WilTec Wildange 64097 Chick Heating Plate Instruction Manual
- June 13, 2024
- WilTec Wildange
Table of Contents
Operating instructions
Chick Heating Plate
64097–64116
Illustration similar, may vary depending on model
64097 Chick Heating Plate
Please read and follow the operating instructions and safety information prior
to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating manual, nor
in the diagrams and illustrations shown. Although WilTec Wildanger Technik
GmbH has made every possible effort to ensure that this operating manual is
complete, accurate, and up-to-date, errors cannot be ruled out entirely. If
you have found an error or wish to suggest an improvement, we look forward to
hearing from you. Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
E-mail: [email protected]
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
To return your goods for exchange, repair, or other purposes, please use the
following address. Attention! To allow for a trouble-free complaint or return,
it is important to contact our customer service team before returning your
goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: [email protected]
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Safety instructions
- The main cable must be firmly plugged into the device to avoid bad connections and damage of the device.
- The upper main control panel and heating system must not be cleaned with water.
- Keep away device from water.
Overview
№| Name| №| Name
1| Control panel| 5| Setting lock
2| Heating plate| 6| Rubber mat
3| Adjusting bar| 7| Setting switch
4| Power cable| |
Method for installing the adjusting bar and troubleshooting
The setting switch is found on the heat-plate lock of the rear side of the
main board. Press the setting switch to adjust the height up- or downwards.
Set the position desired, then let the setting switch go.
The height of the heating plate can be set accordingly to the temperature
needed.
№| Explanation
1| Press the setting switch.
2| At the same time, slide in the adjusting bar.
3| Proceed likewise for the other bars.
Initiation to the functions of the control panel
- Range of temperature display of the main regulator: 0–99 ℃ / 32–100 ℉
- Range of temperature setting: 10–60 ℃ / 50–140 ℉
- Keys: Set key, Up key, Down key
- The factory-set temperature is 48 ℃. The heating plate controls the heating system automatically; thus, it works accordingly to the temperature set.
- Heating begins automatically when the temperature is 1 ℃ below the setting. When the temperature reaches the setting, heating stops automatically.
- The temperature setting range and height of the inner part of the heating plate can be set accordingly to the ambient temperature.
Method of setting the temperature
Press the Set key. The number “48” lights up. Press the Up key to increase
the setting. Press the Down key to lower the setting. Afterwards, press the
Set key to save the settings or have the settings set automatically after 10
s.
Sensor error display
When the temperature sensor fails or is not connected, the temperature
display shows “EE;” the electric heating switches off at the same time.
Technical specifications
Item num- ber| Power supply| Power (W)| Temperature setting
range (℃)
---|---|---|---
64097| ****
230 V / 50 Hz
| 13| ****
10–60
64098| 22
64099| 42
64100| 66
64101| 13
64102| 22
64103| 42
64104| 66
64105| 13
64106| 20
64107| 30
64108| 25
64109| 50
64110| 60
64111| 13
64112| 20
64113| 30
64114| 25
64115| 50
64116| 60
Regulations for waste disposal
The Waste Electrical and Electronic Equipment Directive (WEEE Directive,
2012/19/EU) of the EU was implemented in the German law related to electrical
and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled
with the symbol of a crossedout wheeled rubbish bin. This symbol indicates
that this electric device must not be disposed of with the domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR
(Stiftung ElektroAltgeräte Register) under the WEEE-registration number
DE45283704.
Disposal of used electrical and electronic devices (intended for use in the
countries of the European Union and other European countries with a separate
waste collection system for these devices). The symbol on the packaging or the
product itself indicates that this product must not be treated as normal
domestic waste but must be disposed of at a recycling collection station for
electrical and electronic waste. By disposing of this product correctly, you
contribute to the protection of the environment and the health of your fellow
people. Inappropriate disposal threatens the environment and health.
Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by
your local commune, the municipal waste disposal facilities, or the store
where you purchased the product.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
52249 Eschweiler Germany
Important note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH
Item 64097–64116
http://www.fudajo.com
07 2023-1