YENKEE YKB 3700US Low profile mechanical RGB keyboard User Manual

June 13, 2024
YENKEE

Low profile mechanical RGB keyboard

YENKEE YKB 3700US Low profile mechanical RGB keyboard -
Cover YKB 3700
USER´S MANUAL

YKB 3700US Low profile mechanical RGB keyboard

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Product Overview
1

Keyboard connection

Wired

  • Move the left switch on the right side of the keyboard back to the middle position.
  • Plug the included charging and data cable into the keyboard with the USB-C connector end and into your computer with the USB-A end.
  • Wait for the computer to automatically install the necessary drivers, and the system will inform you when the installation is complete.
  • Now the keyboard is ready for use.

Bluetooth

  • Move the left switch on the right side of the keyboard back to the left position.
  • On the device you want the keyboard to connect to, open the Bluetooth device menu.
  • The keyboard has the ability to pair up to three devices at the same time, but it is first necessary to pair the keyboard with the devices. The device can be switched using the keyboard shortcut FN + Q/W/E. These are indicated by a red/green/blue LED in the top left corner of the keyboard. Put the keyboard into pairing mode ­ select one of the options shown and the LED will flash rapidly with the appropriate LED colour.
  • Now hold the selected shortcut for 3 seconds and the LED will start to flash much slower.
  • The keyboard is now visible on the device it is to be paired with. Successful pairing is indicated by a static LED.
  • The keyboard remembers the device. If you have Bluetooth enabled on the paired device, just press the appropriate shortcut again (FN + Q/W/E) and the keyboard will automatically connect.
  • If the keyboard is idle for 5 minutes, the backlight is deactivated to save battery power. When you press any key, the keyboard will regain the backlight. If you do not use the keyboard for 30 minutes, a sleep mode is triggered that disconnects the keyboard from the active device. After pressing any button, the keyboard reconnects to the last device.

2.4GHz

  • Move the left switch on the right side of the keyboard back to the right position.
  • Remove the included USB receiver from the package and insert it into an available USB slot on your computer.
  • Press the FN+G keyboard shortcut for 3 seconds until the indicator on the top left side of the keyboard starts to flash yellow slowly.
  • Wait for the automatic connection to the receiver and the installation of the drivers, the system will notify you when it is complete.
  • Now the keyboard is ready for use, the success of the connection is confirmed by a static yellow indication.
  • If the keyboard is idle for 5 minutes, the backlight is deactivated to save battery power. When you press any key, the keyboard will regain the backlight. If you do not use the keyboard for 30 minutes, a sleep mode is triggered that disconnects the keyboard from the active device. After pressing any button, the keyboard reconnects to the last device.

Charging

  • The keyboard shortcut FN + Spacebar alerts you to the battery status in the form of green backlit buttons on a scale from F1­F10. Each key indicates 10% of the battery level.
  • If the battery is low, the corresponding LED in the top left corner of the keyboard will flash.
  • If you use the keyboard in wired mode, the keyboard is also recharged. The low battery indicator in the top left corner will glow a static red until it turns green. This indicates the keyboard is fully charged.

Keyboard shortcuts and functions

| Factory settings (hold for 3 seconds)
---|---
| Decrease the effect speed
| Increase the effect speed
| Decrease the effect brightness
| Increase the effect brightness
| Change the backlight effect
|  Change effect colour

Windows shortcuts
For Windows mode, move the right switch on the right side of the top back of the keyboard to the left position

| Previous track
---|---
| Pause/Run
| Next track
| Mute
| Decrease volume
| Increase volume
| Snippet
| Eject CD/DVD drive
| Lock the Windows button

MacOS features
For macOS mode, move the right switch on the right side of the top back of the keyboard to the right position

| Decrease brightness
---|---
| Increase brightness
| Mission Control / show running applications
| Keyboard language (OS Win) / Siri –
Dictation (MacOS)
| Option
| Command

The software for further keyboard settings is available to download at www.yenkee.eu, joined by its detailed user manual.

Working with the program

Using the software
The program greatly simplifies the use of the keyboard, whether for gaming or office use. It allows you to conveniently set not only the backlight, but also program useful functions or complex macros for maximum efficiency.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 1

The program tries to find the connected ROGUE keyboard.
If you are in mode:
Cable (switch on the back of the keyboard): please make sure the cable is properly connected to the computer and keyboard, or try disconnecting and reconnecting the cable.
2.4G: please check that the wireless USB receiver is properly connected to the computer, or try unplugging and plugging the receiver back in. Next, please make sure that the keyboard is charged using the indicator LED in the top left corner.
Bluetooth: please make sure the keyboard is connected to your device in your computer‘s Bluetooth settings.
Next, please make sure that the keyboard is charged using the indicator LED in the top left corner.

