Scotsman BL1048S Ice Machine System Instruction Manual

June 13, 2024
Scotsman

Scotsman BL1048S Ice Machine System

Scotsman BL1048S Ice Machine System-PRODUCT

Product Information

Scotsman Ice Machine on BL1048S, BL1360S, or BL1660S Upright Ice Storage Bin

The Scotsman ice machine can be placed on a BL1048S, BL1360S, or BL1660S upright ice storage bin. The bin top comes secured to the bin and has a large opening that needs to be covered by the ice machine and/or filler panels. The bin is shipped with the
appropriate filler panels, gasket, and sealant to support most Scotsman ice machines. The installation procedure is the same for all applications, but panel and gasket placement may vary depending on the bin and machine configuration.

Installation Instructions

  1. Refer to the table on page 2 to identify the appropriate drawing for your specific ice machine and bin configuration.
  2. Position the filler panel(s) according to the location noted on the appropriate drawing.
  3. Peel the paper backing from the adhesive portion of the filler panel(s) and apply them to the bin top.
  4. Apply the inner gasket around the perimeter of the ice drop opening. Make sure not to overlap the gasket.
  5. Position and apply the outer gasket according to the location noted on the appropriate drawing.
  6. Apply sealant to the inside edge of the inner gasket that will seal the machine and the bin.
  7. Carefully position the ice maker onto the bin.

BL1048S, BL1360S, and BL1660S Bin Top Installation Instructions Contents:

BL1048S

  • Bin top and opening:
  • Filler Panels (2):
  • BL1048S – Single 22 Cuber
  • BL1048S – Single 30 Cuber
  • BL1048S – Two 22 Cubers
  • BL1048S – Single EH330/430 or MC330L/430

BL1360S/BL1660S

  • Bin top and opening:
  • Filler Panels (2):
  • BL1360S/BL1660S – Single 22 Cuber
  • BL1360S/BL1660S – Single 30 Cuber
  • BL1360S/BL1660S – Two 22 Cubers
  • BL1360S/BL1660S – Single EH330/430 or MC330L/430

Contact Information:

SCOTSMAN ICE SYSTEMS
101 Corporate Woods Parkway
Vernon Hills, IL 60061
800-726-8762
www.scotsman-ice.com

Instructions for the placement of a Scotsman ice machine on a BL1048S, BL1360S, or BL1660S upright ice storage bin.

Overview

The bin top is secured to the bin at the factory and has a large opening that must be covered by ice machine(s) and/or filler panel(s). Each bin ships with the appropriate filler panels, gasket, and sealant to support most Scotsman ice machines. The general procedure for installing the top is the same for all applications, however panel and gasket placement varies by bin/machine configuration.

Installation

  1. Identify appropriate drawing for the specific ice machine and bin configuration using the table on page 2.
  2. Position filler panel(s) according to location noted on appropriate drawing.
  3. Peel paper backing from adhesive portion of filler panel(s) and apply to bin top.
  4. Apply inner gasket around perimeter of ice drop opening. Do not overlap gasket.
  5. Position and apply outer gasket according to location noted on appropriate drawing.
  6. Apply sealant to inside edge of inner gasket that will seal machine and to bin.
  7. Carefully position ice maker onto bin.

BL1048S, BL1360S, and BL1660S Bin Top Installation Instructions

BL1048S

  • Bin top and opening:
  • Filler Panels (2):Scotsman BL1048S Ice Machine System-FIG1Also included:
    • Self adhesive gasket
    • Sealant
  • BL1048S – Single 22″ Cuber
  • BL1048S – Single 30″ CuberScotsman BL1048S Ice Machine System-FIG2
  • BL1048S – Two 22″ Cubers
  • BL1048S – Single EH330/430 or MC330L/430Scotsman BL1048S Ice Machine System-FIG3
  • BL1048S – Single 48″ Cuber
  • BL1048S Single 30″ Flake or NuggetScotsman BL1048S Ice Machine System-FIG4
  • BL1048S – Single 22″ Flake or Nugget
  • BL1048S-Single 42″ FlakeScotsman BL1048S Ice Machine System-FIG5
  • BL1048S – Two 22″ Flake or Nugget

BL1048S, BL1360S, and BL1660S Bin Top Installation Instructions

BL1360S/BL1660S
  • Bin top and opening:

  • Filler Panels (2):Scotsman BL1048S Ice Machine System-FIG7
    Also included:

    • Self adhesive gasket
    • Sealant
  • BL1360S/BL1660S – Single 22″ Cuber

  • BL1360S/BL1660S – Single 30″ CuberScotsman BL1048S Ice Machine System-FIG8

  • BL1360S/BL1660S – Two 22″ Cubers

  • BL1360S/BL1660S – Single EH330/430 or MC330L/430Scotsman BL1048S Ice Machine System-FIG9

  • BL1360S/BL1660S – Single 48″ Cuber

  • BL1360S/BL1660S – Single 30″ Flake/NuggetScotsman BL1048S Ice Machine System-FIG10

  • BL1360S/BL1660S – Single 22″ Flake/Nugget

  • BL1360S/BL1660S – Single 42″ FlakeScotsman BL1048S Ice Machine System-FIG11

  • BL1360S/BL1660S – Two 22″ Flake or Nugget

SCOTSMAN ICE SYSTEMS
101 Corporate Woods Parkway Vernon Hills, IL 60061
800-726-8762
www.scotsman-ice.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals