welltime Connection Kit with Pop Up Eccentric Instruction Manual
- June 3, 2024
- welltime
Table of Contents
Design connection kit with POP-UP eccentric
91189110-59869941
Istallations Instructions
Connection kit
Instruction, No.: 20219118911059869941
Connection Kit with Pop Up Eccentric
Reproduction, even in extracts, is not permitted!
IMPORTANT: PLEASE KEEP THIS DOCUMENT FOR LATER REFERENCE! READ CAREFULLY!
Proper use
Any use other than that described here or modification to the product is not
permitted and may lead to damage to persons or property.
There is also the risk of injury and loss of life. The product is intended for
personal use only and not for medical or commercial use.
Safety notes
- Only allow experts carry out the installation work.
- CAUTION DAMAGE BY WATER! Prior to installation please turn the general water supply off. – Ensure that all gaskets have the correct fit.
- The connection kit is not suitable for use on low-pressure devices and open (unpressurised) small electric storage units.
- We recommend the installation of a filter into the appliance or at least the use of angle valves with filter, in order to avoid the inflow of foreign matter, which could damage the cartridge.
- This tap is only intended for use in private households! Only suitable for use in rooms with a temperature over 0 °C, when there is danger of frost, sut off the water supply and empty the tap.
- CAUTION! Take care when adjusting the warm water. Danger of scalding!
- Incorrectly installed connection kits can cause flooding!
- Please ensure that no caustic or corrosive products such as detergents or household cleaning products make contact with the connection hoses; this can lead to water damages.
- Despite careful production, sharp edges can occur. Please exercise caution!
- Eccentric not suitable for washbasins without overflow!
Technical data
- Flow pressure: Recommended as 1.5 to 6 bar; in case of more than 6 bar connection pressure, we recommend that a pressure reducer is installed
- Water temperature: max. 60 °C
Instructions for care
Sanitary connection kits require particular care.
Therefore, please observe the following instructions:
- Chrome-plated surfaces are sensitive to lime-dissolving agents, acidic cleaning agents and all kinds of abrasives.
- Never clean coloured surfaces with abrasive, corrosive, or alcoholic agents.
- Clean the items with clear water only, using a soft cloth or leather.
Tools required
Packaging content
Assembly step 1
Assembly steps 2+3
- Do not twist or tension pipes! At first use check connections for leaktightness!
- We do not assume any warranty for correct installation – in particular for subsequent damages!
- After installing the tap please unscrew the mixer nozzle, flush the pipeline and the tap thoroughly for a longer time, in order to flush out contaminations and residues.
Disposal
To protect it against transport damage, your design connection kit is
delivered in robust packaging. The packaging consists of recyclable materials.
Dispose it in an environmentally suitable manner.
Do not throw the product into the normal domestic waste at the end of its
service life, but ask your municipal administration about the possibility of
an environmentally riendly disposal.
Maintenance
- Please check all joints and connections for leaks or visible damages at regular intervals.
- In case of leaks or visible damage to the connection hoses, these should be checked and replaced by an expert immediately.
Decommissioning
- Cut off the water supply before dismantling the product.
- Pay attention to escaping residual water.
- Disassemble the product in the reverse order of the assembly instructions.
The illustrations are to be considered as figurative representations,
deviations of the product are possible. Subject to technical modifications.
Our service
Our service team will provide you with immediate specialist advice:
– Germany:
Telephone 01806-63 06 30, Landline 20ct/call, mobile Telephone connection max.
60 ct/call
– Austria, Universal: Telephone +43 / 662-4485 59 landline depending on
provider,
Home improvement expert service – Otto: +43 / 316-606 159 landline depending
on provider, Home improvement expert service – Quelle: +43 / 662-9005 59
landlinede pending on provider, Home improvement expert service
– Switzerland, Quelle: DE: +41 / 848 85 85 00,
FR: +41 / 848 85 85 01,
I: +41 / 848 858 530
Ackermann:
DE: +41 / 848 85 85 11, FR: +41 / 848 85 85 21, I: +41 / 848 858 530
– The Netherlands: call center 0900-1901 (15ct/min.)
In order to assist you more efficiently, please tell us the:
product designation: Design connection kit with POP-UP Exzenter
91189110-59869941 and item number you used to order the item (see invoice).
Imported by AproductZ GmbH, Werner-Otto-Straße 1-7, 22179 Hamburg (Germany)
BD-BAD-DAS-91189110-59869941_0521