Thinsulate TEGERA T6030 Cold Weather Safety Gloves Instructions
- June 4, 2024
- Thinsulate
Table of Contents
Thinsulate TEGERA T6030 Cold Weather Safety Gloves
INSTRUCTIONS FOR USE
Carefully read these instructions before using this product.
EXPLANATION OF PICTOGRAMS
0 = Below the minimum performance level for the given individual hazard X= Not
submitted to the test or test method not suitable for the glove design or
material
Warning! For minimal risks only. This product is designed to provide
protection for minimal risks only, certified according to PPE Regulation (EU)
2016/425 and PPE Regulation (EU) 2016/425 as amended and brought into UK law.
Do not use these gloves near moving elements or machinery with unprotected
parts.
EN ISO 21420:2020 PROTECTIVE GLOVES – GENERAL REQUIREMENTS AND TEST
METHODS
Finger dexterity test: Min. 1; Max. 5
FITTING AND SIZING: All sizes comply with EN ISO 21420:2020 for comfort,
fit, and dexterity, if not explained on the front page. If the short model
symbol is shown on the front page, the glove is shorter than a standard glove,
in order to enhance the comfort for special purposes – for example, fine
assembly work. Only wear the products in a suitable size. Products that are
either too loose or too tight will restrict movement and will not provide the
optimal level of protection.
STORAGE AND TRANSPORT: Ideally stored in dry and dark condition in the
original package, between +10º – +30ºC.
INSPECTION BEFORE USE: Check that the glove does not present holes,
cracks, tears, color changes etc. If the product becomes damaged it will NOT
provide the optimal protection and must be disposed of. Never use a damaged
product.
SHELF LIFE: The nature of the materials used in this product means that
the life of this product cannot be determined as it will be affected by many
factors, such as storage conditions, usage etc.
CARE AND MAINTENANCE
The user bares sole responsibility for submitting the product to mechanical
washing after use, as unknown substances can contaminate the product during
use and may affect the performance levels of the product. To care for your
product, we recommend that you rinse in cold water and line dry in room
temperature.
DISPOSAL: According to local environmental legislation.
ALLERGENS: This product may contain components that may be a potential
risk to allergic reactions. Do not use in case of hypersensitivity signs. For
more information contact Ejendals.
DECLARATION OF CONFORMITY
www.ejendals.com/conformity
- OUTER MATERIAL SPECIFICATION Polyester, leather
- INNER MATERIAL SPECIFICATION Polyester
- SIZE RANGE (EU) 8, 10
ONLY FOR EURASIAN ECONOMIC COMMUNITY CUSTOMS UNION MEMBERS
jandals ab
Limavägen 28, SE-793 32 Leksand, Sweden
Phone +46 (0) 247 360 00 | Fax +46 (0) 247 360 10
info@ejendals.com |
order@ejendals.com |
www.ejendals.com
Declaration of Conformity
www.ejendals.com/conformity