Main section
Here you can set special functions for individual keys, including combinations with Ctrl, Alt, Shift or Win, set your own macro functions, let the keys move the mouse, or turn off the key altogether and not use it. To set all this up, click on the desired key and then select it, see the instructions below. Deactivating a key can be done simply by clicking on the desired key and checking the Deactivate key checkbox. On any of the tabs, you can always select reset keyboard to factory settings in the bottom bar, or in case of multiple connected devices, select which one you want to manage.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 2

To configure a key, select one and left-click it.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 3

The menu in the first section offers the possibility of combining two buttons. For example, if you use one specific combination of two buttons very often, this is a faster way to trigger the combination. Simply select one of the 4 most used buttons on the left side of the window and then select any button to be pressed in combination with the first button. Confirm the changes using the blue “Confirm” button.

Thanks to the second section, you can easily assign a macro to the desired button.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 4

Simply select the correct macro from the menu and confirm.

The media section allows the button to be assigned multimedia functions ranging from controlling a music player to useful operating system functions.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 5

In the last section, you simply assign mouse functions to the button in question.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 6

The bottom menu bar offers the option to fully deactivate the button so that it doesn‘t get in the way of your gaming, for example, or you can reset it to its original settings with the “Reset” button.

Lighting section
In this part of the program you can set the type, colour, intensity and in some cases the speed of the keyboard backlight.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 8

At the top, above the macros themselves, there are functions to create a new macro, a new folder for macros, and to close all open folders in the menu.
Use the function on the left to create a new macro. This can then be modified directly in the list.
After the macro is created, we can upload the macro. The “Start” button in the second part of the section is used for this purpose. Once pressed, you can insert the desired sequence of buttons.

The exact sequence of keystrokes with their delay is then displayed in the keystroke list. And everything in this table can be modified by the program. Left-click the desired item and select one of the functions.
In the case of a keystroke, functions include changing the keystroke for another, adding a new keystroke with the desired delay, or even changing the mouse cursor coordinates. The menu above the list of keystrokes then gives the final indication of how the macro will be executed. You can select from a fixed number of repetitions, repetitions until a key is pressed or for the duration of the key hold.
Any changes in the macro must be saved by clicking the “Save” button in the upper right corner and reassigning the macro.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 9

Support Section
Under the Support tab, you can search for potential program or keyboard firmware updates, or change the language of the program‘s user interface.

YENKEE YKB 3700US Low profile mechanical RGB keyboard - Working with the
program 10

Other functions
If you use the keyboard for more than one purpose and have a different configuration for each, you‘ll be pleased to know that you can store it in separate profiles. This way you don‘t have to delete the configurations every time you change the activity, but simply select the desired profile. Click on the menu in the bottom right corner and create several profiles as you like. These can then be both edited and deleted. And in case of emergency, reset the keyboard to its original setting using the Reset function, which is also hidden in the bottom bar of the program.

Specification:
| Connection: Bluetooth 5.0 / 2.4G / wired | Plug: USB TYPE C | Switch type: Gateron Low Profile Brown | Switstyle: Tactile | Switch operation force: 55 ± 15 gf | Switch overall travel: 2.75 ± 0.25 mm | Switch actuation:1.5 ± 0.5 mm | Switch lifespan: 60,000,000 keystrokes | Keys: 85 | Anti Ghosting: N-Key Rollover | Backlight colourFull RGB 16.8M colors | Rated input: : 5V DC / 350 mA max. (USB C) | Max. transmitter power at 2.4 GHz – 2.4835 GHz: 3,2 mW | Built in battery: 2000 mAh (Lithium) | Working hours: up to 160 h (power saving mode) | Charging time:3 – 5 h | Dimensiones: 309 x 119 x 24.5 mm | Cable length: 1.5 m (removable Type C – included) | Material: ABS /aluminium / other | Keyboard weight: 435 g

System requirements:
| USB port | Windows 7/8/10/11 | Mac OS

Instructions and information regarding the disposal of used packaging

materials

Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at  your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.
Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.

Hereby, FAST ČR, a.s. declares that the radio equipment type [YKB 3700] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.yenkee.eu

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals