MIIDEX 100387 Rondo cct Hublot Instructions

RONDO CCT
CCT LED BULKHEAD + RF SENSOR

This product is guaranteed against any manufacturing defect for a period of 5 years

Item Number| Power| Frequency| Amperes| IP| CRI| IK
---|---|---|---|---|---|---
100387| 200-240V| 50/60Hz| 0.095A| 65| >80| 10

SAFETY NOTE

• Read the instructions carefully before use
• Keep these instructions while you use the device.
• Installation and maintenance are reserved for qualified people who can work on products that must be manually connected to 230V current
• Before any assembly action, cut off the power supply
• The light source of this luminaire is not replaceable; when the light source reaches its end of life, the entire luminaire must be replaced.
• Caution, risk of electric shock when opening the product. A
• This luminaire has a built-in power supply, just connect the luminaire to a 220-240VAC electrical supply to make it work.
• The integrated aspect of the power supply has an impact on the design of the luminaire and its installation and use.
• For the luminaire with an integrated power supply, the design is subject to ventilation problems linked to the cooling of an integrated power supply.
• This type of luminaire can be larger and heavier than a luminaire with a remote power supply
• Luminaire designed for direct installation on normally flammable surfaces
• Do not look at the luminaire in normal use for more than 10 seconds as this can be dangerous for the eyes.
• The luminaire should be positioned in such a way that prolonged viewing of the luminaire at a distance of less than 0 20 m is not possible.
• This product meets all the essential requirements of each of the directives applicable to it.
• At the end of its life, this product must be collected separately and must not be mixed with other household waste for the respect of human health and safety and for the conservation of natural resources.

FUNCTION

• Automatic switching based on movement and light level,
• Zero-crossing point operation helps protect the sensor against inrush currents.
• Super compact size makes it suitable for mounting in most fixtures.
• Easy-to-assemble 4-pole (L, N, N, L) plugin terminal
• The detection area, Time delay and daylight threshold can be precisely set via the DIP switch
• Large detection area, range up to 12 m in diameter.

TECHNICAL CHARACTERISTICS

*SPECIFICATION

SENSOR INFORMATION

Wall mounting diagram (unit: m)
Suggested installation height: 1.5m

Ceiling mounting diagram (unit: m)
Suggested installation height: 3m

CONNECTION-WIRE DIAGRAM

SETTINGS

1. Detection area:
   I= up to 100%
   II = up to 75%
   III = up to 50%
   IV = up to 25%
   V = up to 10%

2. Hold time:
   Refers to the time period the lamp remains at 100% illumination after no motion is detected
   l=5s
   II = 30s
   III = 90s
   IV = 3min
   V=20min
   Vi = 30min

3. Daylight sensor:
   The sensor can be set to only allow the lamp to illuminate below a defined ambient brightness threshold. Tea settings are as follows:
   I= 2lux, darkness operation only
   II= 10lux, darkness operation only
   III = 25lux, twilight operation
   IV = 50lux, twilight operation
   V = Disable

www.miidex.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>