep Enhancer B

– 800/400MHz 32-bit ARM9, Memory: DDR2 64MB

---|---
Software| Sleep Enhancer A

–       OS: RK3326 embedded linux(kernel 4.4 or higher) Sleep Enhancer B

–       OS: RTOS

interface and peripherals| Wifi: 2.4Ghz Bluetooth: BLE 4.0
Manufacturer| BRLAB Inc.

Precautions for safety

  • Ensure to only use the power adapter and cable provided with the device. Using other adapters may cause product failure, overheating, fire, explosion, or.
  • Do not arbitrarily disassemble, repair, or modify the product, and contact the customer center when repair is required. Warranty does not apply to products that have been arbitrarily disassembled.
  • Do not subject the product to strong impacts such as dropping it or jumping on it from above. This can cause damage to the internal sensor.
  • Do not expose the product to extremely high or low temperatures. Short circuit or overheating may occur inside the product.
  • Ensure not to expose the product to liquids. Liquids may cause malfunction and increase the risks of electrocution.
  • Be careful not to allow foreign substances (liquid, dust, metal powder, pencil lead, etc.) to enter the power connection of the product. Explosion or fire may occur due to corrosion of power terminals or temporary short circuit (short circuit).
  • Do not allow foreign substances such as beverages or water to enter the product Insure that the device is not to be submerged underwater at any times.This may cause malfunction or electric shock.
  • Do not install in a humid place. It may cause fire or electric shock.
  • If the product has been exposed to wetness or water, immediately disconnect the product from the power source. Be mindful of the risks of electrocution when doing so. This product is designed for indoor use and is not waterproof or moisture proof.

Coin Battery Precautions

  • Coin batteries are included in the product. Battery replacement must be replaced with a battery recommended by the manufacturer through a Zable authorized repairer.
  • If the battery is replaced with the wrong type, there is a risk of explosion.
  • When disposing of batteries, dispose of them in accordance with local laws or regulations.
  • Do not dispose of the battery in a fire or hot oven that may cause an explosion, or mechanically crush or cut the battery.
  • Do not place the battery in a high temperature environment that may cause an explosion or leakage of flammable liquid or gas.
  • Keep the battery out of reach of children. If your child swallows a battery or enters the body, you should seek treatment immediately.

Product Description

  • This product includes hardware and software that helps you record, analyze and improve your sleep

Product Installation

This product is intended to be used as part of a mattress or topper and the instructions for installing the product will be based on that.

  1. Place the Zable mattress on the bed frame you are using.BRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1 \(10\)
  2. Connect the power cable to the adapter.BRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1 \(11\)Insert the adapter into the power connection at the head of the mattress as shown in the diagram below.BRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1 \(12\)
  3. Connect the power cable to the adapter and plug it into an outlet.f\.
  4. When the power is connected, the product automatically initiates a melody that indicates its readiness to be used.

For 2 persons

  1. Place the mattress on the frame as shown below. As shown in the image below, place the mattress with Sleep Enhancer A on the right and the mattress with Sleep Enhancer As on the left.BRLab-Z202301AL-Sleep-Enhancer-Mattress-FIG-1 \(14\)
  2. Connect the two enhancers with the cable provided. The connection part is located on the far left as shown in the picture above

zable_sleep_enhancer_manual_23.07.D0 BRLab Inc. Z202301AL
FCCID: 2A992-Z202301AL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals