HongHuiDa Toy Factory 20230904M7 Seven Color Remote Control Flashing Light Instructions
- June 13, 2024
- HongHuiDa Toy Factory
Table of Contents
HongHuiDa Toy Factory 20230904M7 Seven Color Remote Control Flashing Light
Instructions
Important Note
- Please read this user guide carefully.
- Please keep the usage guide properly. Please be sure to include this user guide when handing over the product to others for use.
- Please pay attention to a warning prompts and follow all instructions in the user guide.
- For your safety, please do not place the product in areas with high temperatures or humidity.
Warning: Do not place the product in a place with corrosive chemicals to avoid corrosion and damage.
- This product contains precision electronic circuits. If maintenance is required, please contact authorized maintenance personnel. Unauthorized disassembly may cause product malfunction and is not covered by our company’s warranty.
- This product has passed RoHS CE certification. Please refer to national standards for use and operation. Improper use and operation may cause machine damage, which is not covered by the warranty. Users can pay for repairs.
- This user guide is strictly tested and developed by our company. The phone and specifications are subject to change without prior notice.
Standardized use of equipment
- Carefully read this user guide, especially the “Important Tips” section.
- Use and store this product under the working conditions specified in this user guide.
- If the product is not used in accordance with this user guide or does not comply with the specified working or storage conditions, it will be considered as illegal use.
Item List
Seven color flashing light x1
Type-C charging cable x1
M Velcro x3
Remote control x1
Product Introduction
Product charging instructions and remote control battery
Product charging: Connect the USB charging cable to the power supply, and then connect the other end of the USB charging cable plug to the product charging port.
The remote control uses 1 CR2032 button battery.
Usage
- Long press (2 seconds) to turn on the power. short press to adjust the mode. Double-click to switch (green light), there is a vibration function, it stops after 15 seconds of work, and it starts to work again with vibration.
- Vibration mode, vibrate on the light, continue to stand still for 15 seconds to turn off the light, long press the remote control after turning off the light Point
- Vibration mode switching.
a. Receive the button to quickly press twice to switch the mode, (green
light flashes to turn on vibration.) Mode) (blue light flashes to turn off
vibration mode)
b. Press and hold the middle button of the remote control to exit the
vibration mode
c. When there is no vibration for two houre in vibration mode, it will go
to cleop Light color: white, red, green, blue, yellow, pink, ice blue. Mode:
Seven-color flash flash, seven-color slow flash, four-color continuous light,
civil aviation mode, circulation mode and other more than 30 kinds of memory
function modes
Function switching: turn off the light in vibration mode, long press to turn on the light Burst function: Short press to enter burst mode, long press to exit vibration mode Constant light function: Short press to enter constant light mode
Specification parameters
| Built in battery | 3.7V 600mAh | charging | 5V1A |
|---|---|---|---|
| Charginginterface | Type-C | Charging time | About 120 minutes |
| colour | White. Red. Green. Blue. Yellow. Purple, Sky Blue | set up | Fast strobe |
light. slow strobe light
weight| 36.5 g| size| 55×60,2×18.9mm
Usage time| When flashing, it can be used for about 12 hours and stay on for
about 3.5 hours
*The brightness data is an average data, and there may be slight differences in brightness between different lights.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.