Zambelis 22145 Pendant Light Instruction Manual
- June 13, 2024
- Zambelis
Table of Contents
22145 Pendant Light
Instruction Manual
22145 Pendant Light
Connecting the Terminal Block
Connect main supply (brown – Live, blue – Neutral) into terminal block making
sure all connections are tight. 
PENDANT LIGHT
22145 NI
Please read instructions before commencing installation and retain for future
reference.
SPECIFICATIONS
- Material: Metal + Smoked Glass + Opal Glass
- Lamp type: 3x G9 LED MAX 5W / Bulb
- Ingress Protection: IP20. Protection against entry of solid objects greater than 12mm in diameter.
INSTALLATION INSTRUCTIONS
Electrical products can cause death. injury, or damage to property. Maintenance and installation should only be carried out by a professional electrician.
- Ensure main supply is switched off.
- Insert masonry plugs (1) into mounting surface.
- Fit mounting bracket onto mounting surface with self-tapping screws (2).
- Connect main supply wires to terminal block (3) making sure all connections are tight.
- Fit ceiling plate onto mounting bracket with screws (4).
- The light is adjustable, place the cables in the position that works for you.
- Insert masonry plugs (5) into mounting surface. repeat three times.
- Fit mounting bracket onto mounting surface with self-tapping screws (6), repeat three times.
- Pass the cable through the hanging accessories and secure by screwing the safety caps (7), repeat three times.
- Use the rings to secure all glass shades on the lamp-holders (8).
- Install all G9 LED lamps into the lamp-holders, finally add the opal glasses (9).
- Reconnect power.
WARNING
- Make sure that the products is installed properly before connecting to electricity.
- Do not cover the fitting.
- Not for outdoor use or in wet conditions.
- Do not exceed the maximum wattage ratting of the lamp.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>