Sunco PN24 HO-4060K LED Ceiling Panel Light Instruction Manual
- June 13, 2024
- SUNCO
Table of Contents
2×4 LED SELECTABLE CEILING PANEL
Installation Manual
EASY INSTALLATION
Recessed Mount
-
Turn off circuit breaker before installing.
-
Place Ceiling Panel face down on flat surface.
• Unscrew 2 driver covers and set aside screws. -
Pop out knockout (choice of 6).
• Optional: If using dimmer, pop out 2 nd knockout.
-
Use switches to choose CCT and brightness settings:
Brightness| CCT
---|---
-40W| -4000K
-50W| -5000K
-60W| -6000K -
Connect conduit to each knockout.
• Feed wires through. -
Connect supply wires to Ceiling Panel wires with included wire nuts:
• Black to Black (Live)
• White to White (Neutral)
• Green to Green (Ground)
OPTIONAL: To use dimming feature, connect pink and purple wires on Ceiling Panel to compatible dimmer (not included). -
Replace driver covers.
• Tighten screws. -
Bend 4 protective brackets located on back of Ceiling Panel up 90.
Turn brackets 90o . Hook should face outside edge of Ceiling Panel.
WIRING DIAGRAM
SPECIFICATIONS
| Voltage | 100-277V |
|---|---|
| Wattage | 40W / 50W / 60W |
| Moisture Rating | Damp |
| Housing Material | SPCC+PS Lens |
| Weight | 4.18lbs |
| Warranty | 7 Years |
EASY INSTALLATION
Recessed Mount
-
Turn off circuit breaker before installing.
-
Place Ceiling Panel face down on flat surface.
• Unscrew 2 driver covers and set aside screws. -
Pop out knockout (choice of 6).
• Optional: If using dimmer, pop out 2 nd knockout.
-
Use switches to choose CCT and brightness settings:
Brightness| CCT
---|---
-40W| -4000K
-50W| -5000K
-60W| -6000K -
Connect conduit to each knockout.
• Feed wires through. -
Connect supply wires to Ceiling Panel wires with included wire nuts:
• Black to Black (Live)
• White to White (Neutral)
• Green to Green (Ground)
OPTIONAL: To use dimming feature, connect pink and purple wires on Ceiling Panel to compatible dimmer (not included). -
Replace driver covers.
• Tighten screws.
-
Drill 4 holes into ceiling.
-
Place anchors into hole, insert wire rope, and screw.
• Refer to suspension kit’s (not included) install manual for complete details. -
Adjust support rope/wire to ensure Ceiling Panel hangs horizontally.
-
Adjust light into ceiling and secure using protective brackets.
-
Turn on circuit breaker and test light.
WARNING
To reduce the risk of fire, electric shock, or physical injury:
- Turn off circuit breaker before installing this fixture.
- This product should be installed by a person familiar with the construction and operation of the product and hazards involved. Safety eyeglasses and gloves are recommended.
- Abide by related regional and local laws or regulations.
- Proper grounding is required to ensure safety.
- Check for shipping damage before installing. If the product is damaged, do not use it.
- Keep fixture away from corrosive substances.
- Clean fixture regularly to ensure proper operation. Do not clean with harsh solvents.
- Use safety precautions and abide by regional and local laws or regulations.
- This product is not compatible with 3rd party sensors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>