Teknik 5421405 Open Storage Cabinet Instruction Manual

Open Storage Cabinet
Instruction Manual
Craft Collection
Model 5421405

Open Storage Cabinet

NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Assembly Tools Required

| No. 2 Phillips Screwdriver Tip Shown Actual Size
---|---
| Skip the power trip.
This time.

Part Identifi cation

• While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.

Hardware Identifi cation

• Screws are shown in actual size. You may receive extra hardware with your unit.

Step 1

• Assemble your unit on a carpeted fl for or on the empty carton to avoid scratching your unit or the fl poor.
• Push seventeen HIDDEN CAMS (1) into the ENDS (A and B), UPRIGHT (D), and BOTTOMS (E and F).

Step 2

• Turn seventeen CAM SCREWS (2) into the ENDS (A and BTOP (C), UPRIGHT (D), and BASE (H).

Step 3

• Insert two WOOD DOWELS (3) into the LEFT END (B) and UPRIGHT (D).
• Fasten the LEFT END (B) and UPRIGHT (D) to the LEFT BOTTOM (E). Tighten four HIDDEN CAMS.
• NOTE: Be sure the WOOD DOWELS in the LEFT END and UPRIGHT insert into the holes in the LEFT BOTTOM.

Step 4

• Fasten the RIGHT BOTTOM (F) to the UPRIGHT (D). Tighten two HIDDEN CAMS.
• Insert one WOOD DOWEL (3) into the RIGHT END (A).
• Fasten the RIGHT END (A) to the RIGHT BOTTOM (F). Tighten two HIDDEN CAMS.
• NOTE: Be sure the WOOD DOWEL in the RIGHT END inserts into the hole in the RIGHT BOTTOM.
• Fasten four METAL BRACKETS (4) to the BOTTOMS (E and F). Use four SILVER 1/2″ PAN HEAD SCREWS (8).

Step 5

• Insert three WOOD DOWELS (3) into the ENDS (A and B) and UPRIGHT (D).
• Fasten the BASE (H) to the ENDS (A and B) and UPRIGHT (D). Tighten three HIDDEN CAMS.
• NOTE: Be sure the WOOD DOWELS in the ENDS and UPRIGHT insert into the hole in the BASE.
• Fasten the BASE (H) to the BOTTOMS (E and F). Use four SILVER 1/2″ PAN HEAD SCREWS (8).

Step 6

• Insert three WOOD DOWELS (3) into the center holes in the TOP (C).
• Fasten the TOP (C) to the ENDS (A and B) and UPRIGHT (D). Tighten six HIDDEN CAMS.
• NOTE: Be sure the WOOD DOWELS in the TOP insert into the hole in the ENDS and UPRIGHT.

Step 7

• Carefully turn your unit onto its front edges.
• Position the BACKS (I and J) over your unit.
• NOTE : Be sure the holes in the BACKS line up over the UPRIGHT (D) and BOTTOMS (E and F).
• Fasten the BACKS (I and J) to the ENDS (A and B), TOP (C), UPRIGHT (D), and BOTTOMS (E and F). Use twenty-six SILVER 1/2″ FLAT HEAD SCREWS (7).

Step 8

• Carefully stand your unit upright.
• Push twenty-four METAL PINS (5) into the desired holes in the ENDS (A and B) and UPRIGHT (D).
• Set the ADJUSTABLE SHELVES (G) onto the METAL PINS (5).
• Peel a CAM COVER from the CAM COVER CARD (6) and stick one onto each visible HIDDEN CAM.
• NOTE: Please read the back pages of the instruction booklet for important safety information.
• This completes the assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.

WARNING
Please use your furniture correctly and safely. Improper use can cause safety hazards or damage to your furniture or household items. Carefully read the following safety information.
Death or serious injury may occur when children climb on furniture. A remote control, toys or other items placed on the furniture may encourage a child to climb on the furniture which could cause it to tip over and result in serious injury or death.
NEVER allow children to climb on furniture.
NEVER place toys, food, remote, etc. on top of furniture.
ALWAYS use either the safety hardware as instructed or other wall anchoring devices.
Placing audio and/or video equipment onto furniture, not specifi cally designed to support audio and/or video equipment may result in death or serious injury due to furniture collapse or tip-over.
NEVER place a TV on furniture that is not intended to support a TV.
This product is not designed to support a television unless a TV warning label is included and the instructions specifi cally state the size and weight of the television.
Overloading drawers and shelves may result in furniture that can break or sag or tip over which may result in injury.
NEVER exceed the weight limits shown in the instructions.
Place the heavier items on lower shelves as far back from the front as possible.
Load the bottom surfaces first to avoid top-heavy furniture.
Moving furniture that is not designed to be moved or equipped with casters may result in injury or damage to furnishings or personal property.
ALWAYS unload shelves and drawers, starting with the top surfaces, before moving.
NEVER push or pull furniture on the carpet. Have a friend help lift it properly to move and/or reposition it.

References

• Bedroom, Living Room and Office Furniture — Sauder Furniture Homepage
• Teknik Office - Office Seating Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>